Point Taps (Tool Material Type: Carbide)

• 

  YAMAWA MFG

  Carbide Tap for Ultra High Hardness Steel UH-CT

  [SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M20	0.4 ～ 2.5	5P	Carbide	High Hardness Steel (50-60 HRC)[○]	Point tap	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  98.87 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  YAMAWA MFG

  Carbide Tap for High Hardness Steel EH-CT

  Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M5	0.8	5P	Carbide	Quenched and tempered steel (45 to 55 HRC)[○]	Point tap	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  100.50 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera