Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Product Type
  • Brush Long(mm)
  • Outer Diameter(mm)
  • Wire diameter(mm)
  • Shaft Diameter(mm)
  • Tillverkare

    • Brushes with Shafts (Product Type: Spiral brush)

    Shaft-mounted brushes are tools with a shaft that are mounted on electric tools and used for polishing, deburring, paint removal, and the like. They are used when polishing a work surface by hand. There are various brush tips, such as spiral brush, flat type brush, end brush, cup brush, and flower brush. Brush materials like wavy iron and brass are for deburring and rust removal, and stainless steel and the like is for polishing. There are many types of brush materials, which must be selected according to the application the brush is used for. It is most effective if the bristle tips of a brush with the shaft is pressed against the workpiece, so it is appropriate to cut the bristles to about 1 to 2 mm. Also, the tools that they can be attached to differ by shank diameter, so caution must be taken when using.
      19 poster
      * Information om dagar till leverans, fraktkostnader och priser
      Lista
      Foto
      Jämför specifikationer
    • 1
      • Miniature Spiral Brush
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Miniature Spiral Brush

        This spiral brush can be attached to the tip of an electric or compressed air cleaner to achieve miniature precision abrasion.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-2 ～ 100.11.1 ～ 4
        Ordinarie pris (exklusive MOMS):
        21.38 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Spiral Hole Brush, U Type
        • Volume Discount

        MINITOR

        Spiral Hole Brush, U Type

        [Features]· Enables work with the tip while reducing damage to the abutting surface. Results in less damage to the abutting surface compared to typical spiral hole brushes. [Applications]· Compatible materials: Tool steel, alloy steel, resins, rubber, general steel, stainless steel, aluminum, copper
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush408 ～ 160.2 ～ 0.456
        Ordinarie pris (exklusive MOMS):
        34.20 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Micro-Spiral Brush, Abrasive-Containing Nylon
        • Volume Discount

        MISUMI

        Micro-Spiral Brush, Abrasive-Containing Nylon

        The micro spiral brush is an extremely flexible elastic tool that enables deburring, polishing and edge finishing according to the shape of the part. It is also capable of deburring impossible with conventional deburring tools such as intersecting holes with complicated shapes and stepped drill holes, and providing uniform finish.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush252.70.33
        Ordinarie pris (exklusive MOMS):
        56.58 €
        Ordinarie avsändningsdatum:
        5 arbetsdagar
        Konfigurera
      • Micro Spiral Brush (Nylon with Polishing Material)
        • Volume Discount

        BURRTEC

        Micro Spiral Brush (Nylon with Polishing Material)

        Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush20 ～ 301 ～ 5.5-3
        Ordinarie pris (exklusive MOMS):
        47.95 €～
        Ordinarie avsändningsdatum:
        8 arbetsdagar
        Konfigurera
      • Bar Twister Stainless Steel
        • Volume Discount

        BURRTEC

        Bar Twister Stainless Steel

        Pipe type which supports automation. Achieves significant labor saving. Ideal for deburring cylinder inner surfaces, screw holes, pipe inner surfaces, cross holes, or curved surfaces.[Features]· Supports automatic operation and is available for instant delivery.· A very useful deep hole deburring brush.· Auto: A pipe type which supports automatic operation. Achieves significant labor saving.· Long: Total length 150 mm / 6φ to 14φ, total length 200 mm / 16φ to 24φ, usable for deep holes that previously could not be reached with standard products.· Speedy: Standardized products enable instant delivery, without waiting.· Material: Four types of brush materials that support various uses are available. (Nylon with abrasive particles, stainless steel, brass, nylon)
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush50101.026
        Ordinarie pris (exklusive MOMS):
        20.71 €
        Ordinarie avsändningsdatum:
        9 arbetsdagar
        Konfigurera
      • Micro Spiral Brush (Brass)
        • Volume Discount

        BURRTEC

        Micro Spiral Brush (Brass)

        Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush20 ～ 301.27 ～ 5.50.06 ～ 0.13
        Ordinarie pris (exklusive MOMS):
        59.45 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Micro Spiral Brush (Stainless Steel)
        • Volume Discount

        BURRTEC

        Micro Spiral Brush (Stainless Steel)

        Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush20 ～ 501 ～ 81.023 ～ 6
        Ordinarie pris (exklusive MOMS):
        60.41 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • "Inside Brush" (Shaft Diameter: 3 mm)
        • Volume Discount

        NAKANISHI

        "Inside Brush" (Shaft Diameter: 3 mm)

        [Applications]· Ideal for deburring cylinder inner surfaces, screw holes, pipe inner surfaces, cross holes, or curved surfaces.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush12 ～ 451.7 ～ 190.1 ～ 0.551.6 ～ 6
        Ordinarie pris (exklusive MOMS):
        27.25 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Miniature Steel Wire Spiral Brush
        • KAMPANJFÖRSÄLJNING
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Miniature Steel Wire Spiral Brush

        This spiral brush can be attached to the tip of an electric or compressed air cleaner to perform miniature precision abrasion.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-2 ～ 100.11.1 ～ 4
        Ordinarie pris (exklusive MOMS):
        19.81 €～
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • Miniature Stainless Steel Spiral Brush
        • KAMPANJFÖRSÄLJNING
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Miniature Stainless Steel Spiral Brush

        This spiral brush can be attached to the tip of an electric or compressed air cleaner to achieve miniature precision abrasion.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-2 ～ 100.081.1 ～ 4
        Ordinarie pris (exklusive MOMS):
        16.85 €～
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • Miniature Grit Spiral Brush with Abrasive
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Miniature Grit Spiral Brush with Abrasive

        This spiral brush can be attached to the tip of an electric or pneumatic cleaner to perform a miniature precision rubbing.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-2 ～ 10-1.1 ～ 4
        Ordinarie pris (exklusive MOMS):
        22.95 €
        Ordinarie avsändningsdatum:
        10 arbetsdagar
        Konfigurera
      • Chimney Pipe Cleaning Brush with Screw Thread
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Chimney Pipe Cleaning Brush with Screw Thread

        This threaded brush can be attached to a head of an electric or pneumatic cleaner to clean chimney pipes.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-75 ～ 1500.35
        Ordinarie pris (exklusive MOMS):
        6.55 €～
        Ordinarie avsändningsdatum:
        10 arbetsdagar
        Konfigurera
      • Miniature Nylon Spiral Brush
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Miniature Nylon Spiral Brush

        This spiral brush can be attached to the tip of an electric or pneumatic hoover to provide miniature precision abrasion.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-2 ～ 100.171.1 ～ 4
        Ordinarie pris (exklusive MOMS):
        21.38 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Full Stainless Steel Spiral Brush
        • Volume Discount

        SUN POWER(TAIYO SHOKAI)

        Full Stainless Steel Spiral Brush

        This spiral brush can be attached to the tip of an electric or pneumatic hoover to achieve miniature precision abrasion.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush-1 ～ 6.50.051 ～ 0.080.4 ～ 2.6
        Ordinarie pris (exklusive MOMS):
        19.79 €～
        Ordinarie avsändningsdatum:
        10 arbetsdagar
        Konfigurera
      • Micro Brush, Stainless Steel Wire
        • Volume Discount

        LESSMANN

        Micro Brush, Stainless Steel Wire

        [Features] · Wire brush for manual work. · Uses high quality wire material for excellent durability and long life. [Applications] · For deburring work on tubes, pipes, etc.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush25--3.8
        Ordinarie pris (exklusive MOMS):
        24.74 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Micro Brush, Abrasive Nylon Wire
        • Volume Discount

        LESSMANN

        Micro Brush, Abrasive Nylon Wire

        [Features] · Wire brush for manual work. · Uses high quality wire material for excellent durability and long life. [Applications] · For deburring work on tubes, pipes, etc.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush18 ～ 65--0.7 ～ 5.7
        Ordinarie pris (exklusive MOMS):
        24.93 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Double Stainless Spiral Brush
        • Volume Discount

        YANASE

        Double Stainless Spiral Brush

        [Features]· Double spiral brush made of stainless steel.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush5015 ～ 500.12 ～ 0.156
        Ordinarie pris (exklusive MOMS):
        31.76 €～
        Ordinarie avsändningsdatum:
        35 arbetsdagar
        Konfigurera
      • W Roll Condenser Brush Unilon Grit
        • Volume Discount

        YANASE

        W Roll Condenser Brush Unilon Grit

        [Features]· Unilon Grit twisted brush.· For grinding and polishing pipes and inner surfaces.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush5013 ～ 32-6
        Ordinarie pris (exklusive MOMS):
        27.58 €～
        Ordinarie avsändningsdatum:
        30 arbetsdagar
        Konfigurera
      • Inside Brush, Shaft Diameter ⌀6.0
        • Volume Discount

        NAKANISHI

        Inside Brush, Shaft Diameter ⌀6.0

        [Features]· A specially made brush in which various brush materials are spirally fixed using metal core wire.· Enables finishing of parts that are not supported by normal brushes, such as the inside of a cylinder, the inner surface of a screw hole and the inner diameter of a pipe.· Suitable for polishing, deburring, cleaning and rust and scale removal.
        Mer information
        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Spiral brush45⌀6 ～ ⌀250.15 ～ 0.55⌀6.0
        Ordinarie pris (exklusive MOMS):
        27.02 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
    • 1

      • Kategorier som hör till Brushes with Shafts