Shipping Days |
|
---|
?* Information on days to ship and prices
WALTER PROTOTYP
Configure now
|
|
Starting from∗ : | 693.66 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 14.08 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 22.41 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 36.15 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 11.86 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 21.06 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 21.37 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 29.58 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 184.77 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 30.24 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 8.72 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 48.60 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 37.30 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 53.11 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 327.22 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 391.90 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
Starting from∗ |
Min. Shipping Days |
Screw Types |
Screw size (Nominal) |
Pitch (P), Number of Threading(mm) |
Chamfer threads (Lcf) |
Tool Material Type |
work material |
Tap Type |
Hole type |
Coating Y/N |
Coating Type |
Overall Length (L)(mm) |
Brand | WALTER PROTOTYP | NACHI(FUJIKOSHI) | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT | HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP | HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL | HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS | HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP | HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP | H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP | Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL | Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL | Spiral Tap For Through Holes & Trapezoidal Threads, For Left-Handed Threads SL LH Tr | |||||||||||
Starting from∗ | 693.66 € *Unit price with basic configuration | 14.08 € *Unit price with basic configuration Volume Discount | 22.41 € *Unit price with basic configuration | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 11.86 € *Unit price with basic configuration Volume Discount | 21.06 € *Unit price with basic configuration Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 29.58 € *Unit price with basic configuration Volume Discount | 184.77 € *Unit price with basic configuration | 30.24 € *Unit price with basic configuration Volume Discount | 8.72 € *Unit price with basic configuration Volume Discount | 48.60 € *Unit price with basic configuration | 37.30 € *Unit price with basic configuration Volume Discount | 53.11 € *Unit price with basic configuration Volume Discount | 327.22 € *Unit price with basic configuration | 391.90 € *Unit price with basic configuration |
Min. Shipping Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 7 Days | 8 Days | 7 Days | 8 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 8 Days | 8 Days | 7 Days | 7 Days |
Screw Types | Trapezoid | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Trapezoid | Trapezoid |
Screw size (Nominal) | Tr8 ~ Tr18 | M3 ~ M8 | M4 ~ M8 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | M3 ~ M6 | M3 ~ M12 | M3 ~ M20 | M3 ~ M12 | M4 ~ M12 | M2 ~ M24 | M4 | M3 ~ M17 | - | M3 ~ M30 | Tr 10 ~ Tr 30 | Tr 10 ~ Tr 30 |
Pitch (P), Number of Threading(mm) | 1.5 ~ 4 | 0.35 ~ 1.75 | 0.7 ~ 1.25 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | 0.5 ~ 1 | 0.5 ~ 1.75 | 0.5 ~ 2.5 | 0.5 ~ 1.75 | 0.7 ~ 1.75 | 0.25 ~ 3 | 0.7 | 0.35 ~ 3 | - | 0.5 ~ 3.5 | 2 ~ 6 | 2 ~ 6 |
Chamfer threads (Lcf) | - | 2.5 | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 5P | 5P | 5P | 2.5 | 2.5 | 2.5 | 2.5 | 5P ~ 7P | 5P ~ 5.5P | 22P ~ 30P | 22P ~ 30P |
Tool Material Type | Powder high-speed steel | High-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Carbide | Alloy HSS | High-speed steel | Alloy HSS | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] | Nickel-based alloy (Inconel, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] |
Tap Type | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
Coating Y/N | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | Available | N/A | Available | Available | Available | N/A | Available | Available | Available | N/A | N/A |
Coating Type | Non-Coated | - | Other | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | - | TiN | - | TiN | TiCN | TiCN | Non-Coated | - | Other | - | - | - |
Overall Length (L)(mm) | 90 ~ 225 | 82 | 52 ~ 70 | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 46 ~ 62 | 46 ~ 82 | 46 ~ 105 | 46 ~ 82 | 52 ~ 82 | 40 ~ 120 | 52 | 150 ~ 200 | - | 100 ~ 200 | 160 ~ 300 | 160 ~ 300 |
Loading...
Filter by:
Stock
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
Brand
CAD data type