Filtreringsvillkor

Rensa alla

  • Lager
  • Tool Diameter(mm)
    [1.8-5/0.1mm units]
    [0.3-15.99/0.01mm units]
    [0.3-15.995/0.005mm units]
  • Groove Length(mm)
    [0.5-48/0.5mm units]
    [3-10/1mm units]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers (4 sida)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Lead for Blind Hole, Tough Cut Skill (Straight Shank)
      • Volume Discount

      NIKKEN KOSAKUSHO

      Lead for Blind Hole, Tough Cut Skill (Straight Shank)

      [Features] It can be used for machining blind holes. [Features] Special powdered high-speed steel is used and treated with ionic nitrogen.
      Mer information
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      2.97 ~ 30-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
      Ordinarie pris (exklusive MOMS):
      126.26 €
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Lead for Blind Hole, Mill Reamer (Straight Shank)
      • Volume Discount

      NIKKEN KOSAKUSHO

      Lead for Blind Hole, Mill Reamer (Straight Shank)

      [Features] Provides high speed cutting and high efficiency and uses high hardness carbide materials.
      Mer information
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      2.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
      Ordinarie pris (exklusive MOMS):
      166.04 €
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Lead for Blind Hole, Ultra-Hard Radical Mill Reamer (DLC Coating)
      • Volume Discount

      NIKKEN KOSAKUSHO

      Lead for Blind Hole, Ultra-Hard Radical Mill Reamer (DLC Coating)

      The right lead for complete blind holes allows the chips to be discharged smoothly. Has a DLC coating ideal for reaming non-ferrous metals such as aluminum
      Mer information
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      2.97 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
      Ordinarie pris (exklusive MOMS):
      367.61 €
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Carbide PF Radical Mill Reamer (with Straight Shank)

        NIKKEN KOSAKUSHO

        Carbide PF Radical Mill Reamer (with Straight Shank)

        Achieves high-speed and high-precision reaming. Long service life with aqueous cutting fluid processing
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.97 ~ 30-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
        Ordinarie pris (exklusive MOMS):
        136.20 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide PF Radical Reamer (with Straight Shank)
        • Volume Discount

        NIKKEN KOSAKUSHO

        Carbide PF Radical Reamer (with Straight Shank)

        Achieves high-speed and high-precision reaming. Long service life with aqueous cutting fluid processing
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.5 ~ 20.05-General Steel[◎] / Stainless Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
        Ordinarie pris (exklusive MOMS):
        132.37 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Carbide Broach Reamer (Straight Shank)

          NIKKEN KOSAKUSHO

          Carbide Broach Reamer (Straight Shank)

          Broach reamer for machining aluminum or cast iron. Maintains clean surface roughness
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1.94 ~ 14.05-General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Alloy Steel[○]-N/A----
          Ordinarie pris (exklusive MOMS):
          108.11 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Carbide Broach Reamer (Morse Taper Shank)

            NIKKEN KOSAKUSHO

            Carbide Broach Reamer (Morse Taper Shank)

            Broach reamer for machining aluminum or cast iron. Maintains clean surface roughness
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            5.1 ~ 55-General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Alloy Steel[○]-N/A----
            Ordinarie pris (exklusive MOMS):
            123.99 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Mini Reamer DLC Coating
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Mini Reamer DLC Coating

            Straight shank allows free length adjustment.DLC-coated design with low friction coefficient and high coating hardness, therefore ideal for machining cast metals and non-steel alloys.
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            2.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-Available----
            Ordinarie pris (exklusive MOMS):
            176.98 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Mini Reamer DLC Coating for Blind Holes
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Mini Reamer DLC Coating for Blind Holes

            Milling reamer for machining blind holes.DLC-coated design with low coefficient of friction and high coating hardness, therefore ideal for machining cast metals and non-steel alloys.
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            3.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-Available----
            Ordinarie pris (exklusive MOMS):
            258.34 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Radical Mini Reamer (DLC Coating)
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Radical Mini Reamer (DLC Coating)

            A DLC coated type with an end blade for high precision and high speed cutting.Spiral groove shape: Spiral/Spiral/Brake.
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            2.97 ~ 30-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
            Ordinarie pris (exklusive MOMS):
            204.22 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Radical Mini Reamer (Long Type)
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Radical Mini Reamer (Long Type)

            [Features] It uses carbide material with high hardness and is coated with TiCN2.
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            4.3 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
            Ordinarie pris (exklusive MOMS):
            183.88 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Radical Mini Reamer, Long for Blind Holes
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Radical Mini Reamer, Long for Blind Holes

            [Features] High hardness carbide is used and coated with TiCN2.
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            4.3 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
            Ordinarie pris (exklusive MOMS):
            265.58 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Radical Reamer Shell Head
            • Volume Discount

            NIKKEN KOSAKUSHO

            Carbide Radical Reamer Shell Head

            A highly accurate and economical slip-on head.Cutting edge shape: spiral/spiral/browSpiral angle (°): Left spiral angle 45
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            7.8 ~ 30-General Steel[◎] / Stainless Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]-AvailableSpiral---
            Ordinarie pris (exklusive MOMS):
            235.06 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Carbide Radical Reamer, Long

              NIKKEN KOSAKUSHO

              Carbide Radical Reamer, Long

              A long carbide radial reamer for deep hole drilling.Cutting edge shape: spiral/spiral/breaksSpiral angle (°): Left spiral angle 45
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              4.3 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
              Ordinarie pris (exklusive MOMS):
              140.94 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • Carbide Right Reamer DLC Coating
              • Volume Discount

              NIKKEN KOSAKUSHO

              Carbide Right Reamer DLC Coating

              The right-hand spiral angle discharges chips evenly.DLC-coated.Cutting edge shape: spiral/spiral/brakeSpiral angle (°): right-hand spiral angle 30 to 40.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              2.97 ~ 14.05-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-Available----
              Ordinarie pris (exklusive MOMS):
              250.54 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • NC Sensor Reamer for Bottom Hollow Applications (Straight Shank)
              • Volume Discount

              NIKKEN KOSAKUSHO

              NC Sensor Reamer for Bottom Hollow Applications (Straight Shank)

              [Features] It has excellent surface finish and durability and is TiN coated.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              2.97 ~ 40-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
              Ordinarie pris (exklusive MOMS):
              124.44 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • Tough Cut Skill Reamer for Bottom Hollow Applications (Straight Shank)

                NIKKEN KOSAKUSHO

                Tough Cut Skill Reamer for Bottom Hollow Applications (Straight Shank)

                [Features] It can be used for machining bottomed holes. [Features] It uses a special high-speed steel made of powder metal treated with ionic nitrogen.
                Mer information
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                2.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                Ordinarie pris (exklusive MOMS):
                118.61 €
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • Tough Cut Skill Reamer for Bottom Hollow Applications (Morse Taper Shank)

                  NIKKEN KOSAKUSHO

                  Tough Cut Skill Reamer for Bottom Hollow Applications (Morse Taper Shank)

                  [Features] It can be used for machining holes with bottoms. [Features] A special high-speed powder steel treated with nitrogen is used.
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  4 ~ 60-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                  Ordinarie pris (exklusive MOMS):
                  128.07 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Mill Reamer for Bottom Hollow Applications (Straight Shank)
                  • Volume Discount

                  NIKKEN KOSAKUSHO

                  Mill Reamer for Bottom Hollow Applications (Straight Shank)

                  [Features] Realises high-speed cutting and high efficiency, and uses carbide materials with high hardness.
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  3.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                  Ordinarie pris (exklusive MOMS):
                  171.45 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Mill Reamer for Bottom Hollow Applications (Morse Taper Shank)
                  • Volume Discount

                  NIKKEN KOSAKUSHO

                  Mill Reamer for Bottom Hollow Applications (Morse Taper Shank)

                  Ideal for machining non-ferrous materials and cast ironIt also enables efficient machining of the bottom surfaceSpiral shape: spiral/spiral/brakeSpiral angle (°): left-hand spiral angle 30
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  6 ~ 40-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                  Ordinarie pris (exklusive MOMS):
                  204.00 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide Radical Mini Reamer for Bottom Hollow Applications (DLC Coating)
                  • Volume Discount

                  NIKKEN KOSAKUSHO

                  Carbide Radical Mini Reamer for Bottom Hollow Applications (DLC Coating)

                  [Features]· Focused on high-precision and high-speed cutting.· With end blade, DLC coated type
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  3.97 ~ 30-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                  Ordinarie pris (exklusive MOMS):
                  261.63 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • For Carbide SV Reamer H7
                  • Volume Discount

                  OMIKOGYO

                  For Carbide SV Reamer H7

                  For more precise, more efficient operation.
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  3 ~ 6End Mill ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Alloy Steel[○]28 ~ 43AvailableSpiralN/A--
                  Ordinarie pris (exklusive MOMS):
                  125.21 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Solid Reamer for Aluminum, for Through Holes HR500 Alu D 1679

                    GUHRING

                    Solid Reamer for Aluminum, for Through Holes HR500 Alu D 1679

                    [Features]· High-quality hole finish-machining can be performed at ultra high speed.· Reamer dedicated for aluminum, ideal for aluminum and aluminum alloy.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                    Mer information
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    4 ~ 20--12 ~ 25Available----
                    Ordinarie pris (exklusive MOMS):
                    379.63 €
                    Ordinarie avsändningsdatum:
                    24 arbetsdagar
                    Konfigurera
                  • Solid Reamer for Aluminum, for Blind Holes HR500 Alu S 1678

                      GUHRING

                      Solid Reamer for Aluminum, for Blind Holes HR500 Alu S 1678

                      [Features]· High-quality hole finish-machining can be performed at ultra high speed.· Reamer dedicated for aluminum, ideal for aluminum and aluminum alloy.· Lubricates internally using the center-through hole, allowing reliable extraction of cutting chips.
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      4 ~ 20--12 ~ 25Available----
                      Ordinarie pris (exklusive MOMS):
                      379.63 €
                      Ordinarie avsändningsdatum:
                      24 arbetsdagar
                      Konfigurera
                    • Solid Reamer for Through Holes HR500D 1676

                        GUHRING

                        Solid Reamer for Through Holes HR500D 1676

                        [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                        Mer information
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        2.97 ~ 12.03--12 ~ 19Available----
                        Ordinarie pris (exklusive MOMS):
                        283.59 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Solid Reamer for Through Holes HR500D 1686

                          GUHRING

                          Solid Reamer for Through Holes HR500D 1686

                          [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 20--12 ~ 25Available----
                          Ordinarie pris (exklusive MOMS):
                          238.89 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • Solid Reamer for Blind Holes HR500S 1685

                            GUHRING

                            Solid Reamer for Blind Holes HR500S 1685

                            [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Lubricates internally using the center-through hole, helping achieve reliable extraction of cutting chips.
                            Mer information
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            3 ~ 20--12 ~ 25Available----
                            Ordinarie pris (exklusive MOMS):
                            238.89 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • Reamer with Blades for Through-Hole HR500GD 1681

                              GUHRING

                              Reamer with Blades for Through-Hole HR500GD 1681

                              [Features]· Cemented carbide blade type reamer ideal for machining work materials other than cast iron, copper, stainless steel, and aluminum.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                              Mer information
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              22 ~ 40--22 ~ 25Available----
                              Ordinarie pris (exklusive MOMS):
                              612.71 €
                              Ordinarie avsändningsdatum:
                              8 arbetsdagar
                              Konfigurera
                            • Reamer with Blades for Through-Hole HR500GD 1683

                                GUHRING

                                Reamer with Blades for Through-Hole HR500GD 1683

                                [Features]· Ideal for machining steel using reamers with cermet blades.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                                Mer information
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                22 ~ 40--22 ~ 25N/A----
                                Ordinarie pris (exklusive MOMS):
                                665.13 €
                                Ordinarie avsändningsdatum:
                                8 arbetsdagar
                                Konfigurera
                              • Reamer 830 Head

                                  SANDVIK

                                  Reamer 830 Head

                                  Unique shape exhibits high performance
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  10 ~ 30End Mill ShankGeneral Steel[○] / Cast Iron[○] / Die Steel[○]-N/ASpiralN/A--
                                  Ordinarie pris (exklusive MOMS):
                                  555.10 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera
                                • Reamer with End Blades ERR-TiN

                                    EIKOSHA

                                    Reamer with End Blades ERR-TiN

                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    2.95 ~ 50End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30AvailableSpiralAvailable--
                                    Ordinarie pris (exklusive MOMS):
                                    100.47 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Spiral Taper Pin Reamer
                                    • Volume Discount

                                    EIKOSHA

                                    Spiral Taper Pin Reamer

                                    Screw Type for 1/48 and 1/50 Taper Pins Reduces Cutting Resistance
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]48 ~ 318N/ASpiralN/A1.9 ~ 29.72.86 ~ 36.06
                                    Ordinarie pris (exklusive MOMS):
                                    42.83 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Solid Spiral Chucking Reamer CSSPSCR
                                    • Volume Discount

                                    EIKOSHA

                                    Solid Spiral Chucking Reamer CSSPSCR

                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    3 ~ 10End Mill ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]30 ~ 35N/ASpiralN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    98.15 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Solid Helical Reamer CSHR
                                    • Volume Discount

                                    EIKOSHA

                                    Solid Helical Reamer CSHR

                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    1 ~ 10Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 40N/AHelicalN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    52.61 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Solid Carbide Reamer CSRH-P
                                    • Volume Discount

                                    EIKOSHA

                                    Solid Carbide Reamer CSRH-P

                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    2.95 ~ 12.05End Mill ShankHigh Hardness Steel[◎]40 ~ 65AvailableSpiralN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    63.38 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • Pipe Reamer PR
                                    • Volume Discount

                                    EIKOSHA

                                    Pipe Reamer PR

                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]19 ~ 45N/AStraightN/A8.025 ~ 54.849.213 ~ 57.653
                                    Ordinarie pris (exklusive MOMS):
                                    95.63 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • High Helical Reamer (Tapered Shank) HHHRT

                                      EIKOSHA

                                      High Helical Reamer (Tapered Shank) HHHRT

                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      10 ~ 14Taper shankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]40 ~ 45N/AHelicalN/A--
                                      Ordinarie pris (exklusive MOMS):
                                      82.30 €
                                      Ordinarie avsändningsdatum:
                                      6 arbetsdagar
                                      Konfigurera
                                    • Pin Gate Reamer (End Mill Shank)
                                      • KAMPANJFÖRSÄLJNING

                                      EIKOSHA

                                      Pin Gate Reamer (End Mill Shank)

                                      Pinpoint gate hole finishing of mold.
                                      Mer information
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      -End Mill ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]25 ~ 150N/ASpiralAvailable-1.43 ~ 15.3
                                      Ordinarie pris (exklusive MOMS):
                                      117.20 €
                                      Ordinarie pris (exklusive MOMS):
                                      Specialpris
                                      Ordinarie avsändningsdatum:
                                      Lagervara: 1 arbetsdag
                                      Vissa artiklar kan skickas samma dag
                                      Konfigurera
                                    • Long High Helical Reamer

                                        EIKOSHA

                                        Long High Helical Reamer

                                        Strong torsion type, Reducing the cutting resistance
                                        Mer information
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        3 ~ 10Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]24 ~ 60N/AHelicalN/A--
                                        Ordinarie pris (exklusive MOMS):
                                        87.43 €
                                        Ordinarie avsändningsdatum:
                                        6 arbetsdagar
                                        Konfigurera
                                      • Long High Helical Reamer (Tapered Shank) HHHRTL

                                          EIKOSHA

                                          Long High Helical Reamer (Tapered Shank) HHHRTL

                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          8 ~ 30Taper shankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]40 ~ 75N/AHelicalN/A--
                                          Ordinarie pris (exklusive MOMS):
                                          102.11 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • Semicircular Spool Reamer SURH

                                            EIKOSHA

                                            Semicircular Spool Reamer SURH

                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            -End Mill ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]60 ~ 160N/AStraightN/A1 ~ 52.04 ~ 32.99
                                            Ordinarie pris (exklusive MOMS):
                                            110.37 €
                                            Ordinarie avsändningsdatum:
                                            6 arbetsdagar
                                            Konfigurera
                                          • Carbide Spiral Reamer KSHR-4

                                              KYOWA SEIKO

                                              Carbide Spiral Reamer KSHR-4

                                              Lineup of bits for small diameter hole finish machining from φ0.5 to φ2.03 in 0.01 increments.
                                              Mer information
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              2.03End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-N/ASpiral---
                                              Ordinarie pris (exklusive MOMS):
                                              65.39 €
                                              Ordinarie avsändningsdatum:
                                              8 arbetsdagar
                                              Konfigurera
                                            • Carbide Reamer with End Blade Edge KHR-4

                                                KYOWA SEIKO

                                                Carbide Reamer with End Blade Edge KHR-4

                                                [Features] It can be used for cutting general steel, heat treated steel, stainless steel, cast iron, aluminium, titanium, copper and resin. [Features] It uses K10 fine grain alloy with balanced hardness and transverse fracture resistance.
                                                Mer information
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                1 ~ 6.03End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-N/ASpiralAvailable--
                                                Ordinarie pris (exklusive MOMS):
                                                109.96 €
                                                Ordinarie avsändningsdatum:
                                                6 arbetsdagar
                                                Konfigurera
                                              • Carbide Reamer with End Blade Edge KHRA-4

                                                  KYOWA SEIKO

                                                  Carbide Reamer with End Blade Edge KHRA-4

                                                  [Features] It can be used to cut general steel, heat treated steel, stainless steel, cast iron, aluminium, titanium, copper and resin. [Features] There are 3 blade shapes: spiral, helical and broach.
                                                  Mer information
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  1 ~ 6.03End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-AvailableSpiralAvailable--
                                                  Ordinarie pris (exklusive MOMS):
                                                  105.52 €
                                                  Ordinarie avsändningsdatum:
                                                  8 arbetsdagar
                                                  Konfigurera
                                                • Spiral Blade Long Machine Reamer SP-LMR (SKH51)

                                                    TAIYO-TOOL

                                                    Spiral Blade Long Machine Reamer SP-LMR (SKH51)

                                                    [Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Spiral[Base Blade Y/N] N
                                                    Mer information
                                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                    1/2 ~ 35Morse Taper Shank-120 ~ 400N/ASpiralN/A--
                                                    Ordinarie pris (exklusive MOMS):
                                                    277.36 €
                                                    Ordinarie avsändningsdatum:
                                                    6 arbetsdagar
                                                    Konfigurera