Holding Tools for I.D. Tuning (Lubrication Hole Y/N: Available)

• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Round Bit Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Minimum Machining Diameter: 1・L(mm): 28.5, 36, 45・Lubrication Hole Y/N: Available[Features]・Fine boring head in integral, modular, and screw-on execution for the precise machining of bores

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	1	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  440.00 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  SW Boring Head (Rough Highly Rigid Type)

  [Features] They can be used for BBT/BT shafts with double contact. [Features] They are a high rigidity type for roughing and can also be used for machining flat bearing surfaces.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	20 ～ 148	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  327.00 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,145.00 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Compatible Tip: TP08, TC11・Lubrication Hole Y/N: Available[Features]・The EWN single cutter boring tool program for fine boring covers a range of Ø 20-203 mm with only 7 fine boring heads・Due to the optimized balance over the whole adjustment range, cutting speeds up to 1200 m/min are permitted

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  684.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,352.63 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L

  CoroTurn 111 carbide boring tool bit for inner diameter machining with long runout and unstable machining conditions

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	10 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 180	11°	8 ～ 12	48 ～ 72

  Ordinarie pris (exklusive MOMS):

  362.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)

  [Features]· The internal weight can be adjusted manually by turning the balance ring.· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	1	Internal Diameter	-	-	-	-	50 ～ 63.5	-

  Ordinarie pris (exklusive MOMS):

  1,575.00 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

  First recommendation for general turning for medium to large partsInserts with crushers and materials for all machining areas.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	0°	16 ～ 50	64 ～ 200

  Ordinarie pris (exklusive MOMS):

  354.09 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, 570-Type Cutting Head

  CoroTurnSL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of parts

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	40 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  435.21 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cutting Head for CORO-TURN SL CORO-TURN 107

  For turning slim parts with inner and outer diametersThe plate change with high repeatability improves productivity and achieves high quality.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	16 ～ 25	20

  Ordinarie pris (exklusive MOMS):

  348.52 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	-	-	34 ～ 45

  Ordinarie pris (exklusive MOMS):

  550.43 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PCLN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	34 ～ 56	Internal Diameter	Right-hand / Left-hand	Lever lock	28 ～ 42	-	25 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  523.29 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  383.32 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL - Coromant Capto Adapter, Cx-570-R / LG-045

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  729.67 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning DCLN / DDUN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand / Left-hand	Cable clamp	-	0°	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PWLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  753.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Fine Boring Head, Coromant Capto / HSK

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	3	Internal Diameter	-	-	-	-	12 ～ 16	-

  Ordinarie pris (exklusive MOMS):

  1,241.81 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Bar For Fine Boring Head, R429.90 / R249U

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	3 ～ 26	Internal Diameter	Right-hand	Pin Lock	-	-	12 ～ 20	-

  Ordinarie pris (exklusive MOMS):

  244.42 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ISCAR

  Cut Grip Inner Diameter Grooving Holder

  [Features] Multi-function tool.Double clamp.GEHIMR/L (without support).[Features] For grooving internal diameters. , etc.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  Other	12.5 ～ 16	Internal Diameter	Right-hand / Left-hand	Cable clamp	125 ～ 160	-	10 ～ 16	2.5

  Ordinarie pris (exklusive MOMS):

  343.72 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  ISCAR

  Cam Groove (Multipurpose Boring Bar) MG

  [Features] The holder is an ordinary boring bar for right and left hand use.[Features] It can be used for piercing with rotary tools such as MC.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  Other	8 ～ 11	Internal Diameter	-	Screw-on	92	-	12	1.5 ～ 2.3

  Ordinarie pris (exklusive MOMS):

  261.02 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ISCAR

  Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)

  [Features] A holder for machining inner diameters with a minimum machining diameter of 20.5 to 57 mm and a projection length of 5.5 to 17.5 mm.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  Other	20.5 ～ 57	Internal Diameter	Right-hand / Left-hand	Cable clamp	150 ～ 300	-	16 ～ 40	5.5 ～ 17.5

  Ordinarie pris (exklusive MOMS):

  288.03 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	14 ～ 18	Internal Diameter	Right-hand	Screw-on	150 ～ 180	11°	12 ～ 16	～5.5

  Ordinarie pris (exklusive MOMS):

  162.62 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter / Inner Face Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	14	Internal Diameter	Left-hand	Screw-on	180	11°	12	~7

  Ordinarie pris (exklusive MOMS):

  228.90 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDUC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	20 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  146.50 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDUC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand	Screw-on	165 ～ 300	7°	20 ～ 25	~7

  Ordinarie pris (exklusive MOMS):

  530.94 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDQC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	30	Inner diameter profiling	Left-hand	Screw-on	250	-	25	～5.5

  Ordinarie pris (exklusive MOMS):

  156.88 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDQC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	160	-	10	~7

  Ordinarie pris (exklusive MOMS):

  237.29 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDZC-AE Excellent Bar (Boring)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	23 ～ 32	Pull	Right-hand / Left-hand	Screw-on	180 ～ 250	7°	16 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  130.64 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDZC-A Carbide Anti-Vibration Bar (for Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27	Pull	Right-hand	Screw-on	250	7°	20	~7

  Ordinarie pris (exklusive MOMS):

  554.75 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangular); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	22	Internal Diameter	Right-hand	Screw-on	200	-	20	～5.5

  Ordinarie pris (exklusive MOMS):

  119.95 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	27	Internal Diameter	Left-hand	Screw-on	300	11°	25	~7

  Ordinarie pris (exklusive MOMS):

  792.85 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SVUC (B)-AE Type Excellent Bar (Undercutting)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	40	Inner diameter profiling	Left-hand	Screw-on	250	5°	32	～5.5

  Ordinarie pris (exklusive MOMS):

  219.75 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SVZC (B)-AE Type Excellent Bar (Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	34	Pull	Right-hand	Screw-on	250	5°	25	～5.5

  Ordinarie pris (exklusive MOMS):

  170.76 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S / A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)

  [Features] Machining applications: Inside diameter, through hole; compatible insert shape: W (hexagonal); compatible insert clearance angle: positive 5° (B), positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	10	Internal Diameter	Right-hand	Screw-on	120	5°	8	～5.5

  Ordinarie pris (exklusive MOMS):

  96.75 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A...PCLN09 Type (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole) Twin Hole Bar

  Lever lock type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	27	Internal Diameter	Right-hand	Lever lock	180	-	20	Up to 3

  Ordinarie pris (exklusive MOMS):

  173.29 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

  Lever lock type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32	Internal Diameter	Right-hand	Lever lock	200	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  199.52 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PWLN06 Type (Inner Diameter / Inner End Face Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamping method: pin lock (P).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32	Internal Diameter	Left-hand	Lever lock	200	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  168.91 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Boring Bit for Positive Tips

  For turning inside and outside diameter slim partsExchanging inserts with high repeatability improves productivity and achieves high quality

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20	Internal Diameter	Left-hand	Screw-on	200	7°	16	24～64

  Ordinarie pris (exklusive MOMS):

  198.00 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 to 24 ～ 80

  Ordinarie pris (exklusive MOMS):

  198.02 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN RC, Boring Bit for Negative Tips

  T-Max P series boring bars for outside diameter turning of large to medium sized parts with high productivity.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	32	Internal Diameter	Right-hand	Cable clamp	300	0°	25	37.5～100

  Ordinarie pris (exklusive MOMS):

  431.43 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, 570 Cutting Head

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	40 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	32 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  418.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cutting Head for CORO-TURN SL CORO-TURN RC

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	57	Internal Diameter	Left-hand	Cable clamp	42	-	40	-

  Ordinarie pris (exklusive MOMS):

  454.77 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, Shank Adapter

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	113.65 ～ 154	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  233.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera