Carbide Taper End Mills (work material: Quenched and tempered steel)

• 

  Taper Square End Mills (Carbide) (26)

• 

  Taper Ball End Mills (Carbide) (16)

• 

  Taper Radius End Mills (Carbide) (6)

• 

  • Volume Discount

  OSG

  2-Flute Taper Blade, Short, FX-MG-TPDS

  Achieves high levels of efficiency and long operational life due to the FX coating. Able to handle a wide range of materials ranging from general materials to hardened steel.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 20	0.5 ～ 12	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	2	3 ～ 20	40 ～ 120

  Ordinarie pris (exklusive MOMS):

  76.47 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide tapered end mill, 2-flute / regular model

  [Features] As the cutting edge has been machined into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 30	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	2 ～ 24	-	2	4 ～ 12	50 ～ 70

  Ordinarie pris (exklusive MOMS):

  52.73 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  For Rib Grooves, Taper End Shape, FXS-RB-TPE

  High rigidity taper end mill enables high efficiency machining of rib grooves. Side surface machining except on grooves is also possible.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 3	0.4 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80

  Ordinarie pris (exklusive MOMS):

  91.40 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  EIKOSHA

  Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)

  Reverse Taper Machining, Twisted (High-efficiency, high-precision)

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	2 ～ 12	Tapered radius	Quenched and tempered steel[○]	3 ～ 25	0.3 ～ 0.5	2	3 ～ 12	40 ～ 70

  Ordinarie pris (exklusive MOMS):

  104.67 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  NTER-2X X-Coating Taper Radius End Mill

  Tapered radius end mill suitable for 56 HRC or less.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Flat surface machining, side machining, groovingcorner shape: radius

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 10	1 ～ 6	Tapered radius	Quenched and tempered steel[◎]	4 ～ 20	0.2 ～ 2	2	4 ～ 12	45 ～ 80

  Ordinarie pris (exklusive MOMS):

  114.70 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide tapered end mill, 4-flute / regular

  [Features] -The 4-slot shape is ideal for machining angled side surfaces-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	12 ～ 35	-	4	4 ～ 16	60 ～ 90

  Ordinarie pris (exklusive MOMS):

  65.71 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  NER-2 Trapezoidal Runner End Mill

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminium alloy.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75

  Ordinarie pris (exklusive MOMS):

  117.44 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NS TOOL

  MTE230 MUGEN-COATING Tapered End Mill

  Adopts Infinity coating to achieve a longer life, even for taper machining

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 20	0.2 ～ 10	Tapered square	Quenched and tempered steel[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100

  Ordinarie pris (exklusive MOMS):

  69.95 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  DIJET

  One Cut Super Radius End Mill DV-OCSRTN

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0°50' ～ 1°	2 ～ 16	Tapered radius	Quenched and tempered steel[◎]	3 ～ 24	0.5 ～ 3	3	6 ～ 20	70 ～ 220

  Ordinarie pris (exklusive MOMS):

  122.71 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  DIJET

  One Cut Ball Long Type DZ-OCLB-T

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0°57' ～ 2°52'	4 ～ 12	Taper ball	Quenched and tempered steel[◎]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280

  Ordinarie pris (exklusive MOMS):

  238.01 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes

  MISUMI

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  [Features] -Since the cutting edge has been processed into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 2	0.4 ～ 2	Tapered square	Quenched and tempered steel[◎]	2 ～ 12	-	4	3 ～ 4	40 ～ 50

  Ordinarie pris (exklusive MOMS):

  65.98 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  [Features] -Indispensable item for corrugating plastic channels-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  5 ～ 15	-	Taper ball	Quenched and tempered steel[◎]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75

  Ordinarie pris (exklusive MOMS):

  76.91 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  MISUMI

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  [Features] -R of the tip is also effective in suppressing chipping-Crescent shape with good discharge of cutting chip even with small diameter-It has coating with high oxidation resistance and high hardness, and achieves long service life. Due to the coating characteristics, it is suitable for high speed machining and dry machining.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  -	-	Taper ball	Quenched and tempered steel[◎]	-	0.1 ～ 0.3	1	4	45

  Ordinarie pris (exklusive MOMS):

  49.33 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Carbide Tapered End Mill NTE-2

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: Aluminium alloy, Resin

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 20	0.5 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70

  Ordinarie pris (exklusive MOMS):

  91.69 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Taper Ball End Mill

  [Material] ○: Carbon steel, alloy steel/tool steel, heat-treated steel, stainless steel◎; copper, aluminium alloy, resin.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 10	-	Taper ball	Quenched and tempered steel[◎]	10 ～ 35	0.5 ～ 3	2	4 ～ 16	50 ～ 100

  Ordinarie pris (exklusive MOMS):

  114.70 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  The original NS design with high rigidity enables high-precision and high-efficiency machining.[Material]○: Heat-treated steel, hardenable steel (up to 55 HRC), stainless steel, titanium alloy, aluminium alloy, resin◎: Carbon steel, steel alloy/tool steel, copper.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.25 ～ 3	0.2 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80

  Ordinarie pris (exklusive MOMS):

  78.34 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  X Coated Taper Medium Blade End Mill NTEM-2X

  Medium size taper milling cutterTool material: Ultra fine grain carbideHelix angle: 30°Surface treatment: X-coatingNumber of cutting edges: 2Machining applications: Grooving, side milling

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 15	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	4 ～ 30	-	2	3 ～ 16	35 ～ 90

  Ordinarie pris (exklusive MOMS):

  113.37 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  EIKOSHA

  Carbide Solid Taper End Mill (Medium)

  Equal Twist

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	Quenched and tempered steel[○]	4 ～ 40	-	2	3 ～ 25	40 ～ 110

  Ordinarie pris (exklusive MOMS):

  99.07 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  EIKOSHA

  Carbide Solid Long Taper Ball End Mill

  Twist Long

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1ﾟ ～ 30'	-	Taper ball	Quenched and tempered steel[○]	6 ～ 50	0.5 ～ 5	2	4 ～ 25	55 ～ 150

  Ordinarie pris (exklusive MOMS):

  107.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ATOM

  Taper End Mill 2 Flutes

  A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1° ～ 30′	0.1 ～ 3	Tapered square	Quenched and tempered steel[○]	0.5 ～ 12	-	2	3 ～ 10	35 ～ 50

  Ordinarie pris (exklusive MOMS):

  76.04 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  UNION TOOL

  HTNRS 4-Flute Taper Neck Radius End Mill

  [Features] · A 4-flute tapered neck radius end mill. Ideal for machining high hardness materials. · The corner radius design from the edge to the periphery ensures less cutting resistance, and the variable pitch design minimizes chattering and vibration. · Provides stable machining and a high quality machined surface, even with deep milling applications. · The HARDMAX coating ensures a long tool life, even when machining high hardness materials. · Compatible with all coolants.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.4 ～ 0.9	1 ～ 4	Tapered radius	Quenched and tempered steel[◎]	1 ～ 4	0.2 ～ 1	4	4 ～ 6	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  83.22 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  MISUMI

  TSC series carbide tapered ball end mill, 4-flute / long model

  (Select the shortest possible blade length to maintain rigidity)-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70

  Ordinarie pris (exklusive MOMS):

  76.05 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

  [Features] -Indispensable item for corrugating plastic channels-The coating has high oxidation resistance, high hardness and long life. Effective in high-speed machining and dry machining as coating properties.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  5 ～ 15	1.5 ～ 4	Tapered radius	Quenched and tempered steel[◎]	3 ～ 6.5	0 ～ 1	2	4 ～ 8	40 ～ 50

  Ordinarie pris (exklusive MOMS):

  66.56 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  OSG

  2-Flute Taper Blade Short MG-TPDS

  Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 7	1 ～ 12	Tapered square	Quenched and tempered steel[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110

  Ordinarie pris (exklusive MOMS):

  73.67 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  4-Flute Taper Blade Short MG-TPMS

  Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 3	2 ～ 12	Tapered square	Quenched and tempered steel[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90

  Ordinarie pris (exklusive MOMS):

  81.57 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Carbide End Mill (Trapezoid Runner) MG-TRC

  Tapered Blade End Mill For Trapezoidal Runner Machining Uses high toughness, super hard alloys.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75

  Ordinarie pris (exklusive MOMS):

  84.50 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  For Rib Grooves, Taper Ball End Shape, FXS-RB-TPB

  High rigidity taper end mill enables high efficiency machining of rib grooves. Free-form curved surface machining is also possible.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 25	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60

  Ordinarie pris (exklusive MOMS):

  94.82 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  For Rib Grooves, with Corner R, Taper Shape, FXS-RB-TPCR

  Radius end type of high rigidity taper end mill enables high efficiency machining of rib grooves.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 1.5	1 ～ 1.5	Tapered radius	Quenched and tempered steel[◎]	8 ～ 12	0.2	multi-edged	4	45

  Ordinarie pris (exklusive MOMS):

  84.35 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  UNION TOOL

  C-CTE2000 UT Coated 2-Flute Tapered

  [Features]· 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 15	0.2 ～ 2.5	Tapered square	Quenched and tempered steel[◎]	0.8 ～ 8	-	2	3 ～ 8	38 ～ 50

  Ordinarie pris (exklusive MOMS):

  109.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  UNION TOOL

  C-CTE4000 UT Coated 4-Flute Tapered

  [Features]· Taper end mill with extensive variations from taper half angle of 30' to 7°

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 7	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  111.36 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Tapered Long Blade End Mill NTEL-2

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; Copper, aluminium alloy.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 20	1 ～ 3	Tapered square	Quenched and tempered steel[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100

  Ordinarie pris (exklusive MOMS):

  119.36 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NS TOOL

  MTB230 MUGEN-COATING Tapered Ball End Mill

  Capable of simultaneous taper machining and ball machining

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1 ～ 15	-	Taper ball	Quenched and tempered steel[◎]	1 ～ 16	0.1 ～ 2	2	4 ～ 10	50 ～ 70

  Ordinarie pris (exklusive MOMS):

  114.04 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Carbide Tapered End Mill NTE-4

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 15	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  105.04 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  X Coated Taper End Mill NTE-2X

  [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	0.5 ～ 2.5	Tapered square	Quenched and tempered steel[◎]	2 ～ 4	-	2	3 ～ 4	35 ～ 45

  Ordinarie pris (exklusive MOMS):

  112.68 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  X Coated Taper End Mill NTE-4X

  [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  114.58 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Tapered Long Blade End Mill NTEL-4

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	3 ～ 6	Tapered square	Quenched and tempered steel[◎]	20 ～ 35	-	4	6 ～ 12	60 ～ 90

  Ordinarie pris (exklusive MOMS):

  128.03 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  Tapered Medium Blade End Mill NTEM-2

  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, Copper

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 20	1 ～ 4	Tapered square	Quenched and tempered steel[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  100.28 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110

  Ordinarie pris (exklusive MOMS):

  77.39 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NS TOOL

  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

  The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  0.5 ～ 5	-	Taper ball	Quenched and tempered steel[◎]	0.2 ～ 10	0.1 ～ 5	2	4 ～ 12	50 ～ 140

  Ordinarie pris (exklusive MOMS):

  110.77 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  EIKOSHA

  Carbide Solid Taper Ball End Mill

  Equal Twist

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1ﾟ ～ 30'	-	Taper ball	Quenched and tempered steel[○]	4 ～ 40	0.5 ～ 8	2	4 ～ 25	45 ～ 90

  Ordinarie pris (exklusive MOMS):

  103.46 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  ATOM

  Taper Ball End Mill 2 Blades

  A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1° ～ 30′	0.1 ～ 3	Taper ball	Quenched and tempered steel[○]	0.5 ～ 12	0.05 ～ 1.5	2	3 ～ 10	35 ～ 55

  Ordinarie pris (exklusive MOMS):

  113.92 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  EIKOSHA

  Carbide Solid Tapered End Mill CSTE

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1ﾟ ～ 30'	0.5 ～ 16	Tapered square	Quenched and tempered steel[○]	2 ～ 65	-	2	3 ～ 32	35 ～ 140

  Ordinarie pris (exklusive MOMS):

  100.40 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  EIKOSHA

  Carbide Solid Tapered End Mill (Long) CSTEL

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  1ﾟ ～ 30'	1 ～ 6	Tapered square	Quenched and tempered steel[○]	10 ～ 35	-	2	4 ～ 12	50 ～ 90

  Ordinarie pris (exklusive MOMS):

  102.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  KYOWA SEIKO

  Carbide Tapered Neck Ball End Mill KTBL-2

  The neck has a taper for a longer effective length. Ideal for deep engraving.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  -	0.2 ～ 6	Taper ball	Quenched and tempered steel[○]	0.4 ～ 14	0.1 ～ 3	-	6 ～ 8	100 ～ 120

  Ordinarie pris (exklusive MOMS):

  121.78 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  OSG

  2-Flute Short MG-TPBDS

  Carbide is used as the blade material.Blade length (mm) 10Corner/ball radius (mm) 1.25, single angle (°) 5Large end diameter (mm) 4.04, number of flutes (pcs.) 2Shank diameter (mm) 6, overall length (mm) 45.

  Mer information

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)
  5	-	Taper ball	Quenched and tempered steel[○]	10	-	-	6	45

  Ordinarie pris (exklusive MOMS):

  110.85 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera