Holding Tools for I.D. Tuning (5 sida)

• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64

  Ordinarie pris (exklusive MOMS):

  317.92 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR / L

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	13 ～ 16	Internal Diameter	Left-hand	Screw-on	150 ～ 180	7°	10 ～ 12	100 ～ 120

  Ordinarie pris (exklusive MOMS):

  841.09 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Shank Adapter 570-NG

  [Features]An interchangeable-head-type turning bit. Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit. For outer diameter turning of all types of work material.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand	-	103 ～ 152	-	25 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  233.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Turning CXS-..T090

  [Features]CoroTurn XS Insert BarSolid-carbide coatingBoring bit for small-diameter machiningFor turning

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	5.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	32.25 ～ 42.25	-	5	-

  Ordinarie pris (exklusive MOMS):

  53.87 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Turning CXS-..T045

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	5.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	37.25 ～ 62.25	-	5 ～ 7	-

  Ordinarie pris (exklusive MOMS):

  56.57 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Turning With Chip Breaker CXS-..T098

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	5.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand	-	32.25 ～ 62.25	-	5 ～ 7	-

  Ordinarie pris (exklusive MOMS):

  58.03 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor profiling

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	4.2 ～ 6.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	37.26 ～ 52.25	-	4 ～ 6	-

  Ordinarie pris (exklusive MOMS):

  59.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Back Boring B090

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	1.95 ～ 7.2	Internal Diameter / Inner diameter profiling / Pull	Right-hand	-	52.25	-	5 ～ 7	-

  Ordinarie pris (exklusive MOMS):

  74.48 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Profiling CXS-..R

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingFull RR: 2.0 mm

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	4.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	32.3 ～ 52.7	-	4 ～ 7	-

  Ordinarie pris (exklusive MOMS):

  69.36 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Inner Diameter Chamfering CXS-..GX

  For inner diameter precision machining of small accessories The positioning pin allows precise positioning of carbide boring tool bits in the adapter

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	5.2	Internal Diameter	Right-hand / Left-hand	-	3 ～ 37.3	-	5	-

  Ordinarie pris (exklusive MOMS):

  64.92 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	40 ～ 50	Internal Diameter	Left-hand	Screw-on	-	-	32 ～ 40	32

  Ordinarie pris (exklusive MOMS):

  437.82 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	32 ～ 37	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	15 ～ 20	-	20 ～ 25	20

  Ordinarie pris (exklusive MOMS):

  401.49 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Rough Boring Tool - Step Adjusted

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	150	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  310.65 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Boring Tool Bit For Turning, CCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	-	Internal Diameter	Right-hand	Clamp-on	200 ～ 300	-	-	80 ～ 100

  Ordinarie pris (exklusive MOMS):

  590.40 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max S Boring Tool Bit For Turning, CTFPR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	-	Internal Diameter	Right-hand	Clamp-on	400	-	40	80/160

  Ordinarie pris (exklusive MOMS):

  441.44 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max S Boring Tool Bit For Turning S..CTFPR / L

  A boring tool bit for turning that achieves high productivity, high quality, and high efficiency

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	20 ～ 32	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Clamp-on	200 ～ 300	11°	16 ～ 25	32.5～64 ～ 49～100

  Ordinarie pris (exklusive MOMS):

  199.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max U Fine Boring Unit L / R148C

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	-	Internal Diameter	Right-hand / Left-hand	Pin Lock	44.3 ～ 45.3	-	22	-

  Ordinarie pris (exklusive MOMS):

  964.75 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	300 ～ 350	-	-	36 ～ 40

  Ordinarie pris (exklusive MOMS):

  647.31 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PSKNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	32 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	300 ～ 350	-	-	34 ～ 40

  Ordinarie pris (exklusive MOMS):

  647.31 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PTFNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	28 ～ 32	Internal Diameter	Right-hand	Lever lock	200 ～ 300	-	-	30

  Ordinarie pris (exklusive MOMS):

  550.43 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PWLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32	Internal Diameter	Right-hand / Left-hand	Lever lock	300	-	-	42

  Ordinarie pris (exklusive MOMS):

  647.31 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-MaxR P Cartridge For Turning, PSKN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	-	Internal Diameter	Right-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  355.47 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp PSRNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	60 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	63 ～ 70	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp PSSNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  S (Rectangular)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	55.3 ～ 70.3	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	55 ～ 100	Internal Diameter	Right-hand / Left-hand	Lever lock	63 ～ 100	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PTGNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	50/75 ～ 70/90	Internal Diameter	Right-hand / Left-hand	Lever lock	55 ～ 70	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PTSNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	50 ～ 55	Internal Diameter	Right-hand / Left-hand	Lever lock	57.2 ～ 63.2	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PTTNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	50/75	Internal Diameter	Right-hand / Left-hand	Lever lock	55	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R / L140

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-

  Ordinarie pris (exklusive MOMS):

  191.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L141

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-

  Ordinarie pris (exklusive MOMS):

  191.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L142

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-

  Ordinarie pris (exklusive MOMS):

  183.72 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PDUN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	38 ～ 56	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	32 ～ 36	-	25 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  546.81 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PTFNR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	40 ～ 50	Internal Diameter	Right-hand / Left-hand	Lever lock	35	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  566.17 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head, TR-SL-D13UCR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	40 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	38	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  568.60 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head, TR-SL-D13XCR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	45 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand	Screw-on	22 ～ 27	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  568.60 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head TR-SL-V13LBR / L-HP

  CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	40 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	38 ～ 40	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  566.17 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Shank Adapter, 570-R / LF - J / N

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	134 ～ 135.65	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  247.67 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 392.T-SLxxR / LF

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,055.76 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 392.T-SLxxR / LG

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,055.76 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570-R / L / N

  CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  634.01 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570-R / LF-T

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  572.23 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570-R / LX

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  634.01 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570-R / LX-T

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  571.04 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head TR-SL-D13UCR / L

  [Features]SL couplingExtremely high clamp rigidityThe T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precisionHigh-precision machiningFor profile turning.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	-	7°	40	32

  Ordinarie pris (exklusive MOMS):

  479.94 €

  Ordinarie avsändningsdatum:

  12 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DVUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	52	Internal Diameter	Right-hand / Left-hand	Cable clamp	36	-	40	-

  Ordinarie pris (exklusive MOMS):

  454.77 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera