Taps for Pipes (Screw size (Nominal): R3/8)

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  OSG

  Taper Tap Series for Pipes General Applications TPT

  For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  38.17 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

  Used for machining of pipe taper female threads, but is suitable for easy processing conditions

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	3P	Powder high-speed steel	Quenched and tempered steel (45 to 55 HRC)[◎]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  89.52 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT

  This is a short thread, long shank type used for machining tapered internal threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  84.71 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes TIN Coated TIN-TPT

  TIN coating with excellent solvent resistance, abrasion resistance has been applied.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  69.69 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT

  TIN coating with excellent solvent resistance, abrasion resistance has been applied.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  88.92 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT

  TIN coating with excellent solvent resistance, abrasion resistance has been applied.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  93.13 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT

  TIN coating with excellent solvent resistance, abrasion resistance has been applied.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  72.70 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT

  Exhibits Exceptional Power Toward 50-60 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, etc.)

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	3P	Carbide	High Hardness Steel (50-60 HRC)[◎]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  271.92 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes For Aluminum V-AL-TPT

  Ideal for taper female screw machining for aluminum alloy tube, as gouging of female screw occurs easily

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Vanadium High-Speed Steel	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Tap for pipes	For through hole / For blind hole	Available

  Ordinarie pris (exklusive MOMS):

  58.18 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  91.92 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  65.12 €

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  96.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT

  It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	-	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  53.57 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT

  This type with a long shaft is used for machining tapered internal threads in pipes. It is suitable for difficult-to-cut materials such as stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  72.10 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT

  This is a short thread type used for machining tapered internal threads in pipes. It is suitable for blind holes with hard-to-cut materials such as stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎]	Tap for pipes	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  71.23 €

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT

  This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  57.11 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Spiral Fluted SFT-TPT

  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Tap for pipes	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  53.91 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT

  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Tap for pipes	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  72.10 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT

  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Tap for pipes	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  86.52 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT

  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Tap for pipes	For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  58.52 €

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes General Applications Short Screw S-TPT

  For use when machining tapered female threads for pipes. Short Threaded Type used for tapping short-length threads, such as Elbow, Tees, etc.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  42.79 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Taper Tap OT-TPT

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  202.58 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  230.48 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Carbide	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  202.58 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  68.23 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Powder high-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  72.10 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  OSG

  Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Mer information

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  93.52 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  OSG

  Taper Tap Series for Pipes Interrupted Thread (PT) EX-IRT-PT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Taper for Pipe	R3/8	19	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○]	Tap for pipes	For through hole / For blind hole	N/A

  Ordinarie pris (exklusive MOMS):

  56.61 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera