Spiral Taps（Page 2）

238

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.31 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

OSG

Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT

OSG

Ideal for Deep Hole Drilling of Stainless Steel Over 2D

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.91 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Low Spiral LW-SFT

OSG

Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT

OSG

Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

OSG

Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	32.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for High-Carbon Steels EX-HC-SFT

OSG

Suitable for drilling holes in materials such as high carbon materials greater than medium carbon steel, die steel, alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Carbide Spiral Tap OT-SFT

OSG

Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

Select to compare

Configure now
Starting from^∗ ：	72.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Copper, CU-SFT

OSG

Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.89 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.72 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	84.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap (for metal screws)

TRUSCO NAKAYAMA

[Characteristics]
Spiral tap for regular steel.
[Use]
For pilot hole machining.
Work materials: general steel, low to medium carbon steel, alloy steel.

Select to compare

Configure now
Starting from^∗ ：	7.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel-Use Spiral Tap

ISHIHASHI

Friction torque has been reduced through the specially designed shape and special secondary processing. Oxidation treatment finishing prevents welding.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.48 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HSS-E Spiral Tap

ISHIHASHI

When used at high speeds with stainless steel / difficult-to-cut material, etc., it has two or more times the durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.85 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Use SU Spiral-Type

SKC

[Specifications]
· Shape: Spiral tap
· Screw type: metric
· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
· Material Details: SKH

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.77 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

YAMAWA MFG

We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on aluminum castings, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap for Aluminum AL+SP / AL-SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Short Spiral Tap for Stainless Steel SU-S-SP

YAMAWA MFG

[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.51 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Stainless Steel Through Holes SU+SL

YAMAWA MFG

Work hardening in blind hole processing of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel. Processable in mid-speed range of 10 M/MIN ~ 20 M/MIN.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium Coated Through Hole Spiral Tap AU+SL

YAMAWA MFG

Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.06 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Titanium Alloy, for Through Hole ZET-P

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy ZET-B

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Nickel Base Alloy ZEN-B

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coating Spiral Tap AU+ SP

YAMAWA MFG

Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Spiral Tap LS-SP(LS-N-SP)

YAMAWA MFG

* LS-N-SP will switch to LS-SP as soon as the stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)

YAMAWA MFG

* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Through Holes for High Speed F-SL

YAMAWA MFG

Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for High Speed F-SP

YAMAWA MFG

Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.58 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel HC+SP / HC-SP

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

YAMAWA MFG

Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Short Spiral Tap for Deep Holes S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For Soft Steel / Esper E-SP

YAMAWA MFG

A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

YAMAWA MFG

Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.71 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.94 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	ISHIHASHI	ISHIHASHI	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG
Product Series	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, Low Spiral LW-SFT	Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT	Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT	Spiral Tap Series, for High-Carbon Steels EX-HC-SFT	Spiral Tap Series, Carbide Spiral Tap OT-SFT	Spiral Tap Series, for Copper, CU-SFT	Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT	Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT	Spiral Tap (for metal screws)	Stainless Steel-Use Spiral Tap	HSS-E Spiral Tap	Stainless Steel-Use SU Spiral-Type	HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP	HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP	H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP	Spiral Tap for Aluminum AL+SP / AL-SP	Short Spiral Tap for Stainless Steel SU-S-SP	Spiral Tap for Stainless Steel SU+SP / SU-SP	Spiral Tap for Stainless Steel Through Holes SU+SL	Titanium Coated Through Hole Spiral Tap AU+SL	Spiral Tap for Titanium Alloy, for Through Hole ZET-P	Spiral Tap for Titanium Alloy ZET-B	Spiral Tap for Nickel Base Alloy ZEN-B	Coating Spiral Tap AU+ SP	Long Shank Spiral Tap LS-SP(LS-N-SP)	Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)	Spiral Tap for Through Holes for High Speed F-SL	Spiral Tap for High Speed F-SP	Spiral Tap For High Carbon Steel HC+SP / HC-SP	Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX	Short Spiral Tap for Deep Holes S-SP	Spiral Tap For Soft Steel / Esper E-SP	Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP	Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W	Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L
Starting from^∗	17.31 € *Unit price with basic configuration Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	25.91 € *Unit price with basic configuration Volume Discount	14.52 € *Unit price with basic configuration Volume Discount	9.50 € *Unit price with basic configuration Volume Discount	8.78 € *Unit price with basic configuration Volume Discount	32.98 € *Unit price with basic configuration	16.26 € *Unit price with basic configuration Volume Discount	72.40 € *Unit price with basic configuration	26.27 € *Unit price with basic configuration	8.89 € *Unit price with basic configuration Volume Discount	11.72 € *Unit price with basic configuration Volume Discount	84.11 € *Unit price with basic configuration Volume Discount	11.71 € *Unit price with basic configuration Volume Discount	7.76 € *Unit price with basic configuration	16.48 € *Unit price with basic configuration Volume Discount	29.85 € *Unit price with basic configuration Volume Discount	18.77 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	11.86 € *Unit price with basic configuration Volume Discount	15.69 € *Unit price with basic configuration Volume Discount	11.51 € *Unit price with basic configuration Volume Discount	11.86 € *Unit price with basic configuration Volume Discount	21.06 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.66 € *Unit price with basic configuration Volume Discount	87.04 € *Unit price with basic configuration	37.13 € *Unit price with basic configuration Volume Discount	29.58 € *Unit price with basic configuration Volume Discount	29.58 € *Unit price with basic configuration Volume Discount	10.27 € *Unit price with basic configuration Volume Discount	11.36 € *Unit price with basic configuration Volume Discount	12.65 € *Unit price with basic configuration Volume Discount	12.18 € *Unit price with basic configuration Volume Discount	13.71 € *Unit price with basic configuration Volume Discount	9.74 € *Unit price with basic configuration Volume Discount	12.94 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	Same day	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	6 Days	Same day	Same day	Same day	8 Days	8 Days	7 Days	8 Days	8 Days	7 Days	8 Days	6 Days	6 Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	7 Days	6 Days	8 Days	6 Days	6 Days	Same day	6 Days	Same day
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Whitworth	Meter	Meter	Meter	Meter	Whitworth	Meter
Screw size (Nominal)	M8 ～ M22	M2.5 ～ M10	M3	M3 ～ M24	M6	M5 ～ M24	M3 ～ M10	M10 ～ M12	M3 ～ M12	M10	M2.6 ～ M10	M1.4 ～ M48	M16	M8 ～ M16	M4 ～ M5	M2.6 ～ M4	M4	M4 ～ M14	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M2 ～ M16	M3 ～ M20	No.10-32UNF ～ M45	M3 ～ M6	M3 ～ M12	M3 ～ M20	M3 ～ M20	M3 ～ M20	M2 ～ M12	M16	M3 ～ M12	M3 ～ M12	M3 ～ M12	1/2W12 ～ M30	M3 ～ M16	M2 ～ M45	M3 ～ M24	M3 ～ M24	W1/8	M3 ～ M30
Pitch (P), Number of Threading(mm)	1 ～ 2.5	0.45 ～ 1.5	0.5	0.5 ～ 3	1	0.8 ～ 3	0.5 ～ 1.5	1.25 ～ 1.5	0.5 ～ 1.75	1.5	0.45 ～ 1.5	0.3 ～ 5	2	1.25 ～ 1.5	0.7 ～ 0.8	0.45 ～ 0.7	0.7	0.7 ～ 2	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	0.4 ～ 2	0.5 ～ 2.5	0.3 ～ 4.5	0.5 ～ 1	0.5 ～ 1.75	0.5 ～ 2.5	0.5 ～ 2.5	0.5 ～ 2.5	0.4 ～ 1.75	2	0.5 ～ 1.75	0.5 ～ 1.75	0.5 ～ 1.75	0.5 ～ 3	0.5 ～ 2	0.4 ～ 4.5	0.5 ～ 3	0.5 ～ 3	40	0.5 ～ 3.5
Chamfer threads (Lcf)	1.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	3P	1.5P ～ 2.5P	2.5P	2.5P	3P	3P	2.5P	2.5P	-	-	-	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	5P	5P	5P	3P	3P	2.5P	2.5P	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2.5P
Tool Material Type	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	High-speed steel	-	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○/◎] / Brass (Bs)[○/◎] / Brass cast iron (BsC)[○/◎] / Bronze (Pb)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	-	-	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	N/A	N/A	N/A	N/A	N/A	N/A	Available	N/A	N/A	Available	N/A	N/A	N/A	N/A	-	Available	Available	-	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	N/A	N/A	Available	N/A	N/A	N/A	Available	N/A	N/A	Available	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	CrN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Other	TiN	-	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	-	-	-	-	TiN	-	-	-	TiN	-	-	TiN	TiN	-	-	-	-	-	Non-Coated	Non-Coated
Overall Length (L)(mm)	70 ～ 115	44 ～ 75	120	100 ～ 150	62	60 ～ 120	100 ～ 150	75 ～ 82	46 ～ 82	75	44 ～ 75	34 ～ 185	150	70 ～ 95	52 ～ 60	44 ～ 52	52	-	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	42 ～ 95	46 ～ 105	36 ～ 180	46 ～ 62	46 ～ 82	46 ～ 105	46 ～ 105	46 ～ 105	42 ～ 82	150	100 ～ 150	46 ～ 82	46 ～ 82	46 ～ 135	46 ～ 95	42 ～ 180	46 ～ 120	46 ～ 120	46	46 ～ 135