GANTER Set Collars / Clamping Rings
Narrow search by specifying Tightening Method
-
Set Screw -
Slit -
Split -
Hinged -
Wedge -
One-Touch -
Surface Pressure
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Set collars / steel / galvanised / double grub screw / similar to DIN 705 / GN 705
GANTER
Set collars GN 705 essentially comply with the designs of DIN 705 which has been re-issued in April 2007.
The official standard sheet also lists the sizes d1 = 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 85 / 90 / 100 / 110 / 120 / 125 / 125 / 140 / 150 / 160 / 180 and 200, although it does not show a whole series of the intermediate sizes listed in the above table.
Also, the official standard sheet still lists the Types B and C for fixing the set collars with transverse pin, but not Type E.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / aluminium / quick release / GN 704
GANTER
The force lock with the shaft is made in the GN 704 quick release set collars via an eccentric lever which allows the collars to be adjusted easily and quickly without tools. The aluminium design delivers low inertia values.
The specified tightening torque of the screw is a recommended value with which the collar clamped to a shaft (with closed eccentric lever) is capable of reaching the specified axial load capacity. The details on axial load capacity are non-binding guidance values and do not constitute a warranty of characteristics.
Keeping the friction surface of the eccentric lever slightly greased will help to prolong the useful service life.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 53.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel / double grub screw / similar to DIN 705 / GN 705
GANTER
Stainless Steel-Set collars GN 705 essentially comply with the designs of DIN 705 which has been re-issued in April 2007.
The official standard sheet also lists the sizes d1 = 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 85 / 90 / 100 / 110 / 120 / 125 / 125 / 140 / 150 / 160 / 180 and 200, although it does not show a whole series of the intermediate sizes listed in the above table.
Also, the official standard sheet still lists the Types B and C for fixing the set collars with transverse pin, but not Type E.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel / slotted / GN 706.2
GANTER
Semi-split set collars GN 706.2 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / steel / double grub screw / similar to DIN 705 / GN 705
GANTER
Set collars GN 705 essentially comply with the designs of DIN 705 which has been re-issued in April 2007.
The official standard sheet also lists the sizes d1 = 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 85 / 90 / 100 / 110 / 120 / 125 / 125 / 140 / 150 / 160 / 180 and 200, although it does not show a whole series of the intermediate sizes listed in the above table.
Also, the official standard sheet still lists the Types B and C for fixing the set collars with transverse pin, but not Type E.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / shape selectable / GN 7072.1
GANTER
With extension-tapped holes of the split Stainless Steel-Set collars GN 7072.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 36.14 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / aluminium, steel / two-piece / GN 707.2
GANTER
Split set collars GN 707.2 are used when the latter cannot be slipped over a shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2
GANTER
With split Stainless Steel-Set collars GN 7072.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 33.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / aluminium, steel / slotted / clamping lever / GN 706.4
GANTER
Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 18.70 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / aluminium, steel / slotted / GN 706.2
GANTER
Semi-split set collars GN 706.2 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / damped / GN 7072.3
GANTER
The affixed dampening washer of the split Stainless Steel-Set collars GN 7072.3 absorbs mild shocks and has a sound-dampening effect when the set collars come into contact with other components.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 16.92 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / steel / slotted / internal thread / GN 706.3
GANTER
Threaded set collars GN 706.3 can be used in connection with bolt thread tolerance 6g. After clamping, the thread of the semi-split set collar may no longer be tolerance-stable (6H).
The thread d3 for sizes d1 = 20 to 36 is designed as a through hole, from size d1 = 42 it is designed as blind hole.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / slotted / damped / GN 7062.3
GANTER
The affixed dampening washer of the semi-split Stainless Steel-Set collars GN 7062.3 absorbs mild shocks and has a sound-dampening effect when the set collars come into contact with other components.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 13.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel / slotted / clamping lever / GN 706.4
GANTER
Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 26.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel / two-piece / GN 707.2
GANTER
Stainless Steel-Split set collars GN 707.2 are used when the latter cannot be slipped over a shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Holding discs for magnets / stainless steel / GN 70
GANTER
Stainless-Steel-Holding discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials.
They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.42 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / slotted / internal thread / GN 706.3
GANTER
Stainless Steel-threaded set collars GN 706.3 can be used in connection with bolt thread tolerance 6g. After clamping, the thread of the semi-split set collar may no longer be tolerance-stable (6H).
The thread d3 for sizes d1 = 20 to 36 is designed as a through hole, from size d1 = 42 it is designed as blind hole.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 14.98 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / shape selectable / GN 7062.3
GANTER
With extension-tapped holes of the semi-split Stainless Steel-Set collars GN 7062.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 29.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2
GANTER
With semi-split Stainless Steel-Set collars GN 7062.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Starting from∗ ： 27.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Tightening Method |
| RoHS Information |
| Specifications |
| Features, Areas of Application |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Surface Machining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Set collars / steel / galvanised / double grub screw / similar to DIN 705 / GN 705 | Set collars / stainless steel / double grub screw / similar to DIN 705 / GN 705 | Set collars / steel / double grub screw / similar to DIN 705 / GN 705 | Set collars / stainless steel / two-piece / shape selectable / GN 7072.1 | Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2 | Set collars / aluminium, steel / slotted / clamping lever / GN 706.4 | Set collars / stainless steel / two-piece / damped / GN 7072.3 | Set collars / stainless steel / slotted / damped / GN 7062.3 | Set collars / stainless steel / slotted / clamping lever / GN 706.4 | Set collars / stainless steel / slotted / internal thread / GN 706.3 | Set collars / stainless steel / shape selectable / GN 7062.3 | Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2 | |||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Starting from∗ | 0.90 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 53.60 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.20 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.72 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.68 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 36.14 € *Unit price with basic configuration Volume Discount | 7.70 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 33.36 € *Unit price with basic configuration Volume Discount | 18.70 € *Unit price with basic configuration Volume Discount | 5.58 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 16.92 € *Unit price with basic configuration Volume Discount | 13.06 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 13.90 € *Unit price with basic configuration Volume Discount | 26.16 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.92 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.42 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 14.98 € *Unit price with basic configuration Volume Discount | 29.82 € *Unit price with basic configuration Volume Discount | 27.50 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | 7 Days | Same day | 7 Days | 7 Days | Same day | 7 Days | Same day | 7 Days | Same day | Same day | Same day | 7 Days | 7 Days | 7 Days |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D.(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thickness | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Side Surface Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
RoHS Information
-
Specifications
-
Standard -
With Clamp Lever -
For Bearing Mounting -
With Urethane -
With Side Mounting Holes -
D Cut -
2-Flat -
Threaded Bore -
With Key Relief Groove
-
-
Features, Areas of Application
-
I.D.(mm)
- 3
- 4
- 5
- 6
- 6+0.05
- 6.35
- 7
- 7.938
- 8
- 8+0.07
- 9
- 9.525
- 10
- 10+0.07
- 10.5
- 11
- 11.113
- 12
- 12+0.07
- 12.7
- 13
- 13.8
- 14
- 15
- 15.875
- 16
- 16+0.07
- 17
- 17.3
- 18
- 19
- 19.05
- 20
- 20*
- 20+0.07
- 21
- 21.7
- 22
- 22.225
- 23
- 23.813
- 24
- 25
- 25+0.07
- 25.4
- 26
- 27
- 27.2
- 28
- 28.575
- 30
- 30+0.12
- 31.75
- 32
- 34
- 34.925
- 35
- 36
- 38
- 38.1
- 40
- 40+0.12
- 42
- 42.7
- 44.45
- 45
- 48
- 48.6
- 50
- 50+0.12
- 50.8
- 52
- 55
- 56
- 57.15
- 58
- 60
- 63
- 63.5
- 65
- 68
- 70
- 72
- 75
- 76.2
- 80
- 85
- 90
- 100
- 110
- 120
- 125
- 130
- 140
-
O.D.(mm)
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18*
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 43
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66
- 66.5
- 68
- 69
- 70
- 72
- 73
- 75
- 76
- 78
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 86
- 88
- 90
- 93
- 94
- 95
- 98
- 100
- 103
- 105
- 108
- 110
- 113
- 115
- 119
- 125
- 126
- 130
- 140
- 150
- 160
- 170
- 180
- 200
-
Width(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Resin
-
Surface Treatment
- No Surface Treatment
- Surface Treatment Provided
- Black Anodized
- Zinc Plating
-
Thickness
-
Side Surface Machining
Narrow search by specifying Brand
-
- MISUMI (38)
- ESCO (74)
- MAEDLER (66)
- IWATA MFG (55)
- GANTER (19)
- NORELEM (18)
- KIPP (15)
- KATAYAMA CHAIN (8)
- KONISHI MFG (6)
- KBK (4)
- ELESA (3)
- HALDER (3)
- REYHER (2)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Examples how you can use these components Test
Categories related to Set Collars / Clamping Rings
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.