Spiral Taps

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  A Tap Series, Spiral Tap, A-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified	1-8UNC ～ M56	0.25 ～ 5.5	1.5P ～ 2.5P	Powder high-speed steel / Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  16.04 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Stock

  OSG

  Spiral Tap Series, General Purpose EX-SFT

  Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified	1UN ～ M56	0.25 ～ 48	2.5P ～ 3P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.97 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless EX-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	1UN ～ M42	0.4 ～ 48	2.5P ～ 3P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.81 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Carbide Spiral Tap

  [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	1.5 P ～ 2.5 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  34.46 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  Hand tap set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ Mf32	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  11.68 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  Thread repair kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M5 ～ M12	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  23.55 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	G 1" ～ M48	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  17.98 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M16	0.7 ～ 2	3P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  15.61 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  Tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ Mf32	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  5.05 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  RUKO

  Hand tap, Finish tap

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2	-	-	High-speed steel	-	Hand Tap	-	-

  Ordinarie pris (exklusive MOMS):

  5.27 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  OSG

  CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-M

  For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insert

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  31.60 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTap 200 Cutting Tap with Spiral Point

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	G 1" ～ MF30	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  19.18 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Spiral Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.92 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Aluminum, EX-AL-SFT

  Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-cast

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1	2.5P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  15.96 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

  Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M36	0.4 ～ 4	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.47 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.25 ～ 3	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  24.50 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, BSF

  General purpose tapping in steels and stainless steels

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  36.90 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  CC-NEO-SFT, HSSE spiral-fluted cutting tap for blind holes, MJ

  For general steels, stainless steels, aluminum - Variable helix for better chip evacuation

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  31.00 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  H-HL-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Helicoil EG-MJ

  For hardened steels up to 45 HRC - For thread insert

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  41.40 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  CNC tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M2 ～ Mf25	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  6.32 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  Thread gauge

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  7.95 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  FEIN

  Threaded flange

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  9.52 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Spiral Tap	For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  17.56 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT

  Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	3P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  13.15 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

  Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	3P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  32.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M48	0.3 ～ 5	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  11.72 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  YAMAWA MFG

  Plus Series Spiral Tap +SP (N+SP)

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	2.5P	High-speed steel	-	Spiral Tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  11.10 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	3P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	Available / N/A

  Ordinarie pris (exklusive MOMS):

  24.10 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Z-SFT, High speed tapping in general steels and stainless steels, Metric

  High speed tapping in general steels and stainless steels

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  33.00 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  S-LT-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  General purpose tapping in steels and stainless steels - Long reach threading

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  35.40 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  General purpose tapping in steels and stainless steels

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  17.70 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, UNC

  General purpose tapping in steels and stainless steels

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  23.60 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, BSW

  General purpose tapping in steels and stainless steels

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  20.20 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF

  For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insert

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  45.10 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  CC-LT-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  For general steels, stainless steels, aluminum - Long reach threading

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  50.80 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  E-HL-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Helicoil EG-MJ

  For Nickel-based alloys including Inconel 718 - For thread insert

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  40.10 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  OSG

  E-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJF

  For Nickel-based alloys including Inconel 718

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  41.80 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  HAZET

  Thread re-tapping head

  [Specifications]・Product type: Thread re-tapping head[Features]・Universal thread repair tool・Repairs right-hand and left-hand threads (observe direction of rotation)・All forms of metric and non-metric threads (60° flank measurement)・Quick fixation due to adjusting screw

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  85.20 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  HAZET

  Hollow turning bit

  [Specifications]・Product type: Hollow turning bit[Features]・Stud extractor

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  19.27 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  GEDORE

  Tap tool kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  290.41 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  BERNSTEIN AG

  Tap tool kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  66.60 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  WERA

  Tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  7.75 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  WERA

  Tapping combo head set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  87.75 €

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  WERA

  Tapping head set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  68.00 €

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REX TOOLS

  Tapping combo head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ M10	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  10.05 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera