Reamers (Groove Shape: Straight)
Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
76 poster
* Information om dagar till leverans, fraktkostnader och priser
- Volume Discount
MISUMI
High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
[Features] -Standard hand reamer with straight blade-Cutting diameter can be selected in units of 0.01 mm.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 30 Straight Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 12 ～ 150 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):22.89 €～Ordinarie avsändningsdatum:5 arbetsdagar
- Volume Discount
OSG
The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 13.05 End Mill Shank / Straight Shank General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] - N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):35.50 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
EIKOSHA
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 10.05 Straight Shank General Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] 20 ～ 150 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):83.85 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
HRM Hand Reamer (Hundredths Range)
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1.01 ～ 10.09 Straight Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 20 ～ 70 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):31.57 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 85 Taper shank / Morse Taper Shank General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] 35 ～ 215 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):100.37 €～Ordinarie avsändningsdatum:6 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
EIKOSHA
Straight Shank Chucking Reamer SCR
For General-Purpose Short blade, long shank, for deep hole finishingMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 32 Straight Shank General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 15 ～ 75 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):78.54 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
MISUMI
[Features] -Standard straight edge machine reamer. Morse taper shank-Cutting diameter selectable in units of 0.01 mm.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 30.02 Taper shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 35 ～ 150 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):108.45 €～Ordinarie avsändningsdatum:7 arbetsdagar
- Volume Discount
EIKOSHA
For long type deep hole, Hold on slop to improve assistance 1Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1/2 ～ 26 Straight Shank General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 50 ～ 250 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):98.43 €～Ordinarie avsändningsdatum:6 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.2 ～ 12.1 End Mill Shank General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] 3 ～ 45 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):26.28 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- Volume Discount
MISUMI
[Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracyMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2 ～ 10 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] 12 ～ 52 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):110.92 €～Ordinarie avsändningsdatum:5 arbetsdagar
MISUMI
Carbide Step Reamer, Custom Dimensions Type
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possibleMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - End Mill Shank General Steel[◎] / Aluminum[◎] - N/A Straight - - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
FPTOOLS
F.P. Gold Reamer Straight Blade
[Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 14.05 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] 20 ～ 85 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):29.83 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- Volume Discount
EIKOSHA
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 20.05 Straight Shank General Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] 4 ～ 80 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):33.01 €～Ordinarie avsändningsdatum:6 arbetsdagar
EIKOSHA
Carbide Long Shank Chucking Reamer CSCRL
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 20 Straight Shank General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] 35 ～ 60 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):135.90 €～Ordinarie avsändningsdatum:6 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot holeMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 15.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 48 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
MISUMI
Carbide Straight Reamer, Regular Model
[Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute lengthMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 15.99 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 48 N/A Straight N/A - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
MISUMI
Carbide Precision Straight Reamer
It is capable of finishing holes with clean surface roughness compared to the normal reamer.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 5.9 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 3 ～ 10 N/A Straight N/A - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
- Volume Discount
EIKOSHA
Carbide Solid Pivot Reamer CSRR-3
Small Diameter Use Reamer φ193 ShankMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.2 ～ 3 Straight Shank General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] 3 ～ 25 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):51.73 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
EIKOSHA
For General-Purpose Short blade, long shank, for deep hole finishingMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 30 Straight Shank General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] 15 ～ 75 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):86.51 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
EIKOSHA
For 1/50 Taper PinsMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - Straight Shank General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] 28 ～ 194 N/A Straight N/A 1 ～ 13 1.46 ～ 16.74 KonfigureraOrdinarie pris (exklusive MOMS):65.14 €～Ordinarie avsändningsdatum:6 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
EIKOSHA
For 1/48 and 1/50 Taper PinsMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - Straight Shank General Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 99 ～ 194 N/A Straight N/A 6 ～ 12 7.88 ～ 15.74 KonfigureraOrdinarie pris (exklusive MOMS):45.12 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- KAMPANJFÖRSÄLJNING
- Volume Discount
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 10.009 End Mill Shank General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] 5 ～ 40 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):65.44 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- KAMPANJFÖRSÄLJNING
- Volume Discount
FPTOOLS
[Features]· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.· Blade diameter tolerance is unique at +0.005/0(J5).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 16.02 End Mill Shank / Straight Shank General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] 7 ～ 95 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):19.93 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- Volume Discount
OKAZAKI SEIKO
BCCR Carbide Chucking Reamer (Straight Shank)
Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 12.5 ～ 30 Straight Shank General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] 36 ～ 46 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):124.74 €～Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
CSR Carbide Short Reamer (Straight Shank)
Solid type. Boasts life ten times longer than HSS reamer. Corresponds to a wide range of workpieces from cast iron to steel. Capable of high accuracy drilling. Reduces machining time.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 20 Straight Shank General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] 12 ～ 45 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):31.56 €～Ordinarie avsändningsdatum:8 arbetsdagar- KAMPANJFÖRSÄLJNING
- Volume Discount
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 40 Straight Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 20 ～ 165 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):31.56 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
OKAZAKI SEIKO
LMR Long-Bladed Machine Reamer
Abundant variety of blade lengths. Ideal for deep drilling. Uses MCo material (cobalt high speed steel).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 5 ～ 50 Morse Taper Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 150 ～ 400 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):167.59 €～Ordinarie avsändningsdatum:7 arbetsdagar
EIKOSHA
Long Shank Chucking Reamer SCRL
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 20 Straight Shank General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 35 ～ 60 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):98.49 €～Ordinarie avsändningsdatum:6 arbetsdagar
TAIYO-TOOL
[Shank Type]· Straight shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] NMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1-1/2 ～ 51 Straight Shank - 85 ～ 180 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):104.91 €～Ordinarie avsändningsdatum:6 arbetsdagar
TAIYO-TOOL
[Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] NMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1-5/8 ～ 80 Morse Taper Shank - 35 ～ 220 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):97.97 €～Ordinarie avsändningsdatum:6 arbetsdagar
DAIICHITOOL
[Features] Tip shape: 3.97 or less pointed centreTool material: High speed steelCutting edge shape: StraightMaterial: General steel / Stainless steel / Cast iron / Aluminium / CopperMaterial details: Steel alloy, compatibleStem type: Straight shankMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 20 Straight Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 10 ～ 110 - Straight - - - KonfigureraOrdinarie pris (exklusive MOMS):31.67 €～Ordinarie avsändningsdatum:6 arbetsdagar
EIKOSHA
Carbide Solid Reamer Shank-Through Coolant CSGR-DLC
[Features]· Exhibits excellent weld resistance with aluminum, non-ferrous metal, etc.· Thin film that does not impair machinability.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 12 End Mill Shank Aluminum[○] / Copper[○] 19 ～ 25 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):234.91 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
OKAZAKI SEIKO
[Features]・ For hole finishing machining of cast iron and general steel・ MCO material (cobalt HSS) is usedMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 2 End Mill Shank General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] 30 N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):43.18 €～Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
MAKOTOLOY
Full Cut Solid Carbide Reamers MRS
[Features]· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.51 ～ 10 - General Steel[○] / Cast Iron[○] / Aluminum[○] 15 ～ 40 - Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):49.36 €～Ordinarie avsändningsdatum:8 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 15.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 48 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holesMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 5.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 34 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 5.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 34 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot holeMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 15.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 48 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holesMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 5.995 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 34 N/A Straight Available - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
- Volume Discount
MISUMI
Straight Reamer with Carbide Bottom Blade
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 10.01 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 27 ～ 40 N/A Straight Available - - KonfigureraOrdinarie pris (exklusive MOMS):54.96 €～Ordinarie avsändningsdatum:5 arbetsdagar
MISUMI
Carbide Straight Reamer, Long Model
[Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 5.99 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 0.5 ～ 34 N/A Straight N/A - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
- Volume Discount
MISUMI
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
[Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 10 End Mill Shank General Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 12 ～ 40 Available ～ N/A Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):35.08 €～Ordinarie avsändningsdatum:5 arbetsdagar
MISUMI
Carbide Pilot Hole Correction Boring Bit
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.Mer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1.8 ～ 5 End Mill Shank General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] - N/A Straight N/A - - KonfigureraOrdinarie avsändningsdatum:8 arbetsdagar
MISUMI
Carbide Step Reamer, Custom Dimensions / Long Shank Type
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possibleMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - End Mill Shank General Steel[◎] / Aluminum[◎] - N/A Straight - - - KonfigureraOrdinarie avsändningsdatum:7 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
EIKOSHA
The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface RoughnessMer informationTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.8 ～ 12.05 End Mill Shank General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] 12 ～ 45 Available Straight N/A - - KonfigureraOrdinarie pris (exklusive MOMS):65.29 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag