Level Gauges
Levels are tools for measuring levelness and perpendicularity with the ground, and they include bubble levels. They are used mainly in locations where surveying is necessary, such as building construction sites and piping and electrical construction sites. Shapes include traditional angled type as well as round type with which measurements can be made in all directions, so a type that fits the location to measure and the application needs to be selected. Materials they are made of are acrylic or aluminum. There are digital types with more accurate display than bubble levels as well as levels with convenient functions such as laser beam and tape measure. There are also types with multiple bubble levels and scales attached to measure angles too, types with magnets incorporated in the main body to attach to the location to measure, and more.
5 poster
* Information om dagar till leverans, fraktkostnader och priser
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Screw-on levels GN 2282 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.Mer informationLength(mm) Diameter(mm) 57 - KonfigureraOrdinarie pris (exklusive MOMS):14.38 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Bull´s eye levels GN 2280 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.The mounting threads offset by 120° allow the spirit levels to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.Mer informationLength(mm) Diameter(mm) - 17 ～ 24 KonfigureraOrdinarie pris (exklusive MOMS):15.32 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
KonfigureraOrdinarie pris (exklusive MOMS):50.76 €～Ordinarie avsändningsdatum:7 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Due to their cylindrical design, bull´s eye levels GN 2281 are suitable for installation in plates and housings where they serve to check the horizontal position of jigs, machines and devices.Bull´s eye levels are not aligned, i.e. there is no reference to the external outline of the level. The vertical position must be ensured by aligning the holding building element.The black housing of the version ALS creates a reflection at the edge of the bubble which significantly improves the readability. Version KT is available with contrast ring inside the air level housing(Identification no. 2) which creates the same effect.Alternatively, the contrast can also be improved by a dark surface inside the mounting bore hole.Mer informationLength(mm) Diameter(mm) - 10 ～ 18 KonfigureraOrdinarie pris (exklusive MOMS):2.08 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
KonfigureraOrdinarie pris (exklusive MOMS):56.32 €～Ordinarie avsändningsdatum:7 arbetsdagar