Grooving / Cutting Off Holders

• 

  SANDVIK

  SANDVIK Driven Tool Holder for BMT-P Turrets

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  4,419.69 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK VDI to Coromant Capto Clamping Unit

  [Specifications]・Type: Clamping unit, Manually operated clamping unit, VDI basic holder・Cutting Direction: Right-hand, Left-hand, No-hand・eClass-5.1: 21021103Quick change clamping units will optimize the machine utilization by reducing both set-up time and tool change time significantly

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand / No-hand	-	30 ～ 60

  Ordinarie pris (exklusive MOMS):

  966.08 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Hydraulic Clamping Unit

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  3,798.54 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to ER Collet Chuck

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  491.08 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Manual Clamping Unit

  [Specifications]・Type: Clamping unit, Manually operated clamping unit・Cutting Direction: Right-hand, Left-hand・eClass-5.1: 21021103, 21021105[Features]・High torque transmission・High bending strength・Quick change and automated tool change・Advanced nozzle technology for process security even at low pressures・Through-tool delivery of high-pressure coolant, from machine to cutting edge・Balanced and concentric・Self-centering

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	80 ～ 208

  Ordinarie pris (exklusive MOMS):

  1,848.85 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Driven Tool Holder for Mazak Machines

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  4,641.85 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Driven Tool Holder for Gildemeister Machines

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  7,220.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  [Features] Machining applications: Grooving; Holder angle (°): 90; Lubrication hole (oil hole): yes; Screw clamp allows good chip evacuation.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  118.38 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Boring Tool Bit R / LAG 123 Cylindrical Shank

  [Features]A high clamp rigidity type boring tool bit for inner-diameter grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For inner-diameter grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	1.5 ～ 5	-	4.5 ～ 8	Right-hand / Left-hand	2 Corner	-

  Ordinarie pris (exklusive MOMS):

  296.12 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5 ～ 3	-	-	Right-hand / Left-hand	2 Corner	10 ～ 16

  Ordinarie pris (exklusive MOMS):

  252.11 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Grooved End Face Blade KGDF Type

  [Features] Machining applications: Flanges, blind holes; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  87.33 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max Q-Cut Tool Block

  A parting and grooving tool that improves part production capacity through high productivity and long tool life.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	35 ～ 120	No-hand	1 Corner / 2 Corner	25 ～ 50

  Ordinarie pris (exklusive MOMS):

  388.86 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max Q-Cut Plunging / Grooving Shank Bit

  A parting and grooving tool that improves part production capacity through high productivity and long tool life.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	2 ～ 6	-	15 ～ 32	Right-hand / Left-hand	1 Corner	16 ～ 32

  Ordinarie pris (exklusive MOMS):

  190.68 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max Q-Cut Shank Bit for Plunging / Grooving

  Unique shape exhibits high performance

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	-	6 ～ 22	Right-hand / Left-hand	1 Corner	8 ～ 25

  Ordinarie pris (exklusive MOMS):

  190.68 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Plunging / Grooving Shank Bit

  Unique shape exhibits high performance

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	1.5 ～ 15	-	8 ～ 50	Right-hand / Left-hand / No-hand	1 Corner / 2 Corner	10 ～ 40

  Ordinarie pris (exklusive MOMS):

  181.18 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Shank Tool Bit For Face Grooving

  [Features]A high clamp rigidity type shank holder for face grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For face grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3 ～ 8	-	12 ～ 28	Right-hand / Left-hand	2 Corner	25

  Ordinarie pris (exklusive MOMS):

  256.74 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to Blade Adaptor

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand / No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  1,026.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Manual Clamping Unit for Okuma Machines

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  2,109.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto 90° Reduction Adaptor

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand / No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  2,284.38 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  ISCAR

  Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type

  [Features] For cutting and grooving steel materials.[Features] Automatic lathe and general purpose machine are available.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2.2/2.4 ～ 4.8/5.1	28 ～ 75	-	Right-hand / Left-hand	1 Corner	10 ～ 25

  Ordinarie pris (exklusive MOMS):

  165.88 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  TUNGALOY

  End Face Grooving Cutting ETFR/L

  EasyCut End Face Grooving and Turning Tool

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  192.72 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Lathe Turning (Cutter) Bit GDG Model

  Conventional insert mounting to new holders is not recommended.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  15.91 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  23.04 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Multi-Functional / Grooving Holder KGM Type (for Automatic Board)

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  111.38 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand	-	-

  Ordinarie pris (exklusive MOMS):

  142.05 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Inner Diameter Groove SIGE Type Compatible Chip

  B dimension: Indicates machinable groove depth.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  14.83 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Slit Tip GDMS Type

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  9.23 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Cutter Holder TKN Type

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  17.62 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  Punching Blade KTKB-S Type

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand	-	-

  Ordinarie pris (exklusive MOMS):

  103.80 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  QS Holding System for CoroCut XS Bit

  Unique shape exhibits high performance

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.7-2.0	-	-	Right-hand / Left-hand	2 Corner	10 ～ 16

  Ordinarie pris (exklusive MOMS):

  183.50 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Shank Tool Bit For Shallow Grooving & Face Grooving R / LF123

  [Features]A high clamp rigidity type shank holder for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For parting and grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	-	4.5 ～ 8	Right-hand / Left-hand	2 Corner	16 ～ 25

  Ordinarie pris (exklusive MOMS):

  199.23 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Shank Tool Bit For Shallow Grooving & Face Grooving R / LG123

  [Features]A high clamp rigidity type shank holder for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For parting and grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 6	-	3.5 ～ 8	Right-hand / Left-hand	2 Corner	16 ～ 25

  Ordinarie pris (exklusive MOMS):

  199.23 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut Reinforced Shank Tool Bit For Parting With Small 1 / 2 f1 Offset, R / LF123

  [Features]A high clamp rigidity type shank holder for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented) The holder strength is high thanks to the jaw. For parting and grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	-	17 ～ 22	Right-hand / Left-hand	2 Corner	20 ～ 25

  Ordinarie pris (exklusive MOMS):

  208.71 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut 1 / 2 Shank Tool Bit For Face Grooving, Screw Clamp, R / LG123

  [Features]A high clamp rigidity type shank holder for face grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For face grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 8	-	13 ～ 20	Right-hand / Left-hand	2 Corner	25

  Ordinarie pris (exklusive MOMS):

  282.24 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut MB Adapter (Cylindrical Shank With Flat Chamfering) MB-A-HP

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	5 ～ 20	Right-hand / Left-hand	1 Corner	15 ～ 19

  Ordinarie pris (exklusive MOMS):

  241.62 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R / LF150.23

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3.17 ～ 6.35	-	19 ～ 29	Right-hand / Left-hand	1 Corner	32

  Ordinarie pris (exklusive MOMS):

  273.11 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Sandvik CoroCut 1 / 2 Plunging / Grooving Boring Bit

  [Features]· A boring bit with high clamp rigidity for inner diameter grooving.· Unique rail locking seat and V-type seat securely receive lateral cutting force, delivering highly stable machining. (Patent Acquired)[Applications]· For inner diameter grooving.

  Mer information

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  520.60 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Rectangular Shank to Coromant Capto Clamping Unit

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	40

  Ordinarie pris (exklusive MOMS):

  1,382.62 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Manual Clamping Unit for BMT Turrets

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  2,109.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroCut 1-2 Head for Face Grooving

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  378.54 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK BMT Turret Interface to Blade Adaptor

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  1,958.46 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK T-Max Q-Cut Cutting Unit for Parting and Grooving

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  432.62 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroCut 1-2 Cutting Unit for Parting and Grooving

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	15 ～ 32	Right-hand / Left-hand / No-hand	-	-

  Ordinarie pris (exklusive MOMS):

  432.62 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Top Lok Head for Grooving

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  498.38 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK T-Max Q-Cut Head for Grooving

  Application	Groove Width(mm)	Maximum Machining Diameter(mm)	Maximum Groove Depth(mm)	Cutting Direction	Number of corners for tip use	Shank height(mm)
  -	-	-	-	Right-hand / Left-hand	-	-

  Ordinarie pris (exklusive MOMS):

  178.31 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera