Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Single corner (θ)(Degree)
  • Tip diameter (D)(φ)
  • Type
  • work material
  • Blade length (l)(mm)
  • R Size(mm)
  • Number of flutes(sheet)
  • Tillverkare
    • 48 poster
    * Information om dagar till leverans, fraktkostnader och priser
    Lista
    Foto
    Jämför specifikationer
  • 1
  • 2
  • Nästa
    • 2-Flute Taper Blade, Short, FX-MG-TPDS
      • Volume Discount

      OSG

      2-Flute Taper Blade, Short, FX-MG-TPDS

      Achieves high levels of efficiency and long operational life due to the FX coating. Able to handle a wide range of materials ranging from general materials to hardened steel.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.5 ～ 12Tapered squareCopper[○]2 ～ 40-23 ～ 2040 ～ 120
      Ordinarie pris (exklusive MOMS):
      76.47 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL
      • Volume Discount

      NS TOOL

      Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL

      Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 51 ～ 8Tapered squareCopper[◎]8 ～ 64-24 ～ 2050 ～ 130
      Ordinarie pris (exklusive MOMS):
      127.93 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide tapered end mill, 2-flute / regular model

      [Features] As the cutting edge has been machined into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 300.5 ～ 6Tapered squareCopper[○]2 ～ 24-24 ～ 1250 ～ 70
      Ordinarie pris (exklusive MOMS):
      52.73 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • For Rib Grooves, Taper End Shape, FXS-RB-TPE
      • Volume Discount

      OSG

      For Rib Grooves, Taper End Shape, FXS-RB-TPE

      High rigidity taper end mill enables high efficiency machining of rib grooves. Side surface machining except on grooves is also possible.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 30.4 ～ 3Tapered squareCopper[○]2 ～ 40-multi-edged3 ～ 835 ～ 80
      Ordinarie pris (exklusive MOMS):
      91.40 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • NTER-2X X-Coating Taper Radius End Mill
      • Volume Discount

      NS TOOL

      NTER-2X X-Coating Taper Radius End Mill

      Tapered radius end mill suitable for 56 HRC or less.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Flat surface machining, side machining, groovingcorner shape: radius
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 101 ～ 6Tapered radiusCopper[○]4 ～ 200.2 ～ 224 ～ 1245 ～ 80
      Ordinarie pris (exklusive MOMS):
      114.70 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 4-flute / regular
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide tapered end mill, 4-flute / regular

      [Features] -The 4-slot shape is ideal for machining angled side surfaces-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 53 ～ 10Tapered squareCopper[○]12 ～ 35-44 ～ 1660 ～ 90
      Ordinarie pris (exklusive MOMS):
      65.71 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • NER-2 Trapezoidal Runner End Mill
      • Volume Discount

      NS TOOL

      NER-2 Trapezoidal Runner End Mill

      [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminium alloy.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      7 ～ 152 ～ 6Tapered squareCopper[◎]5 ～ 12-24 ～ 1245 ～ 75
      Ordinarie pris (exklusive MOMS):
      117.44 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • MTE230 MUGEN-COATING Tapered End Mill
      • KAMPANJFÖRSÄLJNING
      • Volume Discount

      NS TOOL

      MTE230 MUGEN-COATING Tapered End Mill

      Adopts Infinity coating to achieve a longer life, even for taper machining
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.2 ～ 10Tapered squareCopper[◎]0.8 ～ 35-24 ～ 2045 ～ 100
      Ordinarie pris (exklusive MOMS):
      69.95 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • One Cut Ball Long Type DZ-OCLB-T
      • Volume Discount

      DIJET

      One Cut Ball Long Type DZ-OCLB-T

      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0°57' ～ 2°52'4 ～ 12Taper ballCopper[○]10 ～ 332 ～ 6210 ～ 16160 ～ 280
      Ordinarie pris (exklusive MOMS):
      238.01 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • TSC series carbide tapered end mill, 4-flute / for deep ribbing
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide tapered end mill, 4-flute / for deep ribbing

      [Features] -Since the cutting edge has been processed into a sharp corner, it is also possible to machine corner edges-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 20.4 ～ 2Tapered squareCopper[○]2 ～ 12-43 ～ 440 ～ 50
      Ordinarie pris (exklusive MOMS):
      65.98 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

      [Features] -Indispensable item for corrugating plastic channels-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      5 ～ 15-Taper ballCopper[○]3 ～ 71 ～ 324 ～ 1040 ～ 75
      Ordinarie pris (exklusive MOMS):
      76.91 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

      [Features] -R of the tip is also effective in suppressing chipping-Crescent shape with good discharge of cutting chip even with small diameter-It has coating with high oxidation resistance and high hardness, and achieves long service life. Due to the coating characteristics, it is suitable for high speed machining and dry machining.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      --Taper ballCopper[○]-0.1 ～ 0.31445
      Ordinarie pris (exklusive MOMS):
      49.33 €～
      Ordinarie avsändningsdatum:
      5 arbetsdagar
      Konfigurera
    • Carbide Tapered End Mill NTE-2
      • Volume Discount

      NS TOOL

      Carbide Tapered End Mill NTE-2

      [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: Aluminium alloy, Resin
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 200.5 ～ 3Tapered squareCopper[◎]2 ～ 10-23 ～ 1035 ～ 70
      Ordinarie pris (exklusive MOMS):
      91.69 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Taper Ball End Mill
      • Volume Discount

      NS TOOL

      Taper Ball End Mill

      [Material] ○: Carbon steel, alloy steel/tool steel, heat-treated steel, stainless steel◎; copper, aluminium alloy, resin.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 10-Taper ballCopper[◎]10 ～ 350.5 ～ 324 ～ 1650 ～ 100
      Ordinarie pris (exklusive MOMS):
      114.70 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing
      • Volume Discount

      NS TOOL

      MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

      The original NS design with high rigidity enables high-precision and high-efficiency machining.[Material]○: Heat-treated steel, hardenable steel (up to 55 HRC), stainless steel, titanium alloy, aluminium alloy, resin◎: Carbon steel, steel alloy/tool steel, copper.
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.25 ～ 30.2 ～ 3Tapered squareCopper[◎]2 ～ 40-43 ～ 640 ～ 80
      Ordinarie pris (exklusive MOMS):
      78.34 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • X Coated Taper Medium Blade End Mill NTEM-2X
      • Volume Discount

      NS TOOL

      X Coated Taper Medium Blade End Mill NTEM-2X

      Medium size taper milling cutterTool material: Ultra fine grain carbideHelix angle: 30°Surface treatment: X-coatingNumber of cutting edges: 2Machining applications: Grooving, side milling
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      0.5 ～ 150.5 ～ 6Tapered squareCopper[○]4 ～ 30-23 ～ 1635 ～ 90
      Ordinarie pris (exklusive MOMS):
      113.37 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Carbide Solid Taper End Mill (Medium)
      • KAMPANJFÖRSÄLJNING
      • Volume Discount

      EIKOSHA

      Carbide Solid Taper End Mill (Medium)

      Equal Twist
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      1ﾟ ～ 30'0.5 ～ 10Tapered squareCopper[◎]4 ～ 40-23 ～ 2540 ～ 110
      Ordinarie pris (exklusive MOMS):
      99.07 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • Carbide Solid Long Taper Ball End Mill
      • Volume Discount

      EIKOSHA

      Carbide Solid Long Taper Ball End Mill

      Twist Long
      Mer information
      Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
      1ﾟ ～ 30'-Taper ballCopper[◎]6 ～ 500.5 ～ 524 ～ 2555 ～ 150
      Ordinarie pris (exklusive MOMS):
      107.20 €～
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • DCTNB Diamond Coated 2-Flute Taper Neck Ball End Mill

        UNION TOOL

        DCTNB Diamond Coated 2-Flute Taper Neck Ball End Mill

        [Features] · A diamond coated taper neck ball end mill. Ideal for graphite electrode machining. · The tapered neck shape improves rigidity, providing high efficiency and high precision machining. · The unique diamond coating is ideal for graphite machining and provides excellent abrasion resistance. · Features a coating with excellent adhesive properties and an optimized blade shape, helping deliver a long service life.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        --Taper ballCopper[○]0.8 ～ 1.60.5 ～ 12680 ～ 150
        Ordinarie pris (exklusive MOMS):
        189.70 €～
        Ordinarie avsändningsdatum:
        7 arbetsdagar
        Konfigurera
      • TSC series carbide tapered ball end mill, 4-flute / long model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • L (Long)

        MISUMI

        TSC series carbide tapered ball end mill, 4-flute / long model

        (Select the shortest possible blade length to maintain rigidity)-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        0.5 ～ 2-Taper ballCopper[○]4 ～ 300.3 ～ 1.2544 ～ 645 ～ 70
        Ordinarie pris (exklusive MOMS):
        76.05 €～
        Ordinarie avsändningsdatum:
        5 arbetsdagar
        Konfigurera
      • TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

        [Features] -Indispensable item for corrugating plastic channels-The coating has high oxidation resistance, high hardness and long life. Effective in high-speed machining and dry machining as coating properties.
        Mer information
        Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
        5 ～ 151.5 ～ 4Tapered radiusCopper[○]3 ～ 6.50 ～ 124 ～ 840 ～ 50
        Ordinarie pris (exklusive MOMS):
        66.56 €～
        Ordinarie avsändningsdatum:
        5 arbetsdagar
        Konfigurera
      • 2-Flute Taper Blade Short MG-TPDS

          OSG

          2-Flute Taper Blade Short MG-TPDS

          Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide
          Mer information
          Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
          0.5 ～ 71 ～ 12Tapered squareCopper[○]5 ～ 40-24 ～ 2045 ～ 110
          Ordinarie pris (exklusive MOMS):
          73.67 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • 4-Flute Taper Blade Short MG-TPMS

            OSG

            4-Flute Taper Blade Short MG-TPMS

            Achieves long tool life in low-speed domain by adopting the high toughness cemented carbide
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 32 ～ 12Tapered squareCopper[○]8 ～ 30-44 ～ 1245 ～ 90
            Ordinarie pris (exklusive MOMS):
            81.57 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide End Mill (Trapezoid Runner) MG-TRC
            • Volume Discount

            OSG

            Carbide End Mill (Trapezoid Runner) MG-TRC

            Tapered Blade End Mill For Trapezoidal Runner Machining Uses high toughness, super hard alloys.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            7 ～ 152 ～ 6Tapered squareCopper[○]4 ～ 12-24 ～ 1245 ～ 75
            Ordinarie pris (exklusive MOMS):
            84.50 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • For Rib Grooves, Taper Ball End Shape, FXS-RB-TPB
            • Volume Discount

            OSG

            For Rib Grooves, Taper Ball End Shape, FXS-RB-TPB

            High rigidity taper end mill enables high efficiency machining of rib grooves. Free-form curved surface machining is also possible.
            Mer information
            Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
            0.5 ～ 2-Taper ballCopper[○]4 ～ 250.3 ～ 1.25multi-edged3 ～ 635 ～ 60
            Ordinarie pris (exklusive MOMS):
            94.82 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • For Rib Grooves, with Corner R, Taper Shape, FXS-RB-TPCR

              OSG

              For Rib Grooves, with Corner R, Taper Shape, FXS-RB-TPCR

              Radius end type of high rigidity taper end mill enables high efficiency machining of rib grooves.
              Mer information
              Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
              0.5 ～ 1.51 ～ 1.5Tapered radiusCopper[○]8 ～ 120.2multi-edged445
              Ordinarie pris (exklusive MOMS):
              84.35 €～
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • C-CTE2000 UT Coated 2-Flute Tapered

                UNION TOOL

                C-CTE2000 UT Coated 2-Flute Tapered

                [Features]· 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°
                Mer information
                Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                0.5 ～ 150.2 ～ 2.5Tapered squareCopper[○]0.8 ～ 8-23 ～ 838 ～ 50
                Ordinarie pris (exklusive MOMS):
                109.14 €～
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • C-CTE4000 UT Coated 4-Flute Tapered

                  UNION TOOL

                  C-CTE4000 UT Coated 4-Flute Tapered

                  [Features]· Taper end mill with extensive variations from taper half angle of 30' to 7°
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 73 ～ 10Tapered squareCopper[○]10 ～ 35-46 ～ 1650 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  111.36 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Tapered Long Blade End Mill NTEL-2
                  • Volume Discount

                  NS TOOL

                  Tapered Long Blade End Mill NTEL-2

                  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; Copper, aluminium alloy.
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 201 ～ 3Tapered squareCopper[◎]10 ～ 20-24 ～ 1645 ～ 100
                  Ordinarie pris (exklusive MOMS):
                  119.36 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • MTB230 MUGEN-COATING Tapered Ball End Mill
                  • KAMPANJFÖRSÄLJNING
                  • Volume Discount

                  NS TOOL

                  MTB230 MUGEN-COATING Tapered Ball End Mill

                  Capable of simultaneous taper machining and ball machining
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1 ～ 15-Taper ballCopper[◎]1 ～ 160.1 ～ 224 ～ 1050 ～ 70
                  Ordinarie pris (exklusive MOMS):
                  114.04 €～
                  Ordinarie pris (exklusive MOMS):
                  Specialpris
                  Ordinarie avsändningsdatum:
                  Lagervara: 1 arbetsdag
                  Vissa artiklar kan skickas samma dag
                  Konfigurera
                • Carbide Tapered End Mill NTE-4
                  • Volume Discount

                  NS TOOL

                  Carbide Tapered End Mill NTE-4

                  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 153 ～ 10Tapered squareCopper[◎]10 ～ 35-46 ～ 1650 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  105.04 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • X Coated Taper End Mill NTE-2X
                  • Volume Discount

                  NS TOOL

                  X Coated Taper End Mill NTE-2X

                  [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 50.5 ～ 2.5Tapered squareCopper[○]2 ～ 4-23 ～ 435 ～ 45
                  Ordinarie pris (exklusive MOMS):
                  112.68 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • X Coated Taper End Mill NTE-4X
                  • Volume Discount

                  NS TOOL

                  X Coated Taper End Mill NTE-4X

                  [Material] ○: Stainless steel, aluminium alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat treated steel.
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 53 ～ 10Tapered squareCopper[○]10 ～ 35-46 ～ 1650 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  114.58 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Tapered Long Blade End Mill NTEL-4
                  • Volume Discount

                  NS TOOL

                  Tapered Long Blade End Mill NTEL-4

                  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, copper.
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 53 ～ 6Tapered squareCopper[◎]20 ～ 35-46 ～ 1260 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  128.03 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Tapered Medium Blade End Mill NTEM-2
                  • Volume Discount

                  NS TOOL

                  Tapered Medium Blade End Mill NTEM-2

                  [Material] ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminium alloy, Copper
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 201 ～ 4Tapered squareCopper[◎]5 ～ 20-24 ～ 1650 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  100.28 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345
                  • Volume Discount

                  NS TOOL

                  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

                  The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 2-Taper ballCopper[○]0.75 ～ 4.50.5 ～ 23660 ～ 110
                  Ordinarie pris (exklusive MOMS):
                  77.39 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L
                  • Volume Discount

                  NS TOOL

                  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

                  The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 5-Taper ballCopper[◎]0.2 ～ 100.1 ～ 524 ～ 1250 ～ 140
                  Ordinarie pris (exklusive MOMS):
                  110.77 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Taper End Mill for Copper Electrode / Aluminum / Plastic DTE
                  • Volume Discount

                  NS TOOL

                  Taper End Mill for Copper Electrode / Aluminum / Plastic DTE

                  Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 51 ～ 10Tapered squareCopper[◎]4 ～ 35-24 ～ 1645 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  88.83 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Air Wheel Solid Taper End Mill
                  • Volume Discount

                  EIKOSHA

                  Carbide Air Wheel Solid Taper End Mill

                  Graphite Electrode Processing With Air Hole
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5 ～ 74 ～ 12Tapered squareCopper[◎]25 ～ 50-26 ～ 2090 ～ 120
                  Ordinarie pris (exklusive MOMS):
                  164.02 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Solid Taper Ball End Mill
                  • Volume Discount

                  EIKOSHA

                  Carbide Solid Taper Ball End Mill

                  Equal Twist
                  Mer information
                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1ﾟ ～ 30'-Taper ballCopper[◎]4 ～ 400.5 ～ 824 ～ 2545 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  103.46 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Air Hole Solid Taper Ball End Mill AHTBE
                  • Volume Discount

                  EIKOSHA

                  Carbide Air Hole Solid Taper Ball End Mill AHTBE

                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  0.5ﾟ ～ 30'-Taper ballCopper[◎]25 ～ 502 ～ 626 ～ 2090 ～ 120
                  Ordinarie pris (exklusive MOMS):
                  177.11 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Graphite Solid Tapered End Mill GTE
                  • Volume Discount

                  EIKOSHA

                  Carbide Graphite Solid Tapered End Mill GTE

                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1ﾟ ～ 30'4 ～ 12Tapered squareCopper[◎]25 ～ 50-26 ～ 2090 ～ 120
                  Ordinarie pris (exklusive MOMS):
                  145.85 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Graphite Solid Tapered Ball End Mill GTBE
                  • Volume Discount

                  EIKOSHA

                  Carbide Graphite Solid Tapered Ball End Mill GTBE

                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1ﾟ ～ 30'-Taper ballCopper[◎]25 ～ 502R ～ 6R26 ～ 2090 ～ 120
                  Ordinarie pris (exklusive MOMS):
                  154.69 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Solid Tapered End Mill CSTE
                  • Volume Discount

                  EIKOSHA

                  Carbide Solid Tapered End Mill CSTE

                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1ﾟ ～ 30'0.5 ～ 16Tapered squareCopper[◎]2 ～ 65-23 ～ 3235 ～ 140
                  Ordinarie pris (exklusive MOMS):
                  100.40 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Solid Tapered End Mill (Long) CSTEL
                  • Volume Discount

                  EIKOSHA

                  Carbide Solid Tapered End Mill (Long) CSTEL

                  Single corner (θ)(Degree)Tip diameter (D)(φ)Typework materialBlade length (l)(mm)R Size(mm)Number of flutes(sheet)Shank diameter (d)(mm)Overall Length (L)(mm)
                  1ﾟ ～ 30'1 ～ 6Tapered squareCopper[◎]10 ～ 35-24 ～ 1250 ～ 90
                  Ordinarie pris (exklusive MOMS):
                  102.21 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
              • 1
              • 2
              • Nästa

                • Kategorier som hör till Carbide Taper End Mills