Point Taps (Screw size (Nominal): M18)

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for General, EX-POT

  Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1 ～ 2.5	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  43.41 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for Difficult-to-Machine Material, CPM-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  75.70 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Tin Coated, TIN-POT

  Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  73.30 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series For Stainless Steel Use EX-SUS-POT

  Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  47.26 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

  Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	6P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  107.25 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  A Tap Series for Pipes Point Tap A-POT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1 ～ 2.5	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  73.64 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  A Tap Series Point Tap Long Shank A-LT-POT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1 ～ 2.5	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  86.52 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  145.38 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

  Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  93.17 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

  Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	2.5	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  91.92 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment, EX-H-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  46.56 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, General Long Shank, EX-LT-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  72.70 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Point Tap for Difficult-to-Cut Materials EH-PO

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	2.5	4.5P	Cobalt HSS	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  131.08 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	1.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  72.70 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SANDVIK

  CoroTap 200 3 × DN Point Tap JIS EP0DM

  [Features]·Wide selection of power strip for different work materials·For work materials with long cutting chips

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	2.5	-	-	-	Point tap	-	Available

  Ordinarie pris (exklusive MOMS):

  100.03 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  YAMAWA MFG

  Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

  [Features]· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M18	2.5	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Point tap	For through hole	Available

  Ordinarie pris (exklusive MOMS):

  162.72 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  FEIN

  Tap insert

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M18	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  96.12 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera