Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Single corner (θ)(Degree)
  • Tip diameter (D)(φ)
  • Type
  • work material
  • Blade length (l)(mm)
  • R Size(mm)
  • Number of flutes(sheet)
  • Tillverkare
    • 45 poster
    * Information om dagar till leverans, fraktkostnader och priser
    Lista
    Foto
    Jämför specifikationer
  • 1
    • 2-Flute Taper Blade, Short, FX-MG-TPDS
      • Volume Discount

      OSG

      2-Flute Taper Blade, Short, FX-MG-TPDS

      Achieves high levels of efficiency and long operational life due to the FX coating. Able to handle a wide range of materials ranging from general materials to hardened steel.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.5 ～ 12Tapered squareAluminum[○]2 ～ 40-23 ～ 2040 ～ 120
      Ordinarie pris (exklusive MOMS):
      76.47 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL
      • Volume Discount

      NS TOOL

      Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL

      Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 51 ～ 8Tapered squareAluminum[◎]8 ～ 64-24 ～ 2050 ～ 130
      Ordinarie pris (exklusive MOMS):
      127.93 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide tapered end mill, 2-flute / regular model

      [Features] As the cutting edge has been machined into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 300.5 ～ 6Tapered squareAluminum[○]2 ～ 24-24 ～ 1250 ～ 70
      Ordinarie pris (exklusive MOMS):
      52.73 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • NTER-2X X-Coating Taper Radius End Mill
      • Volume Discount

      NS TOOL

      NTER-2X X-Coating Taper Radius End Mill

      Tapered radius end mill suitable for 56 HRC or less.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Flat surface machining, side machining, groovingcorner shape: radius
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 101 ～ 6Tapered radiusAluminum[○]4 ～ 200.2 ～ 224 ～ 1245 ～ 80
      Ordinarie pris (exklusive MOMS):
      114.70 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 4-flute / regular
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide tapered end mill, 4-flute / regular

      [Features] -The 4-slot shape is ideal for machining angled side surfaces-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 53 ～ 10Tapered squareAluminum[○]12 ～ 35-44 ～ 1660 ～ 90
      Ordinarie pris (exklusive MOMS):
      65.71 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • NER-2 Trapezoidal Runner End Mill
      • Volume Discount

      NS TOOL

      NER-2 Trapezoidal Runner End Mill

      [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminium alloy.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      7 ～ 152 ～ 6Tapered squareAluminum[◎]5 ～ 12-24 ～ 1245 ～ 75
      Ordinarie pris (exklusive MOMS):
      117.44 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • MTE230 MUGEN-COATING Tapered End Mill
      • KAMPANJFÖRSÄLJNING
      • Volume Discount

      NS TOOL

      MTE230 MUGEN-COATING Tapered End Mill

      Adopts Infinity coating to achieve a longer life, even for taper machining
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.2 ～ 10Tapered squareAluminum[◎]0.8 ～ 35-24 ～ 2045 ～ 100
      Ordinarie pris (exklusive MOMS):
      69.95 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • One Cut Ball Long Type DZ-OCLB-T
      • Volume Discount

      DIJET

      One Cut Ball Long Type DZ-OCLB-T

      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0°57' ～ 2°52'4 ～ 12Taper ballAluminum[○]10 ～ 332 ～ 6210 ～ 16160 ～ 280
      Ordinarie pris (exklusive MOMS):
      238.01 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 4-flute / for deep ribbing
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide tapered end mill, 4-flute / for deep ribbing

      [Features] -Since the cutting edge has been processed into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 20.4 ～ 2Tapered squareAluminum[○]2 ～ 12-43 ～ 440 ～ 50
      Ordinarie pris (exklusive MOMS):
      65.98 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

      [Features] -Indispensable item for corrugating plastic channels-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      5 ～ 15-Taper ballAluminum[○]3 ～ 71 ～ 324 ～ 1040 ～ 75
      Ordinarie pris (exklusive MOMS):
      76.91 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

      [Features] -R of the tip is also effective in suppressing chipping-Crescent shape with good discharge of cutting chip even with small diameter-It has coating with high oxidation resistance and high hardness, and achieves long service life. Due to the coating characteristics, it is suitable for high speed machining and dry machining.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      --Taper ballAluminum[○]-0.1 ～ 0.31445
      Ordinarie pris (exklusive MOMS):
      49.33 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • Carbide Tapered End Mill NTE-2
      • Volume Discount

      NS TOOL

      Carbide Tapered End Mill NTE-2

      [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: Aluminium alloy, Resin
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.5 ～ 3Tapered squareAluminum[◎]2 ～ 10-23 ～ 1035 ～ 70
      Ordinarie pris (exklusive MOMS):
      91.69 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Taper Ball End Mill
      • Volume Discount

      NS TOOL

      Taper Ball End Mill

      [Material] ○: Carbon steel, alloy steel/tool steel, heat-treated steel, stainless steel◎; copper, aluminium alloy, resin.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 10-Taper ballAluminum[◎]10 ～ 350.5 ～ 324 ～ 1650 ～ 100
      Ordinarie pris (exklusive MOMS):
      114.70 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing
      • Volume Discount

      NS TOOL

      MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

      The original NS design with high rigidity enables high-precision and high-efficiency machining.[Material]○: Heat-treated steel, hardenable steel (up to 55 HRC), stainless steel, titanium alloy, aluminium alloy, resin◎: Carbon steel, steel alloy/tool steel, copper.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.25 ～ 30.2 ～ 3Tapered squareAluminum[◎]2 ～ 40-43 ～ 640 ～ 80
      Ordinarie pris (exklusive MOMS):
      78.34 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • X Coated Taper Medium Blade End Mill NTEM-2X
      • Volume Discount

      NS TOOL

      X Coated Taper Medium Blade End Mill NTEM-2X

      Medium size taper milling cutterTool material: Ultra fine grain carbideHelix angle: 30°Surface treatment: X-coatingNumber of cutting edges: 2Machining applications: Grooving, side milling
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 150.5 ～ 6Tapered squareAluminum[○]4 ～ 30-23 ～ 1635 ～ 90
      Ordinarie pris (exklusive MOMS):
      113.37 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Carbide Solid Taper End Mill (Medium)
      • KAMPANJFÖRSÄLJNING
      • Volume Discount

      EIKOSHA

      Carbide Solid Taper End Mill (Medium)

      Equal Twist
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      1ﾟ ～ 30'0.5 ～ 10Tapered squareAluminum[◎]4 ～ 40-23 ～ 2540 ～ 110
      Ordinarie pris (exklusive MOMS):
      99.07 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • Carbide Solid Long Taper Ball End Mill
      • Volume Discount

      EIKOSHA

      Carbide Solid Long Taper Ball End Mill

      Twist Long
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      1ﾟ ～ 30'-Taper ballAluminum[◎]6 ～ 500.5 ～ 524 ～ 2555 ～ 150
      Ordinarie pris (exklusive MOMS):
      107.20 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Taper End Mill 2 Flutes
      • KAMPANJFÖRSÄLJNING
      • Volume Discount

      ATOM

      Taper End Mill 2 Flutes

      A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      1° ～ 30′0.1 ～ 3Tapered squareAluminum[◎]0.5 ～ 12-23 ～ 1035 ～ 50
      Ordinarie pris (exklusive MOMS):
      76.04 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • DCTNB Diamond Coated 2-Flute Taper Neck Ball End Mill

        UNION TOOL

        DCTNB Diamond Coated 2-Flute Taper Neck Ball End Mill

        [Features] · A diamond coated taper neck ball end mill. Ideal for graphite electrode machining. · The tapered neck shape improves rigidity, providing high efficiency and high precision machining. · The unique diamond coating is ideal for graphite machining and provides excellent abrasion resistance. · Features a coating with excellent adhesive properties and an optimized blade shape, helping deliver a long service life.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        --Taper ballAluminum[○]0.8 ～ 1.60.5 ～ 12680 ～ 150
        Ordinarie pris (exklusive MOMS):
        189.70 €～
        Ordinarie avsändningsdatum:
        7 arbetsdagar
        Konfigurera
      • TSC series carbide tapered ball end mill, 4-flute / long model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • L (Long)

        MISUMI

        TSC series carbide tapered ball end mill, 4-flute / long model

        (Select the shortest possible blade length to maintain rigidity)-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        0.5 ～ 2-Taper ballAluminum[○]4 ～ 300.3 ～ 1.2544 ～ 645 ～ 70
        Ordinarie pris (exklusive MOMS):
        76.05 €～
        Ordinarie avsändningsdatum:
        5 arbetsdagar
        Konfigurera
      • TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

        [Features] -Indispensable item for corrugating plastic channels-The coating has high oxidation resistance, high hardness and long life. Effective in high-speed machining and dry machining as coating properties.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        5 ～ 151.5 ～ 4Tapered radiusAluminum[○]3 ～ 6.50 ～ 124 ～ 840 ～ 50
        Ordinarie pris (exklusive MOMS):
        66.56 €～
        Ordinarie avsändningsdatum:
        5 arbetsdagar
        Konfigurera
      • 2-Flute Taper Blade Short MG-TPDS

          OSG

          2-Flute Taper Blade Short MG-TPDS

          Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide
          Mer information
          Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
          0.5 ～ 71 ～ 12Tapered squareAluminum[○]5 ～ 40-24 ～ 2045 ～ 110
          Ordinarie pris (exklusive MOMS):
          73.67 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • 4-Flute Taper Blade Short MG-TPMS

            OSG

            4-Flute Taper Blade Short MG-TPMS

            Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 32 ～ 12Tapered squareAluminum[○]8 ～ 30-44 ～ 1245 ～ 90
            Ordinarie pris (exklusive MOMS):
            81.57 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide End Mill (Trapezoid Runner) MG-TRC
            • Volume Discount

            OSG

            Carbide End Mill (Trapezoid Runner) MG-TRC

            Tapered Blade End Mill For Trapezoidal Runner Machining Uses high toughness, super hard alloys.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            7 ～ 152 ～ 6Tapered squareAluminum[○]4 ～ 12-24 ～ 1245 ～ 75
            Ordinarie pris (exklusive MOMS):
            84.50 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Tapered Long Blade End Mill NTEL-2
            • Volume Discount

            NS TOOL

            Tapered Long Blade End Mill NTEL-2

            [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; Copper, aluminium alloy.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 201 ～ 3Tapered squareAluminum[◎]10 ～ 20-24 ～ 1645 ～ 100
            Ordinarie pris (exklusive MOMS):
            119.36 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • MTB230 MUGEN-COATING Tapered Ball End Mill
            • KAMPANJFÖRSÄLJNING
            • Volume Discount

            NS TOOL

            MTB230 MUGEN-COATING Tapered Ball End Mill

            Capable of simultaneous taper machining and ball machining
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1 ～ 15-Taper ballAluminum[◎]1 ～ 160.1 ～ 224 ～ 1050 ～ 70
            Ordinarie pris (exklusive MOMS):
            114.04 €～
            Ordinarie pris (exklusive MOMS):
            Specialpris
            Ordinarie avsändningsdatum:
            Lagervara: 1 arbetsdag
            Vissa artiklar kan skickas samma dag
            Konfigurera
          • Carbide Tapered End Mill NTE-4
            • Volume Discount

            NS TOOL

            Carbide Tapered End Mill NTE-4

            [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 153 ～ 10Tapered squareAluminum[◎]10 ～ 35-46 ～ 1650 ～ 90
            Ordinarie pris (exklusive MOMS):
            105.04 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • X Coated Taper End Mill NTE-2X
            • Volume Discount

            NS TOOL

            X Coated Taper End Mill NTE-2X

            [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 50.5 ～ 2.5Tapered squareAluminum[○]2 ～ 4-23 ～ 435 ～ 45
            Ordinarie pris (exklusive MOMS):
            112.68 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • X Coated Taper End Mill NTE-4X
            • Volume Discount

            NS TOOL

            X Coated Taper End Mill NTE-4X

            [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 53 ～ 10Tapered squareAluminum[○]10 ～ 35-46 ～ 1650 ～ 90
            Ordinarie pris (exklusive MOMS):
            114.58 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Tapered Long Blade End Mill NTEL-4
            • Volume Discount

            NS TOOL

            Tapered Long Blade End Mill NTEL-4

            [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 53 ～ 6Tapered squareAluminum[◎]20 ～ 35-46 ～ 1260 ～ 90
            Ordinarie pris (exklusive MOMS):
            128.03 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Tapered Medium Blade End Mill NTEM-2
            • Volume Discount

            NS TOOL

            Tapered Medium Blade End Mill NTEM-2

            [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, Copper
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 201 ～ 4Tapered squareAluminum[◎]5 ～ 20-24 ～ 1650 ～ 90
            Ordinarie pris (exklusive MOMS):
            100.28 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345
            • Volume Discount

            NS TOOL

            MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

            The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 2-Taper ballAluminum[○]0.75 ～ 4.50.5 ～ 23660 ～ 110
            Ordinarie pris (exklusive MOMS):
            77.39 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L
            • Volume Discount

            NS TOOL

            MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

            The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 5-Taper ballAluminum[◎]0.2 ～ 100.1 ～ 524 ～ 1250 ～ 140
            Ordinarie pris (exklusive MOMS):
            110.77 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Taper End Mill for Copper Electrode / Aluminum / Plastic DTE
            • Volume Discount

            NS TOOL

            Taper End Mill for Copper Electrode / Aluminum / Plastic DTE

            Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 51 ～ 10Tapered squareAluminum[◎]4 ～ 35-24 ～ 1645 ～ 90
            Ordinarie pris (exklusive MOMS):
            88.83 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Air Wheel Solid Taper End Mill
            • Volume Discount

            EIKOSHA

            Carbide Air Wheel Solid Taper End Mill

            Graphite Electrode Processing With Air Hole
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 74 ～ 12Tapered squareAluminum[◎]25 ～ 50-26 ～ 2090 ～ 120
            Ordinarie pris (exklusive MOMS):
            164.02 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Solid Taper Ball End Mill
            • Volume Discount

            EIKOSHA

            Carbide Solid Taper Ball End Mill

            Equal Twist
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1ﾟ ～ 30'-Taper ballAluminum[◎]4 ～ 400.5 ～ 824 ～ 2545 ～ 90
            Ordinarie pris (exklusive MOMS):
            103.46 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Taper Ball End Mill 2 Blades
            • Volume Discount

            ATOM

            Taper Ball End Mill 2 Blades

            A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1° ～ 30′0.1 ～ 3Taper ballAluminum[◎]0.5 ～ 120.05 ～ 1.523 ～ 1035 ～ 55
            Ordinarie pris (exklusive MOMS):
            113.92 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Air Hole Solid Taper Ball End Mill AHTBE
            • Volume Discount

            EIKOSHA

            Carbide Air Hole Solid Taper Ball End Mill AHTBE

            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5ﾟ ～ 30'-Taper ballAluminum[◎]25 ～ 502 ～ 626 ～ 2090 ～ 120
            Ordinarie pris (exklusive MOMS):
            177.11 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Graphite Solid Tapered End Mill GTE
            • Volume Discount

            EIKOSHA

            Carbide Graphite Solid Tapered End Mill GTE

            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1ﾟ ～ 30'4 ～ 12Tapered squareAluminum[◎]25 ～ 50-26 ～ 2090 ～ 120
            Ordinarie pris (exklusive MOMS):
            145.85 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Graphite Solid Tapered Ball End Mill GTBE
            • Volume Discount

            EIKOSHA

            Carbide Graphite Solid Tapered Ball End Mill GTBE

            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1ﾟ ～ 30'-Taper ballAluminum[◎]25 ～ 502R ～ 6R26 ～ 2090 ～ 120
            Ordinarie pris (exklusive MOMS):
            154.69 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Solid Tapered End Mill CSTE
            • Volume Discount

            EIKOSHA

            Carbide Solid Tapered End Mill CSTE

            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1ﾟ ～ 30'0.5 ～ 16Tapered squareAluminum[◎]2 ～ 65-23 ～ 3235 ～ 140
            Ordinarie pris (exklusive MOMS):
            100.40 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Solid Tapered End Mill (Long) CSTEL
            • Volume Discount

            EIKOSHA

            Carbide Solid Tapered End Mill (Long) CSTEL

            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            1ﾟ ～ 30'1 ～ 6Tapered squareAluminum[◎]10 ～ 35-24 ～ 1250 ～ 90
            Ordinarie pris (exklusive MOMS):
            102.21 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • 2-Flute Short MG-TPBDS

              OSG

              2-Flute Short MG-TPBDS

              Carbide is used as the blade material.Blade length (mm) 10Corner/ball radius (mm) 1.25, single angle (°) 5Large end diameter (mm) 4.04, number of flutes (pcs.) 2Shank diameter (mm) 6, overall length (mm) 45.
              Mer information
              Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
              5-Taper ballAluminum[○]10--645
              Ordinarie pris (exklusive MOMS):
              110.85 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill
              • Volume Discount

              NS TOOL

              MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

              [Features]· The lower part of the neck is tapered to improve tool rigidity, and MUGEN COATING Premium is used, which is ideal for milling high hardness material. · These synergistic effects provide deep engraving processing on high-precision and high-efficiency materials with high hardness.
              Mer information
              Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
              0.5 ～ 2-Taper ballAluminum[○]0.15 ～ 30.1 ～ 224 ～ 650 ～ 110
              Ordinarie pris (exklusive MOMS):
              54.81 €～
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • NERB-2 2-Flute Taper Ball End Mill For Runner
              • Volume Discount

              NS TOOL

              NERB-2 2-Flute Taper Ball End Mill For Runner

              Tapered ball end mill suitable for carbon steel to heat-treated steel.Tool material, Ultrafine grain cemented carbideHelix angle, 30°No. of Flutes: 2Machining Applications: Side Machining, Grooving, Curved Surface Machining
              Mer information
              Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
              10 ～ 20-Taper ballAluminum[◎]4 ～ 121 ～ 324 ～ 1250 ～ 90
              Ordinarie pris (exklusive MOMS):
              124.26 €～
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
          • 1

            • Kategorier som hör till Carbide Taper End Mills