MISUMIS START
Machining tools
Chamfering / Centering Tools
Replaceable Blade Type Chamfering Tools/Tips/Blades
Coating Type:TiN

Kategori

Filtreringsvillkor

Rensa alla

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
Tip angle (θ)
- 45
- 60
- 90
- 120
Tool Diameter (D)(mm)
- 0.45～2.1
- 0.45～2.7
- 0.65～2.1
- 0.65～2.7
- 2–10
- 3~14
work material
- General Steel
- Quenched and tempered steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Single blade, two blades
- Single blade
Peripheral Blade Y/N
- N/A
Tool Material Type
- High-speed steel
- Carbide
Coating Y/N
- Available
Coating Type
- TiN
R Size (R)(mm)
- 0.2
- 0.4
- 0.8
Tillverkare

Replaceable Blade Type Chamfering Tools/Tips/Blades (Coating Type: TiN)

Spare blade type chamfering tools / tips / blades are cutting tools such as blades, inserts, blades, etc. used for chamfering and their parts. Chamfering is a process that removes burrs by cutting sharp parts of metal, and is essential for making safe products with high accuracy. The main products are replaceable blades such as spot drills, chamfer cutters, counter sinks, etc. With spot drills, there is a type that can perform drill hole positioning and chamfering at one time. The chamfering cutter can be used for chamfering the edges of square objects. The feature of the counter sink is that it can be chamfered easily on a drill press. Each blade can be replaced, eliminating the need for regrinding, resulting in lower costs and higher work reproducibility.

19 poster

* Information om dagar till leverans, fraktkostnader och priser

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

Spot Drill Insert

NINE9

Spot Drill Insert

Insert for NC spot drill holders.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	90	2–10 ～ 3~14	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Resin[○]	Single blade	N/A	Carbide	Available	TiN

Ordinarie pris (exklusive MOMS):

52.26 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Insert for Engraving Cutter

NINE9

Insert for Engraving Cutter

The special insert design realizes an ultra-long operating life.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Engraved	45 ～ 60	0.45～2.1 ～ 0.65～2.7	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	Available	TiN

Ordinarie pris (exklusive MOMS):

59.23 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Tips for Chibimomi C22GUX

FUJIGEN

Tips for Chibimomi C22GUX

An insert for Chibimomi that can be used for centring and chamfering.[Features]Used for centring holes, chamfering countersinks and chamfering edges.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	-	-	-	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

31.98 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Tips for Decamomi T32GUX

FUJIGEN

Tips for Decamomi T32GUX

Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	-	-	-	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

38.89 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Tip for Momimen / All C32GUX

FUJIGEN

Tip for Momimen / All C32GUX

Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

35.71 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Tip for 60° Momimen D43GUX

FUJIGEN

Tip for 60° Momimen D43GUX

An indexable insert for 60° momimen that can be used for centering and chamfering.[Features]Used for centering holes, chamfering countersinks and chamfering edges.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	-	-	General Steel[○] / Cast Iron[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

51.34 €

Ordinarie avsändningsdatum:

7 arbetsdagar

Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

FUJIGEN

Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

Inserts for chamfer cutters / R Cindo cutters / Baitenders.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal / Round Chamfer	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

21.66 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

FUJIGEN

Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal / Round Chamfer	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

29.69 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Tip for Ryanmen Cut / V T22MOR

FUJIGEN

Tip for Ryanmen Cut / V T22MOR

One K10 grade carbide insert for Ryanmencut-V.[Features]For chamfering the back and surface.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

23.16 €

Ordinarie avsändningsdatum:

6 arbetsdagar

S32MOZ Chip S32GUR

FUJIGEN

S32MOZ Chip S32GUR

S-type precision insert for face machining.[Features]Used for face milling and chamfering.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal / Round Chamfer	-	-	Stainless Steel[○] / Aluminum[○] / Resin[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

22.32 €

Ordinarie avsändningsdatum:

9 arbetsdagar

FUJIGEN
N-Type N43GUR Tip
This is an N-type insert that can be used for face milling.[Features]Used for face milling and chamfering.
Mer information
Application Tip angle (θ) Tool Diameter (D)(mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type
Round Chamfer - - - - - - Available TiN
Ordinarie pris (exklusive MOMS):
33.50 €
Ordinarie avsändningsdatum:
9 arbetsdagar
Konfigurera
FUJIGEN
N-Type N43MOZ Tip
An insert that can perform chamfering.Compatible models: Nice-Corner VR[features]Used for face milling and chamfering.
Mer information
Application Tip angle (θ) Tool Diameter (D)(mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type
Round Chamfer - - - - - - Available TiN
Ordinarie pris (exklusive MOMS):
21.76 €
Ordinarie avsändningsdatum:
9 arbetsdagar
Konfigurera

T-Type T33MOZ Tip

FUJIGEN

T-Type T33MOZ Tip

A T-type carbide insert that can perform shoulder machining.Compatible models: New Nice Cut / Skat Cut[Features]It is used for shoulder machining.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

24.17 €

Ordinarie avsändningsdatum:

9 arbetsdagar

T-Type T33MOR Tip

FUJIGEN

T-Type T33MOR Tip

[Features] Materials: Cermet, carbide grade K10, carbide grade M20Number of corners used: 6

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

21.76 €

Ordinarie avsändningsdatum:

9 arbetsdagar

T-Type T33GUR Tip

FUJIGEN

T-Type T33GUR Tip

[Features] Materials: Cermet, carbide grade K10, carbide grade M20Cutting edge shape: Ground edge, sharp edge.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	Stainless Steel[○] / Aluminum[○] / Resin[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

27.20 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Shuririn C32GUR Tip

FUJIGEN

Shuririn C32GUR Tip

[Features] -For Shurillin (C32GUR)Materials: Cemented carbide grade K10, Cemented carbide grade M20Cutting edge form: Ground edge, sharp edge

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	Available	TiN

Ordinarie pris (exklusive MOMS):

28.62 €

Ordinarie avsändningsdatum:

9 arbetsdagar

FUJIGEN
Maru Chan Tip
[Features] -For Maru-chanMaterials: Carbide grade K10, CermetCutting edge shape: Sharp edge, ground edgeNumber of corners used: 360° double-sided.
Mer information
Application Tip angle (θ) Tool Diameter (D)(mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type
- - - - - - - Available TiN
Ordinarie pris (exklusive MOMS):
15.87 €
Ordinarie avsändningsdatum:
8 arbetsdagar
Konfigurera

Center Boy

BIG KAISER

Accurately positions the drill hole and chamfers at the same time. High-precision throw-away bits with outstanding cutting sharpness. Eliminates the need for bit grinding. Long shank reduces interference with the workpiece.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90 ～ 120	-	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	N/A	High-speed steel	Available	TiN

Ordinarie pris (exklusive MOMS):

106.00 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

High Speed Coating for Center Boy Throwaway Bit

BIG KAISER

High Speed Coating for Center Boy Throwaway Bit【5 stycken】

[Features]· Shows outstanding sharpness as it has a cutting edge with precision finishing.· Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.

Mer information

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90	-	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	N/A	High-speed steel	Available	TiN

Ordinarie pris (exklusive MOMS):

109.37 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Nyligen visade produkter

SUMIKO TEC
CL07 Series Accessories (Waterproof Packing)

Kategorier som hör till Replaceable Blade Type Chamfering Tools/Tips/Blades