Kategori

Se mer

Filtreringsvillkor

Rensa alla

Screw Types
- Meter
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
- 1
- 1.25
- 1.5
- 2
Chamfer threads (Lcf)
- 4P
- 5 P
- 5P
- 6P
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- Vanadium High-Speed Steel
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Tap Type
- Point tap
Hole type
- For through hole
Coating Y/N
- Available
- N/A
Coating Type
- TiN
- Non-Coated
- Other
Overall Length (L)(mm)
- 88
- 100
- 110
- 120
- 150
- 200
Tillverkare

Point Taps (Screw size (Nominal): M14)

20 poster

* Information om dagar till leverans, fraktkostnader och priser

Lista

Foto

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for General, EX-POT

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1 ～ 2	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

24.88 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

41.85 €

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Volume Discount

MISUMI

MT Series High-Speed Steel Point Tap

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

22.59 €

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

OSG

Point Tap Series, Tin Coated, TIN-POT

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

43.86 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series For Stainless Steel Use EX-SUS-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series For Stainless Steel Use EX-SUS-POT

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

26.73 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Volume Discount

OSG

A Tap Series for Pipes Point Tap A-POT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1 ～ 2	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

44.20 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

OSG

A Tap Series Point Tap Long Shank A-LT-POT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1 ～ 2	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

66.69 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

- Volume Discount
REX TOOLS
Tap tool kit
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M3 ～ M14 - - - - - - -
Ordinarie pris (exklusive MOMS):
263.00 €
Ordinarie avsändningsdatum:
3 arbetsdagar
Konfigurera
SANDVIK
SANDVIK CoroTap 100 Cutting Tap with Straight Flutes
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M14 - - - - - - -
Ordinarie pris (exklusive MOMS):
98.86 €～
Ordinarie avsändningsdatum:
5 arbetsdagar
Konfigurera

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M3 ～ M14	-	-	-	-	-	-	-

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	-	-	-	-	-	-	-

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Volume Discount

OSG

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

75.70 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

Volume Discount

OSG

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

50.87 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, General Homo Treatment, EX-H-POT

Volume Discount

OSG

Point Tap Series, General Homo Treatment, EX-H-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

26.13 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, General Long Shank, EX-LT-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, General Long Shank, EX-LT-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1 ～ 2	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

35.25 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

Volume Discount

OSG

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

53.67 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

Volume Discount

OSG

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

56.57 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

OSG

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Ordinarie pris (exklusive MOMS):

87.72 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Point Tap Series, for Deep Holes, EX-DH-POT

KAMPANJFÖRSÄLJNING
Volume Discount

OSG

Point Tap Series, for Deep Holes, EX-DH-POT

Suitable for through holes with extra long threads and materials that easily suffer sticking.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

28.04 €

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount

YAMAWA MFG

Stainless Steel Point Tap SU+PO / SU-PO

Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Mer information

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

45.02 €

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

Volume Discount

OSG

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1.5 ～ 2	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Ordinarie pris (exklusive MOMS):

50.87 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

- Volume Discount
FEIN
Tap insert
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M14 - - - - - - -
Ordinarie pris (exklusive MOMS):
301.37 €
Ordinarie avsändningsdatum:
6 arbetsdagar
Konfigurera

Point Taps (Screw size (Nominal): M14)

Kategorier som hör till Point Taps