Magnet Blocks
Magnetic blocks are a tool used to hold a workpiece with a magnet during measurement and processing. They have a switching lever that can be attached/detached, and have a drip-proof and oil-resistant structure enabling the use even in liquid. Some of them can be used with the handle either fixed or removed. The shape of the magnetic block is rectangle, V-shaped or square. Since the magnetism is on the top, side, bottom, etc., depending on the product, please make sure it suits the application before use. The magnetic block is used as holders for deep machining such as making grooves and steps and light machining such as scribing and tapping as well as used for fixing measured objects of coordinate measuring machines and measuring systems, etc. There is no magnetism in the chuck block, and it is placed on top of a magnetic chuck for magnetic induction and attracts the workpiece.
14 poster
* Information om dagar till leverans, fraktkostnader och priser
KANETEC
KMV Type Magnetic Block【2 stycken】
· Top side (V side) and end face are absorptive surfaces.· Switch lever is removable. (Hexagon opposite side is 8 mm)· Drip-proof and oil-resistant structure.· A 2-piece set.· Special grade precision finishing is also available. Contact us in advance.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) V Type Magnet block 150 N (15 kgf) or more Upper Surface 40 70 50 KonfigureraOrdinarie pris (exklusive MOMS):634.99 €Ordinarie avsändningsdatum:6 arbetsdagar
KANETEC
Handle can be either fixed or detached.[Features]· Upper surface (V surface)/tip surface can be adsorbed.· Switching lever is removable.· (Hexagonal subtense: 8 mm) Has a drip-proof, oil-resistant structure.· 1 set of 2 pieces.· Premium grade precision finishing is also supported.· Consult us in advance.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block 200 (20 kgf) or More ～ 230 (23 kgf) or More Upper Surface / Rear / V Surface 50 100 ～ 150 80 ～ 100 KonfigureraOrdinarie pris (exklusive MOMS):973.70 €～Ordinarie avsändningsdatum:6 arbetsdagar
KANETEC
Permanent Magnetic Mini-Chuck with Four Suction Surfaces
[Features]· Unique utility type mini chuck that can adsorb on all 4 faces.· Relay absorption on the workpiece machine tool bed is possible, as is simultaneous adsorption of top and side faces.· Can also be used as a guide stopper for fixing the workpiece.· Accuracy is flatness: 0.01 mm, parallelism: 0.02 mm, perpendicular angle: 0.03 mm.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Permanent magnet mini-chuck 2nd Surface after Total Adsorption of 1st Surface: 400/3rd Surface after Total Adsorption of 4th Surface :60 Upper Surface / Both sides / Bottom - - - KonfigureraOrdinarie pris (exklusive MOMS):2,671.65 €Ordinarie avsändningsdatum:8 arbetsdagar
KANETEC
[Features]· Since workpieces alone can be detached and replaced without changing the fixed position of the holder, work can be done efficiently.· ON/OFF switching lever is removable. (Hex socket subtense is 8 mm).· Drip-proof and oil resistant construction.· Premium grade precision finishing is also supported.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block 300 (30 kgf) or More ～ 700 (70 kgf) or more Upper Surface / Bottom / Rear / V Surface - - - KonfigureraOrdinarie pris (exklusive MOMS):287.77 €～Ordinarie avsändningsdatum:6 arbetsdagar
KANETEC
Permanent Magnet Mini V Block【2 stycken】
[Features]· Two units in one pair. Precision finishing for the suction surface and all other used surfaces.· Can be turned on and off by rotating 90° with a screwdriver, etc. on the back surface.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block 9.8(1kgf) V Surface - - - KonfigureraOrdinarie pris (exklusive MOMS):907.80 €Ordinarie avsändningsdatum:6 arbetsdagar
MISUMI
[Features]Non-magnetic chuck block.By using it together with magnetic base and magnetic chuck, and by selecting the size that matches a workpiece and whether or not it has a V-groove, the workpiece can be held in close contact.[Application]It is ideal for attracting workpieces with shapes that are difficult to attract using only the chuck work surface.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Permanent magnet mini-chuck - - - - - KonfigureraOrdinarie pris (exklusive MOMS):104.21 €～Ordinarie avsändningsdatum:5 arbetsdagar
MISUMI
[Features]Magnetic V-block holder with ON-OFF switching function.Double sides of the V shape and the bottom of the base are attracting surfaces.[Application]Ideal as a holder during processing and testing.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - - 588 ～ 784 - - - - KonfigureraOrdinarie pris (exklusive MOMS):72.11 €～Ordinarie avsändningsdatum:6 arbetsdagar
KANETEC
[Features]· It is possible for the attachment surface to be cut to a depth of 10 mm from the surface or less at shipping.· By inserting the workpiece in the grooves, large processing pressure can be handled.· Retention of adhesion-resistant carbide materials is possible, as is application to grinding.· Can be used for chucking with a magnet chuck.· Available in types that allow the magnetic force to be turned on/off and types that cannot switch.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block 400 ～ 750 - 60 ～ 100 120 ～ 230 50 ～ 100 KonfigureraOrdinarie pris (exklusive MOMS):966.85 €～Ordinarie avsändningsdatum:13 arbetsdagar
KANETEC
V Type Chuck Block (Non-Magnetic Electromagnetic Induction Type)【2 stycken】
[Features]· Since there is no magnetism in the product itself, it is placed on the magnetic chuck to induce magnetism and attract the workpiece.· Magnetism can be induced in either the top/side surfaces or the V/side surfaces.· Even specially shaped workpieces can be easily dealt with by preparing a chuck block, fully utilizing existing chucks.· A set of 2 pieces finished simultaneously (KT-3 and 4 sold individually)Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block - Both sides / V Surface - - - KonfigureraOrdinarie pris (exklusive MOMS):369.49 €Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
KANETEC
Square Shaped Block (KYA Type)
Block Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) Grid Magnet block V-Groove (1): 120 / V-Groove (2) :100 ～ V-Groove (1): 200 / V-Groove (2) :120 Upper Surface / Both sides / V Surface - - - KonfigureraOrdinarie pris (exklusive MOMS):1,239.92 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
KANETEC
Double Sided Suction V Type Holder
[Features]· Since workpieces alone can be detached and replaced without changing the fixed position of the holder, work can be done efficiently.· ON/OFF switching lever is removable.· (Hexagonal subtense: 8 mm) Has a drip-proof, oil-resistant structure.· Premium grade precision finishing is also supported.· Consult us in advance.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) - Magnet block 392 (40 kgf) or More Upper Surface / Both sides / Bottom / Rear / V Surface 60 80 105 KonfigureraOrdinarie pris (exklusive MOMS):987.80 €Ordinarie avsändningsdatum:7 arbetsdagar
- Volume Discount
TECHNOPLAN
Simple Holder For Welding CPH-WP
[Features]· A simple magnetic-attraction based holder designed specifically for keeping costs down.· Used at welding worksites on ships and on bridges.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) Rectangular Magnet block 980 Bottom 66 50 44 KonfigureraOrdinarie pris (exklusive MOMS):53.10 €Ordinarie avsändningsdatum:14 arbetsdagar
- Volume Discount
TECHNOPLAN
[Applications]· Used for marking and light machining as well as for electrical discharge or for holding work during wire cutting.· Can also be used as a holder for 3-dimensional measuring devices and other types of measurement system. [Features]· Can be adhered on three surfaces—the upper surface (V surface) and both side surfaces.· Can be easily switched on and off using the handle.Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) Grid Magnet block 245 Upper Surface / Both sides 100 100 100 KonfigureraOrdinarie pris (exklusive MOMS):988.98 €Ordinarie avsändningsdatum:23 arbetsdagar
TECHNOPLAN
V-Type Magnetic Holder CVH / CVS
[Applications]· Used for making holes, tapping, electric discharge or for holding work when cutting irregular-shaped objects during wire cutting tasks.· Can also be used as a holder for 3-dimensional measuring devices and other types of measurement system. [Features]· A lever type for easily switching the magnetism ON or OFF.· Three adsorption surfaces; top, bottom and back (partial.)Mer informationBlock Shape Product Type Magnet Attraction Force(N) Suction Surface Width(mm) Depth(mm) Height(mm) V Type Magnet block 686 Bottom / Rear 100 ～ 200 70 ～ 75 95 ～ 100 KonfigureraOrdinarie pris (exklusive MOMS):275.21 €～Ordinarie avsändningsdatum:8 arbetsdagar