Point Taps (Tap Type: Point tap)

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for General, EX-POT

  Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth / Sewing Machine	No0UN ～ M48	0.25 ～ 80	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.45 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  YAMAWA MFG

  Carbide Tap for Ultra High Hardness Steel UH-CT

  [SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M20	0.4 ～ 2.5	5P	Carbide	High Hardness Steel (50-60 HRC)[○]	Point tap	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  102.84 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

  In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	Powder high-speed steel	Nickel-based alloy (Inconel, etc.)[◎]	Point tap	For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  28.34 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for Difficult-to-Machine Material, CPM-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M48	0.3 ～ 5	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  9.49 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  MISUMI

  TiN Coated High-Speed Steel Point Tap【1 till 5 stycken】

  [Features] -Can be used for through hole machining-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.-Excellent abrasion resistance and resistance to chip welding due to TiN coating-Long shank, ideal for drilling deep tapped holes (G-LS-POT).

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  14.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Point Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.09 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Tin Coated, TIN-POT

  Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M42	0.3 ～ 4.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  15.45 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series For Stainless Steel Use EX-SUS-POT

  Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	1UN ～ M42	0.3 ～ 48	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.65 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  A Tap Series for Pipes Point Tap A-POT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified	1/2-20UNF ～ M24	0.25 ～ 3	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  15.94 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  YAMAWA MFG

  Carbide Tap for High Hardness Steel EH-CT

  Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M5	0.8	5P	Carbide	Quenched and tempered steel (45 to 55 HRC)[○]	Point tap	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  104.54 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Short Point Tap for Deep Holes S-PO

  A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Short thread length gives low frictional resistance.· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M10	0.4 ～ 1.5	5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  12.65 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  OSG

  A Tap Series Point Tap Long Shank A-LT-POT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.25 ～ 3	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  23.65 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Point Tap【10 stycken】

  [Features] -High speed uncoated steel tap with spiral point-Can be used for through hole machining-Effective for continuous chip materials such as carbon steel and steel alloys.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  63.74 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

  Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  22.83 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, V Coated, V-POT

  Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M10	1 ～ 1.25	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  24.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Point Tap Series, V Coating, Long Shank, V-LT-POT

  Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M6	0.7 ～ 1	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  23.17 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

  Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	6P	Vanadium High-Speed Steel	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  11.81 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

  Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.35 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment, EX-H-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M42	0.4 ～ 4.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.22 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, General Long Shank, EX-LT-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M36	0.4 ～ 4	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.02 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Ultra Synchronizing Taps, HS-RFT

  Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M14	0.5 ～ 2	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  30.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

  Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M14	0.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  21.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

  Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M30	0.5 ～ 3.5	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  27.13 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for Deep Holes, EX-DH-POT

  Suitable for through holes with extra long threads and materials that easily suffer sticking.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M16	0.4 ～ 2	4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.65 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M12	1.25 ～ 1.75	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  40.05 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, for Thin Plates, EX-SS-POT

  Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.61 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  TRUSCO NAKAYAMA

  Point Tap (for metric screws)

  [Features] High-speed tapping is possible. Homogenization treated. [Use] For through hole machining. Work materials: general steel, low to cedium carbon steel, alloy steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M5 ～ M6	0.8 ～ 1	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Point tap	For through hole	-

  Ordinarie pris (exklusive MOMS):

  11.64 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  YAMAWA MFG

  Stainless Steel Point Tap SU+PO / SU-PO

  Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	No.2-56UNC ～ M16	0.35 ～ 2	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  12.65 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Titanium coating point tab PO-V (N-PO-V)

  Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M12	0.5 ～ 1.75	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  29.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Nut Tap NT

  Straight nut tap mainly used for machining nuts using a tapping machine.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	24P	High-speed steel	-	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  52.77 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Tap with Nickel Base Alloy ZEN-P

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M12	0.5 ～ 1.75	4.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  21.37 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  YAMAWA MFG

  Plus Series Point Tap +PO (N+PO)

  * N+SP will be replaced with +SP as soon as there is no more in stock.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M6	0.5 ～ 1	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Point tap	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  11.11 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Point Tap For High Carbon Steel HC+PO / HC-PO

  It is suitable for tapping high carbon steel such as S55C.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M22	0.5 ～ 2.5	5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  10.27 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Point Tap for Difficult-to-Cut Materials EH-PO

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M18	0.5 ～ 2.5	4.5P	Cobalt HSS	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.05 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M20	0.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.02 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SANDVIK

  Point Tap CoroTap 200 (For Metric Threads)

  [Features]· A high-productivity tap tool.· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.· There are different taps for different work materials, making selecting a tap simple[Applications]· For machining through holes.· Work material: heat-resistant alloys, steel, stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M5 ～ M8	0.8 ～ 1.25	-	-	-	Point tap	-	N/A

  Ordinarie pris (exklusive MOMS):

  26.00 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SANDVIK

  CoroTap 200 3 × DN Point Tap JIS EP0DM

  [Features]·Wide selection of power strip for different work materials·For work materials with long cutting chips

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	-	-	-	Point tap	-	Available

  Ordinarie pris (exklusive MOMS):

  38.34 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)

  [Features]· A high-productivity tap tool.· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.· There are different taps for different work materials, making selecting a tap simple[Applications]· For machining through holes.· Work material: steel, cast iron, aluminum alloy.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M12	1	-	-	-	Point tap	-	Available

  Ordinarie pris (exklusive MOMS):

  76.42 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  NACHI(FUJIKOSHI)

  SG Point Tap SGPO

  [Features]・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2.6	0.45	5	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  36.74 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  I Series Point Tap IPO Blister Pack

  [Features]· Through-hole tap for low speed machining with a drilling machine.· Use for machining iron products (SPC, SS400, etc.) that are commonly available.· Has a surface treatment (oxide treated) that is ideal for machining iron.· Machines small amounts of female threads for product prototypes.· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	-	-	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  16.03 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  YAMAWA MFG

  Oxidized Point Tap For High Carbon Steel HC-PO OX

  [Features]· A point tap suitable for tapping high carbon steel varieties such as S55C.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	High-speed steel	High Carbon Steel (C with a content over 0.45%)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  25.02 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

  [Features]· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M20	0.7 ～ 2	4.5P ～ 5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  46.78 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Point Tap For Aluminum (For Insert Coil) AL-PO

  [Features]· A part for use with comparatively soft materials such as aluminum. For female thread machining so that insert coils can be inserted with the purpose of reinforcing female threads and increasing durability.· Especially for through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	STI M3 ～ STI M8	0.5 ～ 1.25	5P	High-speed steel	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  26.70 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera