Reamers (work material: High Hardness Steel)
Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
11 poster
* Information om dagar till leverans, fraktkostnader och priser
- Volume Discount
MISUMI
[Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracyMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2 ～ 10 End Mill Shank High Hardness Steel[○] 12 ～ 52 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):110.92 €～Ordinarie avsändningsdatum:5 arbetsdagar
- Volume Discount
MISUMI
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
[Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 10 End Mill Shank High Hardness Steel[◎] 12 ～ 40 Available ～ N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):35.08 €～Ordinarie avsändningsdatum:5 arbetsdagar
IWATA TOOL
Toglon® Hard Reamer ALT Coating
[Features]· HRC40-72 hardened steel can be machined.· 4-fluteMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 12 End Mill Shank High Hardness Steel[○] 40 ～ 70 Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):79.43 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
EIKOSHA
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 12.05 End Mill Shank High Hardness Steel[◎] 40 ～ 65 Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):63.38 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
Carbide Chucking Reamer CCRFM (OK Tough Coat)
[Features]・ OK Tough Coat realizes high speed machining and long life・ Solid type・ Capable of deep hole machining thanks to a neck diameter thinner than the blade diameterMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 2.96 End Mill Shank High Hardness Steel[○] 26 ～ 31 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):49.53 €～Ordinarie avsändningsdatum:10 arbetsdagar
OKAZAKI SEIKO
Carbide Reamer with End Blade CERFM (OK Tough Coat)
[Features]・ OK Tough Coat realizes high speed machining and long life・ Solid type・ Reamer for complete blind holes, capable of cleanly machining bottom surfaces.・ Adopts an end mill shankMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 2.96 End Mill Shank High Hardness Steel[○] 26 ～ 31 Available Spiral Available - - KonfigureraOrdinarie pris (exklusive MOMS):121.05 €～Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
Carbide Hard Reamer CKRH / CKRHM
[Features]・ OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・Can be used to machine high-hardness materials of up to HRC62.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 12 End Mill Shank High Hardness Steel[◎] - Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):77.03 €～Ordinarie avsändningsdatum:6 arbetsdagar
OKAZAKI SEIKO
Carbide Powerful Reamer CPRFM (OK Tough Coat)
[Features]・OKTough Coat realizes high speed machining and long life・ Solid type・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip ・ Torsion angle 45°Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 2.96 End Mill Shank High Hardness Steel[○] 26 ～ 31 Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):101.35 €～Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
[Features]・OKTough Coat realizes high speed machining and long life・ Solid type・ The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip・ Torsion angle 35°Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 2.96 End Mill Shank High Hardness Steel[○] 30 Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):49.53 €～Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
Carbide Short Reamer CSRFM (OK Tough Coat)
[Features]・ OK Tough Coat realizes high speed machining and long life・ Solid typeMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 2.96 End Mill Shank High Hardness Steel[○] 27 ～ 30 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):55.88 €～Ordinarie avsändningsdatum:10 arbetsdagar
FPTOOLS
Carbide Reamer R Series with Oil Hole CR-H
[Features]· By adding an oil hole, the influence of heat during machining can be suppressed and the abrasion resistance is improved.· The short product length improves tool rigidity and enables even higher-precision machining.· As with the R Series, it is capable of machining everything from difficult-to-cut materials such as stainless steel to high hardness steel.· Blade diameter tolerance of +0.005/0 is adopted.· By injecting cutting oil from the oil hole provided in the blade groove and applying it directly to the blade tip, the influence of heat during machining can be suppressed.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 4.97 ～ 10.03 - High Hardness Steel[◎] 20 ～ 30 Available Spiral N/A - - KonfigureraOrdinarie pris (exklusive MOMS):101.96 €～Ordinarie avsändningsdatum:6 arbetsdagar