Point Taps (Coating Type: Non-Coated)

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for General, EX-POT

  Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth / Sewing Machine	No0UN ～ M48	0.25 ～ 80	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.45 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for Difficult-to-Machine Material, CPM-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M48	0.3 ～ 5	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  9.49 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Point Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  6.83 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series For Stainless Steel Use EX-SUS-POT

  Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	1UN ～ M42	0.3 ～ 48	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.65 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

  Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	6P	Vanadium High-Speed Steel	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  11.81 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

  Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.35 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment, EX-H-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M42	0.4 ～ 4.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.22 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, General Long Shank, EX-LT-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M36	0.4 ～ 4	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.02 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Point Tap Series, for Deep Holes, EX-DH-POT

  Suitable for through holes with extra long threads and materials that easily suffer sticking.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M16	0.4 ～ 2	4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  8.65 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M12	1.25 ～ 1.75	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  40.05 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, for Thin Plates, EX-SS-POT

  Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  7.61 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M20	0.5 ～ 2.5	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Ordinarie pris (exklusive MOMS):

  14.02 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera