Kategori

Se mer

Filtreringsvillkor

Rensa alla

Lager
Visa endast lagervaror

Screw Types

Meter

Screw size (Nominal)

Pitch (P), Number of Threading(mm)

0.5
0.75
1
1.25
1.5
1.75

Chamfer threads (Lcf)

4P
4.5P
5 P
5P
6P

Tool Material Type

High-speed steel
Cobalt HSS
Powder high-speed steel
Vanadium High-Speed Steel

work material

Low-Carbon Steel (carbon alloy less than 0.25%)
Medium carbon steel (carbon content 0.25 to 0.45%)
High Carbon Steel (C with a content over 0.45%)
Alloy Steel (SCM)
Stainless Steel (JIS-SUS)
Quenched and tempered steel (25 to 35 HRC)
Quenched and tempered steel (35 to 45 HRC)
Tool Steel (Before SKD Hardening)
Steel casting (SC)
Cast Iron (FC)
Ductile Cast Iron (FCD)
Copper (Cu)
Brass (Bs)
Brass cast iron (BsC)
Bronze (Pb)
Aluminum Rolled Material (AL)
Aluminum Alloy Casting (AC, ADC)
Magnesium Alloy (MC)
Zinc Alloy Casting (ZDC)
Titanium Alloy (Ti-6Al-4V, etc)
Nickel-based alloy (Inconel, etc.)
Thermoplastic plastic (vinyl chloride, nylon, etc.)

Tap Type

Point tap

Hole type

For through hole

Coating Y/N

Available
N/A

Coating Type

TiCN
TiN
Non-Coated
Other

Overall Length (L)(mm)

Tillverkare

Point Taps (Screw size (Nominal): M12)

33 poster

* Information om dagar till leverans, fraktkostnader och priser

Lista

Foto

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

- Volume Discount
REX TOOLS
Thread repair kit
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M5 ～ M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
142.01 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
- Volume Discount
REX TOOLS
Hand tap set
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
20.32 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M5 ～ M12	-	-	-	-	-	-	-

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M12	-	-	-	-	-	-	-

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for General, EX-POT

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	0.5 ～ 1.75	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

18.77 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

24.83 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Titanium coating point tab PO-V (N-PO-V)

Volume Discount

YAMAWA MFG

Titanium coating point tab PO-V (N-PO-V)

Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.75	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

58.36 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

- Volume Discount
REX TOOLS
CNC tapping head
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M3 ～ M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
14.89 €～
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M3 ～ M12	-	-	-	-	-	-	-

Volume Discount

OSG

Point Tap Series, Tin Coated, TIN-POT

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

31.58 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series For Stainless Steel Use EX-SUS-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series For Stainless Steel Use EX-SUS-POT

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1 ～ 1.75	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

19.82 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

OSG

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

48.36 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Volume Discount

OSG

A Tap Series for Pipes Point Tap A-POT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1 ～ 1.75	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

31.58 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

OSG

A Tap Series Point Tap Long Shank A-LT-POT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1 ～ 1.75	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

35.82 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

- Volume Discount
REX TOOLS
Tap tool kit
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M3 ～ M14 - - - - - - -
Ordinarie pris (exklusive MOMS):
74.28 €～
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
SANDVIK
SANDVIK CoroTap 100 Cutting Tap with Straight Flutes
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
70.54 €～
Ordinarie avsändningsdatum:
5 arbetsdagar
Konfigurera

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M3 ～ M14	-	-	-	-	-	-	-

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	-	-	-	-	-	-	-

Volume Discount

MISUMI

High-Speed Steel Point Tap【10 stycken】

[Features] -High speed uncoated steel tap with spiral point-Can be used for through hole machining-Effective for continuous chip materials such as carbon steel and steel alloys.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.75	5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

166.42 €

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

MISUMI

MT Series High-Speed Steel Point Tap

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

18.91 €

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Volume Discount

OSG

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

61.28 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

Volume Discount

OSG

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

41.15 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, General Homo Treatment, EX-H-POT

Volume Discount

OSG

Point Tap Series, General Homo Treatment, EX-H-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

18.42 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, General Long Shank, EX-LT-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, General Long Shank, EX-LT-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1 ～ 1.75	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

25.83 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

Volume Discount

OSG

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

42.66 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

Volume Discount

OSG

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

45.06 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, for Deep Holes, EX-DH-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for Deep Holes, EX-DH-POT

Suitable for through holes with extra long threads and materials that easily suffer sticking.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.5 ～ 1.75	4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

20.73 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

Volume Discount

OSG

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.5 ～ 1.75	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

58.98 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, for Thin Plates, EX-SS-POT

Volume Discount

OSG

Point Tap Series, for Thin Plates, EX-SS-POT

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.5 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

20.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Volume Discount

YAMAWA MFG

Tap with Nickel Base Alloy ZEN-P

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.75	4.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

63.60 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

Volume Discount

OSG

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

41.15 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

- Volume Discount
SANDVIK
CoroTap 200 3 × DN Point Tap JIS EP0DM
[Features]·Wide selection of power strip for different work materials·For work materials with long cutting chips
Mer information
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M12 1.75 - - - Point tap - Available
Ordinarie pris (exklusive MOMS):
69.79 €
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera
SANDVIK
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
[Features]· A high-productivity tap tool.· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.· There are different taps for different work materials, making selecting a tap simple[Applications]· For machining through holes.· Work material: steel, cast iron, aluminum alloy.
Mer information
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M12 1 - - - Point tap - Available
Ordinarie pris (exklusive MOMS):
102.75 €
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.75	-	-	-	Point tap	-	Available

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1	-	-	-	Point tap	-	Available

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

Volume Discount

YAMAWA MFG

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

[Features]· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M12	1.25	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

91.80 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

- Volume Discount
REX TOOLS
Die metric
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
10.05 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
- Volume Discount
REX TOOLS
Die guide bush
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
3.44 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
- Volume Discount
REX TOOLS
Die tool kit
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M3 ～ M12 - - - - - - -
Ordinarie pris (exklusive MOMS):
34.44 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
- Volume Discount
REX TOOLS
Die metric (precision)
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M12 ～ M12 x 1.5 - - - - - - -
Ordinarie pris (exklusive MOMS):
20.32 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera

Point Taps (Screw size (Nominal): M12)

Kategorier som hör till Point Taps