Inserts (for Milling)（work material：Cast Iron Page 6）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 41.67 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Tips for Phoenix Front Milling Octagon Type Bore Type
OSG
It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.Configure nowStarting from∗ ： 28.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Ball End Mills for Finishing
OSG
The high mounting accuracy of the body allows for a good machined surface and long tool life. Can be selected according to the application.- Volume Discount
Configure nowStarting from∗ ： 45.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Radius End Mills for Finishing
OSG
It is an insert with high corner radius accuracy, fully profiled bottom edge and special treatment to improve cutting edge strength. Good machining accuracy can be achieved.- Volume Discount
Configure nowStarting from∗ ： 35.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Round Cutters
OSG
An insert for OSG-PHENIX PCR. Can be adjusted according to the notch of the inserts.- Volume Discount
Configure nowStarting from∗ ： 12.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series PHP Drills
OSG
An insert drill with a unique tip shape that supports a variety of machining operations.- Volume Discount
Configure nowStarting from∗ ： 13.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series 4-Corner Shoulder Cutting Cutters
OSG
A positive square insert with 4 corners. A compact insert suitable for shallow depths of cut.Configure nowStarting from∗ ： 11.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Front Milling Square Type
OSG
The positive chipbreaker achieves high rigidity and reduced cutting force. Compatible with a wide range of machining operations from roughing to finishing.- Volume Discount
Configure nowStarting from∗ ： 28.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
PHC Tips for Phoenix Series High Feed Radius Cutters
OSG
Economical due to the use of 4 corners. Crusher shape emphasises sharpness while maintaining cutting rigidity.Configure nowStarting from∗ ： 13.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Front Milling Octagon Type
OSG
It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.Configure nowStarting from∗ ： 29.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Face Milling Cutter 75° (15°) S...ED
SANDVIK
[Features]
An insert for face milling cutters.
For face milling.Configure nowStarting from∗ ： 21.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 87.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 136.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 32.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 88.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 44.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Grooving Insert For CoroMill 327 - Full R
SANDVIK
Wide range of sharp cutting edges for low cutting forces and high quality burr-free grooving, and shank lengths and diameters are availableConfigure nowStarting from∗ ： 90.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 95.61 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 111.90 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 136.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 104.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 87.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Threading Insert for CoroMill 328
SANDVIK
For circlip grooving of holes with larger than 39 mm in diameter
Sharp cutting edge for precision groovesConfigure nowStarting from∗ ： 115.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 30.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 34.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 44.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert For CoroMill 210 - R210-E-M
SANDVIK
[Features]
Insert for CoroMill 210.
Carbide-coated insert.
Can be used for high feed machining.
For milling of high-hardness materials
For high-feed machining
For plungingConfigure nowStarting from∗ ： 25.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grooving Insert For CoroMill 327 - 327R-GMM
SANDVIK
[Features]
Insert for CoroMill 327.
A sharp blade tip for high-precision grooving.
Suitable for all types of work material.
For grooving with a milling cutter.Configure nowStarting from∗ ： 110.21 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 44.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kyocera Milling Tip CA420M CVD Coating
KYOCERA
[Features]
· CA420M: Controls film peeling with the advanced CVD coating "CRIOS" technology, and prevents chipping as well as achieving a long, stable life.
[Applications]
· For Milling
· CA420M: High speed machining of cast ironConfigure nowStarting from∗ ： 23.69 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Kyocera Milling Tip PR1510 PVD Coating
KYOCERA
[Features]
· PR1510: Uses "MEGACOAT NANO", a special nano-laminated coating with superior wear resistance and heat resistance.
· Gray cast iron and ductile cast iron machining achieves superior fracture resistance and wear resistance.
[Applications]
· For Milling
· PR1510: For milling of gray cast iron and ductile cast ironConfigure nowStarting from∗ ： 10.36 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Kyocera Milling Tip PR1510 PVD Coating
KYOCERA
[Features]
· PR1510: Uses "MEGACOAT NANO", a special nano-laminated coating with superior wear resistance and heat resistance.
· Gray cast iron and ductile cast iron machining achieves superior fracture resistance and wear resistance.
[Applications]
· For Milling
· PR1510: For milling of gray cast iron and ductile cast ironConfigure nowStarting from∗ ： 16.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sandvik Coro-Mill 327 Grooved, Full R Tip 1025
SANDVIK
[Features]
· CORO-MILL 327 tip.
· Sharp blade tip for high-precision grooves.
· Supports any kind of workpiece.
[Applications]
· For full radius groove machining with milling cutter.Configure nowStarting from∗ ： 90.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 12.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 16.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】
WIDIA
Chamfer mill, M25 Series, Insert, SDMW [10 Pcs. Included]
[Specifications]
Shape (initial letter of part number): S (square)
Relief angle: D (15°)
Work material: cast Iron / non-ferrous metals / heat resistant alloys, titanium alloys
Number of available corners: 4
Cutting edge length (mm): 9.53
Thickness (mm): 3.18
Grade: THMConfigure nowStarting from∗ ： 16.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 23.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mill TAW13/EAW13 Insert, SWMT-MJ
TUNGALOY
Insert with MJ chip breaker.
[Features]
·Square single-sided specification.
[Applications]
・ General purpose type.Configure nowStarting from∗ ： 14.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mill TAW13/EAW13 Insert, SWMW
TUNGALOY
Flat top type insert.
[Features]
·Cutting edge reinforced type.
·Square single-sided specification.Configure nowStarting from∗ ： 14.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 49.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 49.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 83.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 26.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Shape (initial letter of model number) |
| Clearance angle |
| work material |
| Available corners |
| Data for CAM / Tool Management Software |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | WIDIA | TUNGALOY | TUNGALOY | TUNGALOY | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Insert For CoroMill 490, Ceramic / CBN / Diamond Insert 490R / L..E | Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60° | Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R | Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 41.67 € *Unit price with basic configuration | 28.00 € *Unit price with basic configuration | 45.20 € *Unit price with basic configuration Volume Discount | 35.00 € *Unit price with basic configuration Volume Discount | 12.80 € *Unit price with basic configuration Volume Discount | 13.80 € *Unit price with basic configuration Volume Discount | 11.60 € *Unit price with basic configuration | 28.50 € *Unit price with basic configuration Volume Discount | 13.30 € *Unit price with basic configuration | 29.60 € *Unit price with basic configuration | 21.13 € *Unit price with basic configuration | 87.94 € *Unit price with basic configuration | 136.94 € *Unit price with basic configuration | 32.54 € *Unit price with basic configuration | 88.06 € *Unit price with basic configuration | 44.72 € *Unit price with basic configuration | 90.51 € *Unit price with basic configuration | 95.61 € *Unit price with basic configuration | 111.90 € *Unit price with basic configuration | 136.57 € *Unit price with basic configuration | 104.66 € *Unit price with basic configuration | 87.13 € *Unit price with basic configuration | 115.17 € *Unit price with basic configuration | 30.55 € *Unit price with basic configuration | 34.13 € *Unit price with basic configuration | 44.46 € *Unit price with basic configuration | 25.40 € *Unit price with basic configuration | 110.21 € *Unit price with basic configuration | 44.72 € *Unit price with basic configuration | 23.69 € *Unit price with basic configuration | 10.36 € *Unit price with basic configuration | 16.32 € *Unit price with basic configuration | 90.51 € *Unit price with basic configuration | 12.28 € *Unit price with basic configuration | 16.95 € *Unit price with basic configuration | 16.60 € *Unit price with basic configuration | 23.78 € *Unit price with basic configuration | 14.10 € *Unit price with basic configuration | 14.10 € *Unit price with basic configuration | 49.69 € *Unit price with basic configuration | 49.62 € *Unit price with basic configuration | 83.38 € *Unit price with basic configuration | - | - | 26.15 € *Unit price with basic configuration |
| Min. Shipping Days | 14 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 9 Days | 9 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Shape (initial letter of model number) | T (Equilateral Triangle Type) | O (Regular octagon) | Other | Other | R (Circular) | S (Square) | S (Square) | S (Square) | S (Square) | Other | S (Square) / Other | S (Square) | Other | P (Regular pentagon) | P (Regular pentagon) | S (Square) | Other | Other | Other | Other | Other | T (Equilateral Triangle Type) | T (Equilateral Triangle Type) | S (Square) | S (Square) | S (Square) | S (Square) | Other | S (Square) | - | - | - | Other | W (Hexagonal Type) / Other | - | S (Square) | O (Regular octagon) | S (Square) | S (Square) | - | - | - | - | - | - |
| Clearance angle | N (0°) | Other | - | - | P (11°) | C (7°) | D (15°) | N (0°) | D (15°) / Other | Other | P (11°) / N (0°) | Other | Other | N (0°) | N (0°) | N (0°) | Other | Other | Other | Other | Other | N (0°) | Other | Other | Other | Other | C (7°) | Other | N (0°) | - | - | - | Other | P (11°) | - | D (15°) | N (0°) | Other | Other | Other | Other | N (0°) | N (0°) | - | Other |
| work material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Available corners | 3 | - | - | - | 8 | - | - | - | - | - | 2 / 4 | 4 | 1 | 5 | 5 | 4 | 3 | 3 | 3 / 6 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 6 | 4 | - | - | - | 3 | - | - | 4 | 8 | 4 | 4 | - | - | - | - | - | - |
| Data for CAM / Tool Management Software | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | zoller | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
-
Shape (initial letter of model number)
- O (Regular octagon)
- H (regular hexagon)
- P (Regular pentagon)
- S (Square)
- T (Equilateral Triangle Type)
- C (80° Diamond-Shape)
- E (75°Diamond Shape)
- D (55° Diamond-Shape)
- A (85° parallelogram)
- B (82° Parallelogram)
- L (Rectangular)
- W (Hexagonal Type)
- R (Circular)
- Other
-
Clearance angle
- C (7°)
- P (11°)
- D (15°)
- E (20°)
- F (25°)
- G (30°)
- N (0°)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Available corners
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- Other
-
Data for CAM / Tool Management Software
- zoller
Brand
CAD data type
-
- 2D
- 3D
Categories related to Inserts (for Milling)
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.