Filtreringsvillkor

Rensa alla

  • Lager
  • Tool Diameter(mm)
    [1.8-5/0.1mm units]
    [0.3-15.99/0.01mm units]
    [0.3-15.995/0.005mm units]
  • Groove Length(mm)
    [0.5-48/0.5mm units]
    [3-10/1mm units]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers (3 sida)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • 1 / 10" Taper Spiral Taper Reamer for Finishing SPTR-F

        EIKOSHA

        1 / 10" Taper Spiral Taper Reamer for Finishing SPTR-F

        Morse Taper Shank for 1/10 Taper Holes (for Finish)
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        -Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]60 ~ 100N/ASpiralN/A10.5 ~ 2516 ~ 34.5
        Ordinarie pris (exklusive MOMS):
        246.71 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide Reamer B Series
        • Volume Discount

        FPTOOLS

        Carbide Reamer B Series

        [Features] It is possible to drill holes of general steel highly polished, and it is possible to drill without subsequent pilot hole.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.9 ~ 14Straight ShankGeneral Steel[○] / Resin[○] / Alloy Steel[○]20 ~ 70N/AStraightN/A--
        Ordinarie pris (exklusive MOMS):
        49.50 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide Reamer C Series
        • Volume Discount

        FPTOOLS

        Carbide Reamer C Series

        [Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.91 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 25N/AStraightN/A--
        Ordinarie pris (exklusive MOMS):
        45.21 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide Reamer CE Series (Formerly SH Series)
        • Volume Discount

        FPTOOLS

        Carbide Reamer CE Series (Formerly SH Series)

        Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 14.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 30AvailableSpiralAvailable--
        Ordinarie pris (exklusive MOMS):
        99.95 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide Reamer R Series
        • Volume Discount

        FPTOOLS

        Carbide Reamer R Series

        Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 12.1End Mill ShankQuenched and tempered steel[◎]15 ~ 65AvailableSpiralN/A--
        Ordinarie pris (exklusive MOMS):
        77.20 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • F.P. Gold Reamer Spiral Blade
        • KAMPANJFÖRSÄLJNING
        • Volume Discount

        FPTOOLS

        F.P. Gold Reamer Spiral Blade

        [Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 14.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 85AvailableSpiralN/A--
        Ordinarie pris (exklusive MOMS):
        38.50 €
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • High Helical Reamer
        • Volume Discount

        FPTOOLS

        High Helical Reamer

        Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        6.5Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]35N/ASpiralN/A--
        Ordinarie pris (exklusive MOMS):
        49.66 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Straight Shank Chucking Reamer
        • Volume Discount

        FPTOOLS

        Straight Shank Chucking Reamer

        [Features] -The reamer expands the hole as the workpiece rotates during cutting.
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 50N/AStraightN/A--
        Ordinarie pris (exklusive MOMS):
        98.40 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Spiral Machine Reamer SPMR

          EIKOSHA

          Spiral Machine Reamer SPMR

          A spiral machine reamer. [Features] · Morse taper shank is adopted for machine use. · Adopts a torsion blade with excellent cutting powder discharge. [Applications] · For general purpose finishing.
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 60Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 190N/ASpiralN/A--
          Ordinarie pris (exklusive MOMS):
          102.44 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • High Helical Reamer HHHR
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          EIKOSHA

          High Helical Reamer HHHR

          High-speed steel high-torsion spiral reamer.[Features]· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.· Reduces cutting resistance.[Applications]· Convenient for general purpose finishing.
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2.1 ~ 16.05End Mill Shank / Straight ShankQuenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○]15 ~ 45N/AHelicalN/A--
          Ordinarie pris (exklusive MOMS):
          42.03 €
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Handle Reamer HR
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          EIKOSHA

          Handle Reamer HR

          General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.56 ~ 28End Mill Shank / Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12 ~ 140N/AStraightN/A--
          Ordinarie pris (exklusive MOMS):
          28.09 €
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Toglon® Hard Reamer ALT Coating

            IWATA TOOL

            Toglon® Hard Reamer ALT Coating

            [Features]· HRC40-72 hardened steel can be machined.· 4-flute
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            3 ~ 12End Mill ShankHigh Hardness Steel[○]40 ~ 70AvailableSpiralN/A--
            Ordinarie pris (exklusive MOMS):
            79.43 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Handle Reamer

              TRUSCO NAKAYAMA

              Handle Reamer

              [Characteristics] Has a gentle chamfer angle and four-cornered shank section, precisely finishing drilled holes or holes through which a rough ream has been put through. Although originally for hand-finishing, it can also be used for machine finishing at the final stage. [Application] Work Materials: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1.8 ~ 5Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
              Ordinarie pris (exklusive MOMS):
              33.64 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • Long Handle Reamer
              • KAMPANJFÖRSÄLJNING

              TRUSCO NAKAYAMA

              Long Handle Reamer

              [Characteristics] Has a gentle chamfer angle and four-cornered shank section, precisely finishing drilled holes or holes through which a rough ream has been put through. Although originally for hand-finishing, it can also be used for machine finishing at the final stage. Suitable for deep groove machining. [Application] Work Materials: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 16Taper shankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
              Ordinarie pris (exklusive MOMS):
              112.35 €
              Ordinarie pris (exklusive MOMS):
              Specialpris
              Ordinarie avsändningsdatum:
              Lagervara: 1 arbetsdag
              Vissa artiklar kan skickas samma dag
              Konfigurera
            • BR Bridge Reamer
              • KAMPANJFÖRSÄLJNING
              • Volume Discount

              OKAZAKI SEIKO

              BR Bridge Reamer

              Used for large reamer allowances. Uses MCo material (cobalt high speed steel).
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              14 ~ 32Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]110 ~ 190N/AStraightN/A10 ~ 26-
              Ordinarie pris (exklusive MOMS):
              101.84 €
              Ordinarie pris (exklusive MOMS):
              Specialpris
              Ordinarie avsändningsdatum:
              Lagervara: 1 arbetsdag
              Vissa artiklar kan skickas samma dag
              Konfigurera
            • BCER Reamer with Carbide Teeth (Straight Shank)

                OKAZAKI SEIKO

                BCER Reamer with Carbide Teeth (Straight Shank)

                Tip brazing type, straight shank specification. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                Mer information
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/ASpiralAvailable--
                Ordinarie pris (exklusive MOMS):
                137.30 €
                Ordinarie avsändningsdatum:
                10 arbetsdagar
                Konfigurera
              • BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                  OKAZAKI SEIKO

                  BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                  Tip brazing type, Morse taper shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  12.5 ~ 30Morse Taper ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                  Ordinarie pris (exklusive MOMS):
                  137.30 €
                  Ordinarie avsändningsdatum:
                  10 arbetsdagar
                  Konfigurera
                • BCHR Carbide Helical Reamer (Straight Shank)

                    OKAZAKI SEIKO

                    BCHR Carbide Helical Reamer (Straight Shank)

                    Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling. The shape is left-torsion to provide excellent stability for machining of holes with notches (key grooves, etc.).
                    Mer information
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AHelicalN/A--
                    Ordinarie pris (exklusive MOMS):
                    124.74 €
                    Ordinarie avsändningsdatum:
                    8 arbetsdagar
                    Konfigurera
                  • CCR Carbide Chucking Reamer
                    • Volume Discount

                    OKAZAKI SEIKO

                    CCR Carbide Chucking Reamer

                    A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                    Mer information
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                    Ordinarie pris (exklusive MOMS):
                    35.79 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • CCRM Carbide Chucking Reamer (Hundredths Range)
                    • Volume Discount

                    OKAZAKI SEIKO

                    CCRM Carbide Chucking Reamer (Hundredths Range)

                    A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                    Mer information
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    2.95 ~ 12.05Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                    Ordinarie pris (exklusive MOMS):
                    37.91 €
                    Ordinarie avsändningsdatum:
                    10 arbetsdagar
                    Konfigurera
                  • With Carbide Teeth (and with Oil Hole)

                      OKAZAKI SEIKO

                      With Carbide Teeth (and with Oil Hole)

                      A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      5 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                      Ordinarie pris (exklusive MOMS):
                      116.61 €
                      Ordinarie avsändningsdatum:
                      10 arbetsdagar
                      Konfigurera
                    • CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                        OKAZAKI SEIKO

                        CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                        A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                        Mer information
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        4.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                        Ordinarie pris (exklusive MOMS):
                        135.08 €
                        Ordinarie avsändningsdatum:
                        10 arbetsdagar
                        Konfigurera
                      • CERM Reamer with Carbide Teeth (Hundredths Range)

                          OKAZAKI SEIKO

                          CERM Reamer with Carbide Teeth (Hundredths Range)

                          A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                          Ordinarie pris (exklusive MOMS):
                          112.18 €
                          Ordinarie avsändningsdatum:
                          10 arbetsdagar
                          Konfigurera
                        • CERS Short Reamer with Carbide Teeth
                          • Volume Discount

                          OKAZAKI SEIKO

                          CERS Short Reamer with Carbide Teeth

                          A solid type. Carbide end blade reamer (CER/CERM) short type.
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 6End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]6 ~ 12N/ASpiralAvailable--
                          Ordinarie pris (exklusive MOMS):
                          30.79 €
                          Ordinarie avsändningsdatum:
                          8 arbetsdagar
                          Konfigurera
                        • CHRS Short Carbide Helical Reamer
                          • Volume Discount

                          OKAZAKI SEIKO

                          CHRS Short Carbide Helical Reamer

                          A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]35N/AHelicalN/A--
                          Ordinarie pris (exklusive MOMS):
                          117.21 €
                          Ordinarie avsändningsdatum:
                          10 arbetsdagar
                          Konfigurera
                        • CHRSM Short Carbide Helical Reamer (Hundredths Range)
                          • Volume Discount

                          OKAZAKI SEIKO

                          CHRSM Short Carbide Helical Reamer (Hundredths Range)

                          A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]22 ~ 35N/AHelicalN/A--
                          Ordinarie pris (exklusive MOMS):
                          33.68 €
                          Ordinarie avsändningsdatum:
                          7 arbetsdagar
                          Konfigurera
                        • CR Chucking Reamer (Straight Shank)
                          • Volume Discount

                          OKAZAKI SEIKO

                          CR Chucking Reamer (Straight Shank)

                          Short blade type. A straight shank. Uses MCo material (cobalt high speed steel).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          6Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]30N/AStraightN/A--
                          Ordinarie pris (exklusive MOMS):
                          66.45 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
                          • KAMPANJFÖRSÄLJNING
                          • Volume Discount

                          OKAZAKI SEIKO

                          CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)

                          A solid type. Ideal dimensions added (0 to 0.005 dimensional tolerance). 0.005 mm increments added (exact dimensions ±0.03).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.99 ~ 7.44Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]12 ~ 35N/AStraightN/A--
                          Ordinarie pris (exklusive MOMS):
                          25.39 €
                          Ordinarie pris (exklusive MOMS):
                          Specialpris
                          Ordinarie avsändningsdatum:
                          Lagervara: 1 arbetsdag
                          Vissa artiklar kan skickas samma dag
                          Konfigurera
                        • MR Machine Reamer
                          • Volume Discount

                          OKAZAKI SEIKO

                          MR Machine Reamer

                          A wide variety of shank sizes are available. Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 80Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]35 ~ 260N/AStraightN/A--
                          Ordinarie pris (exklusive MOMS):
                          80.21 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • SPHR Spiral Flute Hand Reamer
                          • Volume Discount

                          OKAZAKI SEIKO

                          SPHR Spiral Flute Hand Reamer

                          Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]40 ~ 150N/ASpiralN/A--
                          Ordinarie pris (exklusive MOMS):
                          38.97 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • SPMR Spiral Flute Machine Reamer
                          • Volume Discount

                          OKAZAKI SEIKO

                          SPMR Spiral Flute Machine Reamer

                          Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 50Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]35 ~ 180N/ASpiralN/A--
                          Ordinarie pris (exklusive MOMS):
                          98.18 €
                          Ordinarie avsändningsdatum:
                          10 arbetsdagar
                          Konfigurera
                        • SSR Speed Reamer (Straight Shank)
                          • Volume Discount

                          OKAZAKI SEIKO

                          SSR Speed Reamer (Straight Shank)

                          Capable of high-speed rotation and high feeding. Special surface processing. Uses MCo material (cobalt high speed steel).
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          13Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50N/ASpiralN/A--
                          Ordinarie pris (exklusive MOMS):
                          68.57 €
                          Ordinarie avsändningsdatum:
                          7 arbetsdagar
                          Konfigurera
                        • SSRT Speed Reamer (Morse Taper Shank)

                            OKAZAKI SEIKO

                            SSRT Speed Reamer (Morse Taper Shank)

                            Capable of high-speed rotation and high feeding. Special surface processing. Uses MCo material (cobalt high speed steel).
                            Mer information
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            10 ~ 50Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]45 ~ 105N/ASpiralN/A--
                            Ordinarie pris (exklusive MOMS):
                            101.84 €
                            Ordinarie avsändningsdatum:
                            10 arbetsdagar
                            Konfigurera
                          • NC Sensor Reamer (Straight Shank)

                              NIKKEN KOSAKUSHO

                              NC Sensor Reamer (Straight Shank)

                              [It has excellent surface roughness and durability and is TiN coated.
                              Mer information
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              2.97 ~ 50-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                              Ordinarie pris (exklusive MOMS):
                              128.07 €
                              Ordinarie avsändningsdatum:
                              6 arbetsdagar
                              Konfigurera
                            • NC Sensor Reamer (Morse Taper Shank)

                                NIKKEN KOSAKUSHO

                                NC Sensor Reamer (Morse Taper Shank)

                                [Features] The surface is very rough and durable and coated with TiN.
                                Mer information
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                3 ~ 50-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                Ordinarie pris (exklusive MOMS):
                                118.12 €
                                Ordinarie avsändningsdatum:
                                6 arbetsdagar
                                Konfigurera
                              • Tough Cut Skill Reamer (Straight Shank)
                                • Volume Discount

                                NIKKEN KOSAKUSHO

                                Tough Cut Skill Reamer (Straight Shank)

                                Supports work materials such as hard-to-cut materials, die steel, tempered steel and more
                                Mer information
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                2.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                                Ordinarie pris (exklusive MOMS):
                                104.39 €
                                Ordinarie avsändningsdatum:
                                6 arbetsdagar
                                Konfigurera
                              • Tough Cut Skill Reamer (Morse Taper Shank)

                                  NIKKEN KOSAKUSHO

                                  Tough Cut Skill Reamer (Morse Taper Shank)

                                  Supports work materials such as hard-to-cut materials, die steel, tempered steel and more
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  3 ~ 60-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                                  Ordinarie pris (exklusive MOMS):
                                  121.21 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera
                                • Broach Reamer (Straight Shank)
                                  • Volume Discount

                                  NIKKEN KOSAKUSHO

                                  Broach Reamer (Straight Shank)

                                  Equipped with high precision and heavy machinability, capable of machining at a speed almost equivalent to that of drilling
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  1/8 ~ 30-General Steel[○] / Cast Iron[○] / Alloy Steel[○]-N/A----
                                  Ordinarie pris (exklusive MOMS):
                                  35.96 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera
                                • Broach Reamer Long
                                  • Volume Discount

                                  NIKKEN KOSAKUSHO

                                  Broach Reamer Long

                                  Equipped with high precision and heavy machinability, capable of machining at a speed almost equivalent to that of drilling
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  3 ~ 14-General Steel[○] / Cast Iron[○] / Alloy Steel[○]-N/A----
                                  Ordinarie pris (exklusive MOMS):
                                  87.75 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera
                                • Mill Reamer (Straight Shank)

                                    NIKKEN KOSAKUSHO

                                    Mill Reamer (Straight Shank)

                                    Excellent for machining non-ferrous materials and cast iron
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    2.95 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                                    Ordinarie pris (exklusive MOMS):
                                    135.29 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Mill Reamer (Morse Taper Shank)

                                      NIKKEN KOSAKUSHO

                                      Mill Reamer (Morse Taper Shank)

                                      [Features] Enables high-speed cutting and high efficiency and uses carbide materials with high hardness.
                                      Mer information
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      3 ~ 50-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                                      Ordinarie pris (exklusive MOMS):
                                      133.49 €
                                      Ordinarie avsändningsdatum:
                                      6 arbetsdagar
                                      Konfigurera
                                    • Right Lead Radical Mill Reamer

                                        NIKKEN KOSAKUSHO

                                        Right Lead Radical Mill Reamer

                                        [Features] It uses tungsten carbide material with high hardness and is coated with TiCN2.
                                        Mer information
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        2.97 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                        Ordinarie pris (exklusive MOMS):
                                        303.44 €
                                        Ordinarie avsändningsdatum:
                                        6 arbetsdagar
                                        Konfigurera
                                      • Right Lead Radical Mill Reamer (with Oil Wheel)

                                          NIKKEN KOSAKUSHO

                                          Right Lead Radical Mill Reamer (with Oil Wheel)

                                          Right pitch for blind holes.The right spiral angle and oil hole forcibly evacuate chips.
                                          Mer information
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          6 ~ 14-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                          Ordinarie pris (exklusive MOMS):
                                          449.20 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • Lead for Blind Hole, NC Sensor Reamer (Straight Shank)
                                          • Volume Discount

                                          NIKKEN KOSAKUSHO

                                          Lead for Blind Hole, NC Sensor Reamer (Straight Shank)

                                          [Features] It can be used for machining full blind holes. [Features] It has a TiN coating.
                                          Mer information
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          2.97 ~ 20-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                          Ordinarie pris (exklusive MOMS):
                                          143.65 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • Lead for Blind Hole, Tough Cut Skill (with Oil Wheel)
                                          • Volume Discount

                                          NIKKEN KOSAKUSHO

                                          Lead for Blind Hole, Tough Cut Skill (with Oil Wheel)

                                          The right-hand spiral angle and the oil hole ensure optimum chip removal.It has an oil hole.
                                          Mer information
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          6 ~ 14-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                                          Ordinarie pris (exklusive MOMS):
                                          260.72 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera