Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Product Type
  • Tillverkare

    • Polishing Materials for Grinders (Product Type: Flap Wheel)

    Abrasives for grinders are abrasives that are applied to a hand grinder for deburring welding burrs and rust removal. Grinder abrasives include those used for steel deburring and rust removal, and abrasives used for paint removal that do not easily scratch the base material. Therefore, choose a grinder abrasive according to the polishing work. However, not all grinder abrasives can be used with all grinders, and the method of application varies depending on the grinder used, so it is important to check the method of application before purchasing. Grinder abrasive clogging may occur depending on the material to be polished, so compatibility with the material to be polished is also important when selecting an abrasive.
      5 poster
      * Information om dagar till leverans, fraktkostnader och priser
      Lista
      Foto
      Jämför specifikationer
    • 1
      • GP Sander Paper® (Direct Screw-In Type)
        • KAMPANJFÖRSÄLJNING
        • Volume Discount

        TRUSCO NAKAYAMA

        GP Sander Paper® (Direct Screw-In Type)【5 stycken】

        [Features] For standard metals. It is elastic and can be used as disk paper (plane use) or as flap wheel (side use). Slight spacing between polishing cloths prevents clogging and allows to use to the end. Perfect fit to curved surfaces. A direct screwing type. Polishing material for professional use with individually hand-inserted and calked blades. [Applications] For removing paint or polishing before plating. Ideal for polishing stainless steel, iron, alloys, woods, plastics, etc. Tools used: disc grinders and straight grinders.
        Mer information
        Product Type
        Flap Wheel
        Ordinarie pris (exklusive MOMS):
        71.71 €～
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • GP Sander Sisal (Direct Screw-In Type)
        • Volume Discount

        TRUSCO NAKAYAMA

        GP Sander Sisal (Direct Screw-In Type)【5 stycken】

        [Features] The combination of sisal (hemp) and cotton provides sharp edge and beautiful polishing. Use for intermediate or rough polishing of steels, stainless steel, aluminum, etc. with grease-based abrasives. Suitable for paper smoothing before mirror surface finishing. By using a 6 mm shaft adapter, it can be used also with a flexible sander. Using the sides, the next step is facilitated by making the polishing marks straight. Attach it by directly screwing to the shaft of the disc grinder. [Applications] For rough / intermediate polishing of steels, stainless steel, aluminum, etc.
        Mer information
        Product Type
        Flap Wheel
        Ordinarie pris (exklusive MOMS):
        118.62 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • GP Sander Nylon® (Direct Screw-In Type)
        • KAMPANJFÖRSÄLJNING
        • Volume Discount

        TRUSCO NAKAYAMA

        GP Sander Nylon® (Direct Screw-In Type)【5 stycken】

        [Features] - For use for stainless steel or general metals. It can polish on 3 surfaces - the top, bottom and side surfaces. Entangled nylon abrasive, which has cushioning properties and does not scrape too much the polished material is used for the surface finishing. In addition, beautiful hairline processing is possible by using the straight lines on the sides. - Attach it by directly screwing to the shaft of the disc grinder. [Applications] - R of the sealer sanding of round parts, stainless steel, aluminum hairline processing, woodwork, finishing before painting, pre-treatment for mirror surface processing for satin finishing. - Tools used: disc grinders and straight grinders.
        Mer information
        Product Type
        Flap Wheel
        Ordinarie pris (exklusive MOMS):
        79.82 €～
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • SKO Light Flap S A (Double Headed Grinder-Use)
        • Volume Discount

        ICHIGUCHI

        SKO Light Flap S A (Double Headed Grinder-Use)

        Flexible nonwoven abrasive material can polish any irregular surface beautifully. Ideal for deburring of small parts made of aluminum, brass, or stainless steel, oxide coating removal, removal of polishing scratches, and finishing. Attach to a double-headed grinder to use.[Features]· Nonwoven fabric abrasive material has been constructed for use with a double-headed grinder.· For rough to fine finishing.· Old paint removal.· Used for polishing and deburring small components.· Cleaning before welding.· Removal of oxide film or rust.· For removing the nap of wood.· For removing burns from stainless steel, etc. after welding.· Blurs out scratches on aluminum products.· Roughening before applying paint coats, laminate, etc.· For cleaning printed circuit boards
        Mer information
        Product Type
        Flap Wheel
        Ordinarie pris (exklusive MOMS):
        61.76 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Unilon Flap
        • Volume Discount

        YANASE

        Unilon Flap

        [Applications]· For hairline finishing, finish polishing, and oxide film removal.· For surface finishing, deburring and satin finish.
        Mer information
        Product Type
        Flap Wheel
        Ordinarie pris (exklusive MOMS):
        118.73 €
        Ordinarie avsändningsdatum:
        35 arbetsdagar
        Konfigurera
    • 1

      • Kategorier som hör till Polishing Materials for Grinders