Kategori

Se mer

Filtreringsvillkor

Rensa alla

Applicable Tip Shape
Minimum Machining Diameter
- 1
- 3
- 5
- 6
- 7
- 8
- 8.5
- 9
- 10
- 11
- 12
- 13
- 14
- 16
- 17
- 19
- 20
- 20/30
- 22
- 23
- 25
- 25/37
- 26
- 27
- 28
- 32
- 35
- 40
- 40/55
- 41
- 44
- 46
- 50
- 50/75
- 53
- 55
- 60
- 60/75
- 63
- 68
- 69
- 70
- 70/90
- 83
- 85
- 86
- 99
- 100
- 106
- 123
- 136
- 148
Application
- Internal Diameter
- Inner diameter profiling
Cutting Direction
- Right-hand
- Left-hand
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
Overall Length L1
- 15.9
- 24.2
- 25
- 25.5
- 30
- 32
- 32.3
- 34.1
- 35
- 44.3
- 45.3
- 49
- 50
- 51
- 54.4
- 55
- 57.2
- 63
- 63.2
- 68
- 70
- 80
- 98
- 100
- 120
- 125
- 128
- 140
- 143
- 150
- 160
- 180
- 200
- 250
- 270
- 300
- 400
Clearance angle
- 7°
- 0°
- 11°
Shank diameter
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 22
- 25
- 32
- 40
- 50
- 63.5
- 80
Protrusion length (L/D)
- Up to 3
- Up to 4
- ～5.5
- ~7
- 9 to 24
- 11
- 12～32
- 15–40
- 18～48
- 20
- 24
- 24～64
- 30
- 30~80
- 32
- 32.5～64
- 36
- 37.5～100
- 40
- 48
- 49～100
- 60
- 64
- 72
- 80
- 80/160
- 96
- 100
- 120
- 160
Lubrication Hole Y/N
- Available
- N/A
Tillverkare

Holding Tools for I.D. Tuning (Applicable Tip Shape: T (Triangle))

57 poster

* Information om dagar till leverans, fraktkostnader och priser

Lista

Foto

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

Nästa

- Volume Discount
BIG KAISER
Insert Holder For EWN Boring Head Replacement
[Features]Combining the head and insert holder makes it possible to secure a cutting chip pocket. Designed for improved cutting chip discharge. For EWN head
Mer information
Applicable Tip Shape Minimum Machining Diameter Application Cutting Direction Clamp Shape Overall Length L1 Clearance angle Shank diameter Protrusion length (L/D)
T (Triangle) - Internal Diameter - - - - - -
Ordinarie pris (exklusive MOMS):
65.54 €～
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera
BIG KAISER
EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)
[Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.
Mer information
Applicable Tip Shape Minimum Machining Diameter Application Cutting Direction Clamp Shape Overall Length L1 Clearance angle Shank diameter Protrusion length (L/D)
T (Triangle) 32 ～ 85 Internal Diameter - - - - - -
Ordinarie pris (exklusive MOMS):
1,145.00 €～
Ordinarie avsändningsdatum:
10 arbetsdagar
Konfigurera
BIG KAISER
EWN Boring Head Set (For Finishing / Insert Holder Type)
[Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Compatible Tip: TP08, TC11・Lubrication Hole Y/N: Available[Features]・The EWN single cutter boring tool program for fine boring covers a range of Ø 20-203 mm with only 7 fine boring heads・Due to the optimized balance over the whole adjustment range, cutting speeds up to 1200 m/min are permitted
Mer information
Applicable Tip Shape Minimum Machining Diameter Application Cutting Direction Clamp Shape Overall Length L1 Clearance angle Shank diameter Protrusion length (L/D)
T (Triangle) 20 ～ 100 Internal Diameter - - - - - -
Ordinarie pris (exklusive MOMS):
684.14 €～
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	-	Internal Diameter	-	-	-	-	-	-

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-

SANDVIK

CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-

Ordinarie pris (exklusive MOMS):

1,352.63 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

BIG KAISER
EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)
[Features]· The internal weight can be adjusted manually by turning the balance ring.· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).
Mer information
Applicable Tip Shape Minimum Machining Diameter Application Cutting Direction Clamp Shape Overall Length L1 Clearance angle Shank diameter Protrusion length (L/D)
T (Triangle) 1 Internal Diameter - - - - 50 ～ 63.5 -
Ordinarie pris (exklusive MOMS):
1,575.00 €～
Ordinarie avsändningsdatum:
10 arbetsdagar
Konfigurera

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	1	Internal Diameter	-	-	-	-	50 ～ 63.5	-

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STFCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 55	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	25 ～ 63	-	-	-

Ordinarie pris (exklusive MOMS):

242.84 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge T-Max P Lever Clamp For Negative Inserts PTFNR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	55 ～ 70	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK
Fine Boring Head, Coromant Capto / HSK
Applicable Tip Shape Minimum Machining Diameter Application Cutting Direction Clamp Shape Overall Length L1 Clearance angle Shank diameter Protrusion length (L/D)
T (Triangle) 3 Internal Diameter - - - - 12 ～ 20 -
Ordinarie pris (exklusive MOMS):
1,241.81 €～
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	3	Internal Diameter	-	-	-	-	12 ～ 20	-

SANDVIK

Boring Bar For Fine Boring Head, R429.90 / R249U

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	3 ～ 26	Internal Diameter	Right-hand	Pin Lock	-	-	12 ～ 20	-

Ordinarie pris (exklusive MOMS):

244.42 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

MANYO TOOLS

TBS Throw-Away Square Bit

[Features]· Use inserts from cutting tool manufacturers

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	-	Internal Diameter	-	Screw-on	80 ～ 150	-	-	-

Ordinarie pris (exklusive MOMS):

127.95 €～

Ordinarie avsändningsdatum:

10 arbetsdagar

Konfigurera

KYOCERA

A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangular); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	22	Internal Diameter	Right-hand	Screw-on	200	-	20	～5.5

Ordinarie pris (exklusive MOMS):

119.95 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S-STLC-A Type Steel Bar (Inner Diameter, Inner End Surface Machining)

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	10 ～ 14	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 150	-	8 ～ 12	Up to 4

Ordinarie pris (exklusive MOMS):

95.09 €～

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

A / S-STLB (P)-AE Type A / S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	8	Internal Diameter	Right-hand	Screw-on	100	11°	6	Up to 4

Ordinarie pris (exklusive MOMS):

128.97 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

KYOCERA

S-STLB (P)-A Type Steel Bar (Inner Diameter, Inner End Surface Machining) Steel Bar (Inner Diameter, Inner End Surface Machining)

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	10	Internal Diameter	Right-hand	Screw-on	120	11°	8	Up to 4

Ordinarie pris (exklusive MOMS):

97.42 €

Ordinarie avsändningsdatum:

7 arbetsdagar

Konfigurera

KYOCERA

E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	27	Internal Diameter	Left-hand	Screw-on	300	11°	25	~7

Ordinarie pris (exklusive MOMS):

792.85 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S...STWP-E Type Excellent Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: T (triangle); compatible clearance angle: positive 11° (P); clamping method: screw on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	32	Inner diameter profiling	Right-hand	Screw-on	270	-	25	Up to 3

Ordinarie pris (exklusive MOMS):

114.94 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

C...STXP (B) Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining)

[Features] Machining applications: Inside diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamping method: screw on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	9	Internal Diameter	Right-hand	Screw-on	143	-	8	~7

Ordinarie pris (exklusive MOMS):

213.19 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

KYOCERA

S...CTUP Type (Inner Diameter Machining)

[Features] Machining applications: Inner diameter, through hole; compatible insert shape: T (triangular); compatible insert clearance angle: positive 11° (P; clamping method: clamp on (C).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	16 ～ 27	Internal Diameter	Right-hand / Left-hand	Clamp-on	140 ～ 180	-	12 ～ 20	Up to 3

Ordinarie pris (exklusive MOMS):

92.25 €～

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S...PTUN-○○ Type (Inner Diameter Machining)

[Features] -Lever lock[Features] -For boring bars, inner diameter machining.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	25	Internal Diameter	Left-hand	Lever lock	180	-	20	Up to 3

Ordinarie pris (exklusive MOMS):

146.50 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

Lever lock type boring bar.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	32	Internal Diameter	Right-hand	Lever lock	200	-	25	Up to 3

Ordinarie pris (exklusive MOMS):

199.52 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

SANDVIK

CORO-TURN 107 Carbide Boring Bit for Positive Tips

Unique shape exhibits high performance

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 to 24 ～ 80

Ordinarie pris (exklusive MOMS):

198.02 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	11	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	100	7°	8	9 to 24

Ordinarie pris (exklusive MOMS):

198.00 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn 107, Boring Tool Bit for Turning

[Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling·High tool rigidity ensures stable machining operations even with workpieces with long protrusions[Applications]·For inner diameter turning operations

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	11	Internal Diameter	Left-hand	Screw-on	125	7°	10	15–40

Ordinarie pris (exklusive MOMS):

198.00 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn 111, Boring Tool Bit for Turning

[Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions·Easy-fix sleeve for quick and accurate core height adjustment[Applications]·For inner diameter turning operations

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	10 ～ 32	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	125 ～ 300	11°	8 ～ 25	12～32 ～ 37.5～100

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	8.5 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 200	11°	6 ～ 16	9 to 24 ～ 32

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R

[Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	13 ～ 16	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	100 ～ 120

Ordinarie pris (exklusive MOMS):

842.30 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STGCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20/30 ～ 60/75	Internal Diameter	Right-hand / Left-hand	Screw-on	25 ～ 63	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STWCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	24.2 ～ 54.4	-	-	-

Ordinarie pris (exklusive MOMS):

245.86 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STTCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 60	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	25 ～ 63	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STSCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	25.5 ～ 57.2	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit T-Max P Lever Clamp S...PTFNR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 300	-	16 ～ 25	64 ～ 100

Ordinarie pris (exklusive MOMS):

369.99 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit T-Max P Lever Clamp S...PTFNR / L-W

[Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	50	Internal Diameter	Left-hand	Lever lock	400	-	40	160

Ordinarie pris (exklusive MOMS):

504.42 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64

Ordinarie pris (exklusive MOMS):

317.92 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR / L

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	13 ～ 16	Internal Diameter	Left-hand	Screw-on	150 ～ 180	7°	10 ～ 12	100 ～ 120

Ordinarie pris (exklusive MOMS):

841.09 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL

[Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

Mer information