GANTER Adjuster
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Machine feet, without central fastening hole
GANTER
[Specifications]
・Type (Foot plate): without rubber underlay, with rubber underlay, with O-ring
Machine feet GN 36 are characterized by their solid construction andlarge variety. Used especially on large and heavy systems and machines.- Volume Discount
Starting from∗ ： 23.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Levelling feet with vibration damping element / Natural rubber / Zinc plated / M10-M20 / GN 148
GANTER
[Specifications]
・Material: Natural rubber
・Surface treatment: Zinc plated
・Threaded insert: Steel, Zinc plated
・Thread d2: M10-M20
・Type: with two-hole flange, with four-bolt flangeI
・dentification no.: without tear-off lock, with tear-off lock
・Hardness: soft, hard
Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
The structure is such that horizontal forces are also absorbed.
The design with tear-off lock (identification no. 2) protects the leveling feet from destruction caused by tear-off under excessive tension loads.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Volume Discount
Starting from∗ ： 41.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Levelling Feet with Vibration Damping Element / GN 148 / with two-hole flange, with four-bolt flange
GANTER
Levelling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
The structure is such that horizontal forces are also absorbed.
The design with tear-off lock (Type 2) protects the levelling feet from destruction caused by tear-off under excessive tension loads.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 41.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Levelling feet rubber underlay, vulcanized
GANTER
[Specifications]
・Material: Steel
・Surface treatment: Zinc plated
・Color: Black
・Thread d2: M6-M10
・Length l: 30-70
・Hardness: Hardness Shore A
Leveling feet GN 439 / GN 439.5 are used for installing smaller machines, systems or devices.
Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface damage. They are also designed such that the threaded spindle can absorb compressive forces. This is necessary because the retaining washer is not evenly supported during leveling.
Thanks to the stable rivet connection between the threaded spindle and the retaining washer, the introduced forces can be reliably transmitted to the rubber underlay.- Volume Discount
Starting from∗ ： 5.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Levelling feet rubber underlay, vulcanized
GANTER
[Specifications]
・Material: Stainless Steel
・Color: Black
・Thread d2: M6-M10
・Length l: 30-70
・Hardness: Hardness Shore A
Leveling feet GN 439 / GN 439.5 are used for installing smaller machines, systems or devices.
Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface damage. They are also designed such that the threaded spindle can absorb compressive forces. This is necessary because the retaining washer is not evenly supported during leveling.
Thanks to the stable rivet connection between the threaded spindle and the retaining washer, the introduced forces can be reliably transmitted to the rubber underlay.- Volume Discount
Starting from∗ ： 5.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Spacer disks foot disks, rubber underlay, vulcanized
GANTER
[Specifications]
・Material: Stainless Steel
・Color: Black
・h: 3-5
・d2: 4, 5, 6
・Type: Mounting with fixing hole, Mounting with adhesive pad
・Hardness: Hardness Shore A
Spacer disks and foot disks GN 438 / GN 438.5 provide a damping and muffling function and protect surfaces from damage.
By stacking several spacer disks on each other, the spring rate of the package can be increased, which opens up new possibilities for use.
Foot discs are used for installing small machines, systems or devices and, for the type A, are attached with screws. Bear in mind the maximum height of the screw head. Alternatively, after the protective film has been removed, the type B can be adhered to all suitable and clean surfaces by means of the adhesive pad.- Volume Discount
Starting from∗ ： 1.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spacer disks foot disks, rubber underlay, vulcanized
GANTER
[Specifications]
・Material: Steel
・Surface treatment: Zinc plated
・Color: Black
・h: 3-5
・d2: 4, 5, 6
・Type: Mounting with fixing hole, Mounting with adhesive pad
・Hardness: Hardness Shore A
Spacer disks and foot disks GN 438 / GN 438.5 provide a damping and muffling function and protect surfaces from damage.
By stacking several spacer disks on each other, the spring rate of the package can be increased, which opens up new possibilities for use.
Foot discs are used for installing small machines, systems or devices and, for the type A, are attached with screws. Bear in mind the maximum height of the screw head. Alternatively, after the protective film has been removed, the type B can be adhered to all suitable and clean surfaces by means of the adhesive pad.- Volume Discount
Starting from∗ ： 1.70 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Foot plates, without central fastening hole
GANTER
[Specifications]
・Material: Steel
・Surface treatment: Powder coated
・Color: Black
・Type: without rubber underlay, with rubber underlay, with O-ring
・Foot diameter d1: 80-200
・Radius r: R20-R35
Foot plates GN 36.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines.
The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.- Volume Discount
Starting from∗ ： 13.10 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Foot plates, central fastening hole
GANTER
[Specifications]
・Material: Steel
・Surface treatment: Powder coated
・Color: Black
・Type: without rubber underlay, with rubber underlay, with O-ring
・Foot diameter d1: 80-200
・Radius r: R20-R35
Foot plates GN 37.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines. The through-hole allows the machine feet to be attached centrally to the ground, making them ideal for compressive and tensile loads.
The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.- Volume Discount
Starting from∗ ： 13.16 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Nominal M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Levelling feet with vibration damping element / Natural rubber / Zinc plated / M10-M20 / GN 148 | Levelling Feet with Vibration Damping Element / GN 148 / with two-hole flange, with four-bolt flange | Stainless Steel-Spacer disks foot disks, rubber underlay, vulcanized | ||||||
| CAD |
| ||||||||
| Starting from∗ | 23.96 € *Unit price with basic configuration Volume Discount | 41.82 € *Unit price with basic configuration Volume Discount | 41.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.12 € *Unit price with basic configuration Volume Discount | 5.66 € *Unit price with basic configuration Volume Discount | 1.86 € *Unit price with basic configuration Volume Discount | 1.70 € *Unit price with basic configuration Volume Discount | 13.10 € *Unit price with basic configuration Volume Discount | 13.16 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 7 Days | 7 Days | Same day | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days |
| Type | - | - | - | - | - | - | - | - | - |
| Adjusting Bolt Shape Type | - | - | - | - | - | - | - | - | - |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | - | - | - | - | - | - | - | - | - |
| Thread Material | - | - | - | - | - | - | - | - | - |
| Thread Surface Treatment | - | - | - | - | - | - | - | - | - |
| Body Material | - | - | - | - | - | - | - | - | - |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - |
| Bottom Rubber Material | - | - | - | - | - | - | - | - | - |
| Thread Length L1(mm) | - | - | - | - | - | - | - | - | - |
| Main Body Height h(mm) | - | - | - | - | - | - | - | - | - |
| Thread Nominal M(mm) | - | - | 10 ～ 20 | - | - | - | - | - | - |
| Properties | - | - | - | - | - | - | - | - | - |
| Swivel Mechanism | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Leg End
- Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 11.5
- 11.6
- 13.5
- 14
- 15
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 38.5
- 39.5
- 40
- 41
- 43
- 43.5
- 45
- 45.5
- 47
- 48.5
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 53
- 54
- 55
- 56
- 58
- 58.5
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 65
- 65.5
- 66
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 95
- 95.5
- 97
- 98
- 99
- 99.5
- 100
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
-
Main Body Height h(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 107
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
Thread Nominal M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Narrow search by specifying Brand
-
- MISUMI (18)
- NORELEM (50)
- NABEYA (50)
- MAEDLER (25)
- TAKIGEN (25)
- DAIWARASHI (24)
- KIPP (21)
- IMAO CORPORATION (21)
- ELESA (20)
- HALDER (10)
- GANTER (9)
- NABEYA BI-TECH (5)
- TRUSCO NAKAYAMA (5)
- WAKISANGYO (5)
- EUROFLEX (3)
- KURASHIKI KAKO (3)
- RICH ENGINEERIN (3)
- AMF (2)
- GIFU SANKEN KOGYO (2)
- OHNORUBBER (2)
- SUN FASTENER (2)
- WOOJIN (2)
- SHIMIZU (2)
- 999SHIMANO (1)
- ESCO (1)
- IWATA MFG (1)
- NANSIN (1)
- SUNCO (1)
- YAHATA NEJI (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Adjuster
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.