Holding Tools for I.D. Tuning (3 sida)

• 

  KYOCERA

  S-SCLP-A Type Steel Bar (Inner Diameter, Inner End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	27	Internal Diameter	Left-hand	Screw-on	250	11°	25	Up to 4

  Ordinarie pris (exklusive MOMS):

  169.96 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter / Inner Face Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	14	Internal Diameter	Left-hand	Screw-on	180	11°	12	~7

  Ordinarie pris (exklusive MOMS):

  228.90 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDUC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	20 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  146.50 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDUC-A Type Steel Bar (Profile Machining)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32	Inner diameter profiling	Right-hand	Screw-on	250	7°	25	Up to 4

  Ordinarie pris (exklusive MOMS):

  187.58 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDUC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32	Inner diameter profiling	Right-hand	Screw-on	300	7°	25	~7

  Ordinarie pris (exklusive MOMS):

  792.85 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDQC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	30	Inner diameter profiling	Left-hand	Screw-on	250	-	25	～5.5

  Ordinarie pris (exklusive MOMS):

  156.88 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDQC-A Type Steel Bar (Profile Machining)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	140	-	10	Up to 4

  Ordinarie pris (exklusive MOMS):

  86.50 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDQC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	160	-	10	~7

  Ordinarie pris (exklusive MOMS):

  237.29 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDZC-AE Excellent Bar (Boring)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	23 ～ 32	Pull	Right-hand / Left-hand	Screw-on	180 ～ 250	7°	16 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  130.64 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDZC-A Type Steel Bar (Draw Machining)

  [Features] Machining applications: Inside diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	14 ～ 27	Pull	Right-hand / Left-hand	Screw-on	140 ～ 200	7°	10 ～ 20	Up to 4

  Ordinarie pris (exklusive MOMS):

  86.78 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDZC-A Carbide Anti-Vibration Bar (for Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27	Pull	Right-hand	Screw-on	250	7°	20	~7

  Ordinarie pris (exklusive MOMS):

  554.75 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangular); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	22	Internal Diameter	Right-hand	Screw-on	200	-	20	～5.5

  Ordinarie pris (exklusive MOMS):

  119.95 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-STLC-A Type Steel Bar (Inner Diameter, Inner End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	10 ～ 14	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 150	-	8 ～ 12	Up to 4

  Ordinarie pris (exklusive MOMS):

  95.09 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A / S-STLB (P)-AE Type A / S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8	Internal Diameter	Right-hand	Screw-on	100	11°	6	Up to 4

  Ordinarie pris (exklusive MOMS):

  128.97 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-STLB (P)-A Type Steel Bar (Inner Diameter, Inner End Surface Machining) Steel Bar (Inner Diameter, Inner End Surface Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	10	Internal Diameter	Right-hand	Screw-on	120	11°	8	Up to 4

  Ordinarie pris (exklusive MOMS):

  97.42 €

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	27	Internal Diameter	Left-hand	Screw-on	300	11°	25	~7

  Ordinarie pris (exklusive MOMS):

  792.85 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...STWP-E Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: T (triangle); compatible clearance angle: positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32	Inner diameter profiling	Right-hand	Screw-on	270	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  114.94 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  C...STXP (B) Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining)

  [Features] Machining applications: Inside diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	9	Internal Diameter	Right-hand	Screw-on	143	-	8	~7

  Ordinarie pris (exklusive MOMS):

  213.19 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert clearance angle: positive 7° (C), positive 11° (P); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	20	Internal Diameter	Left-hand	Screw-on	180	5°	16	Up to 4

  Ordinarie pris (exklusive MOMS):

  91.14 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SVPC (B)-A Type Steel Bar (Undercutting and Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	18 ～ 31	Inner diameter profiling	Left-hand	Screw-on	150 ～ 250	5°	12 ～ 25	Up to 4

  Ordinarie pris (exklusive MOMS):

  116.55 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SVUC (B)-AE Type Excellent Bar (Undercutting)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	40	Inner diameter profiling	Left-hand	Screw-on	250	5°	32	～5.5

  Ordinarie pris (exklusive MOMS):

  219.75 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SVUC (B)-A Type Steel Bar (Undercutting)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	16	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150	5°	12	Up to 4

  Ordinarie pris (exklusive MOMS):

  110.31 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SVZC (B)-AE Type Excellent Bar (Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	34	Pull	Right-hand	Screw-on	250	5°	25	～5.5

  Ordinarie pris (exklusive MOMS):

  170.76 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SVZC (B)-A Type Steel Bar (Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	16 ～ 25	Pull	Right-hand / Left-hand	Screw-on	150 ～ 200	5° / 7°	12 ～ 20	Up to 4

  Ordinarie pris (exklusive MOMS):

  88.78 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S / A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)

  [Features] Machining applications: Inside diameter, through hole; compatible insert shape: W (hexagonal); compatible insert clearance angle: positive 5° (B), positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	8 ～ 10	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 120	5°	8 ～ 10	～5.5

  Ordinarie pris (exklusive MOMS):

  96.75 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)

  [Features] Machining applications: Inside diameter, through hole; compatible insert shape: W (hexagonal); compatible insert clearance angle: positive 5° (B), positive 11° (P); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	18	Internal Diameter	Left-hand	Screw-on	180	11°	16	Up to 4

  Ordinarie pris (exklusive MOMS):

  136.91 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...CSKP Type (Inner Diameter Machining)

  Screw clamping type/clamp-on type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	34	Internal Diameter	Right-hand	Clamp-on	220	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  92.82 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...CTUP Type (Inner Diameter Machining)

  [Features] Machining applications: Inner diameter, through hole; compatible insert shape: T (triangular); compatible insert clearance angle: positive 11° (P; clamping method: clamp on (C).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	16 ～ 27	Internal Diameter	Right-hand / Left-hand	Clamp-on	140 ～ 180	-	12 ～ 20	Up to 3

  Ordinarie pris (exklusive MOMS):

  92.25 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PCLN-○○ Type (Inner Diameter / Inner End Face Machining)

  [Features] Lever lock[Features] -For boring bars, inside diameter, deep flange machining.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3

  Ordinarie pris (exklusive MOMS):

  115.89 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A...PCLN09 Type (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole) Twin Hole Bar

  Lever lock type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	27	Internal Diameter	Right-hand	Lever lock	180	-	20	Up to 3

  Ordinarie pris (exklusive MOMS):

  173.29 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PDUN11 Type (Profiling)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamping method: pin lock (P).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 40	Inner diameter profiling	Right-hand	Lever lock	180 ～ 250	-	20 ～ 32	Up to 3

  Ordinarie pris (exklusive MOMS):

  140.38 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PTUN-○○ Type (Inner Diameter Machining)

  [Features] -Lever lock[Features] -For boring bars, inner diameter machining.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	25	Internal Diameter	Left-hand	Lever lock	180	-	20	Up to 3

  Ordinarie pris (exklusive MOMS):

  146.50 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

  Lever lock type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32	Internal Diameter	Right-hand	Lever lock	200	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  199.52 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PWLN06 Type (Inner Diameter / Inner End Face Machining)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamping method: pin lock (P).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32	Internal Diameter	Left-hand	Lever lock	200	-	25	Up to 3

  Ordinarie pris (exklusive MOMS):

  168.91 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PWLN08 Type (Inner Diameter / Inner End Face Machining)

  Lever lock type / wedge lock type boring bar.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	50	Internal Diameter	Right-hand / Left-hand	Lever lock	300	-	40	Up to 3

  Ordinarie pris (exklusive MOMS):

  228.49 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...WWLN08 Type Excellent Bar (Profiling)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert clearance angle: negative 0 (N); clamping method: non-ISO standard.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	28 ～ 40	Internal Diameter	Right-hand	Wedge Lock	250	-	25 ～ 32	Up to 5

  Ordinarie pris (exklusive MOMS):

  225.24 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Boring Bar Sleeve

  [Features] Machining applications: Inner diameter, through hole; compatible application: non-ISO standard; clamping method: non-ISO standard

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	-	-	70	-	-	-

  Ordinarie pris (exklusive MOMS):

  267.01 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge for T-Max P Negative Tip

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	58 ～ 73.7	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Boring Bit for Positive Tips

  For turning inside and outside diameter slim partsExchanging inserts with high repeatability improves productivity and achieves high quality

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20	Internal Diameter	Left-hand	Screw-on	200	7°	16	24～64

  Ordinarie pris (exklusive MOMS):

  198.00 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 to 24 ～ 80

  Ordinarie pris (exklusive MOMS):

  198.02 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Carbide Vibration-Proof Boring Bit for Positive Tips

  For turning slim parts with inner and outer diametersInsertion exchange with high repeatability improves productivity and achieves high quality

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	18	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	7°	12	120

  Ordinarie pris (exklusive MOMS):

  841.09 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN RC, Boring Bit for Negative Tips

  T-Max P series boring bars for outside diameter turning of large to medium sized parts with high productivity.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	32	Internal Diameter	Right-hand	Cable clamp	300	0°	25	37.5～100

  Ordinarie pris (exklusive MOMS):

  431.43 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, 570 Cutting Head

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	40 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	32 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  418.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cutting Head for CORO-TURN SL CORO-TURN RC

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	57	Internal Diameter	Left-hand	Cable clamp	42	-	40	-

  Ordinarie pris (exklusive MOMS):

  454.77 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, Shank Adapter

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	113.65 ～ 154	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  233.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera