INA Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
Narrow search by specifying Type2
-
-
Flange -
Housing -
Related Components -
Standard Flange -
Center Flange
?* Information on days to ship and prices
-
Linear ball bearings / KH..-PP / greased at first / sealed at both ends / relubrication possible
INA
- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / steel / open recirculating ball bearing / KH
INA
[Features]
● Unlimited linear action due to ball circulation.
● As well as allowing the balls to circulate, the slot of the outer ring functions as a lubrication.
● DIN standard part.
● Precision slide parts such as in precision equipment.- Volume Discount
Starting from∗ ： 13.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Linear ball bearings / KN..-B-PP / closed design / sealed on all sides / relubrication facility / angle adjustable
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KN..-B-PP, Lightweight range, closed design, sealed on all sides, with relubrication facility, adjustable angle- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KH..-PP / greased at first / sealed at both ends / relubrication facility / corrosion-resistant
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 6~30
・Overall Length L(mm): 22~50
・Outer Diameter D(mm): 12~40Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KFB..-PP-AS with flange, sealed on all sides, relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
With flange, sealed, greased, with relubrication facility; corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGBAO..-PP-AS, open design, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Open design, sealed, greased, with relubrication facility; corrosion-resistant design possible.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGSNO..-PP-AS, with self-aligning linear ball bearing, open design, sealed, greased, relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 22~62
・Overall Length L(mm): 32~80
With self-aligning linear ball bearing, open design, sealed, greased, with relubrication facility.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KB..-PP / sealed on all sides / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Linear ball bearings, Sealed, With anti-corrosion protection.
[Features]
・With initial greasing, sealed on both sides, with relubrication facility
・Slot dimensions suitable for retaining rings to DIN 471
・The basic load ratings are only valid for hardened (670 HV + 170 HV) andground shaft raceways
・Also available in slotted design and with segment cutout- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KTFS..-PP-AS, with self-aligning linear ball bearing, sealed, greased, with relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~25
・Overall Length L(mm): 70~122
With self-aligning linear ball bearing, sealed, greased, with relubrication facility.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGHK..-B-PP-AS, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 6~50
・Overall Length L(mm): 22~70.2
Sealed, greased, with relubrication facility; corrosion-resistant design possible.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KB..-PP-AS / sealed on all sides / relubrication facility / corrosion-resistant design possiblech
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
[Features]
・With initial greasing, sealed on both sides, with relubrication facility
・Slot dimensions suitable for retaining rings to DIN 471
・The basic load ratings are only valid for hardened (670 HV + 170 HV) andground shaft raceways
・Also available in slotted design and with segment cutout
・KB series- 3D CAD data available
Min. Shipping Days ： 4 Days -
Min. Shipping Days ： 4 Days -
Linear ball bearings / KH..-P / initially greased / sealed on one side / relubrication possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 6~50
・Overall Length L(mm): 22~70
・Outer Diameter D(mm): 12~62
・N2(mm): 2, 2.5Min. Shipping Days ： 4 Days -
Linear ball bearings / KNO..-B-PP / open design / sealed on all sides / relubrication facility / angle adjustable
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KNO..-B-PP, Lightweight range, open design, sealed on all sides, with relubrication facility, adjustable angle- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KS..-PP / lip seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KS..-PP, heavy load range, lip seals on both sides- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGSNOS..-PP-AS, with self-aligning linear ball bearing, open design, sealed, greased, relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 22~62
・Overall Length L(mm): 32~80
With self-aligning linear ball bearing, open slotted design, sealed, greased, with relubrication facility.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KTB..-PP-AS, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 76~224
Sealed, greased, with relubrication facility; corrosion-resistant design possible.Min. Shipping Days ： 4 Days -
Linear ball bearings / KBO..-P / open design / sealed on one side / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100Min. Shipping Days ： 4 Days -
Linear ball bearings / KBO..-PP / open design / sealed on all sides / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Linear ball bearings KBO..-PP, machined range, open design, sealed on all sides, corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBS / adjustable / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBS..-PP / sealed on all sides / adjustable / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
・B3(mm): 1
Linear ball bearings KBS..-PP, machined range, adjustable, sealed on all sides, corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBS..-PP-AS / sealed on all sides / relubrication facility / adjustable / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~40
・Overall Length L(mm): 32~80
・Outer Diameter D(mm): 22~62
Linear ball bearings KBS..-PP-AS, machined range, adjustable, sealed on all sides, with relubrication facility, corrosionresistant design possible.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KN..-B / closed design / relubrication facility / angle adjustable
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KN..-B, Lightweight range, closed design, with relubrication facility, adjustable angle- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KS / gap seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KS.., heavy load range, gap seals on both sides- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KSO..-PP / open design / lip seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KSO..-PP, heavy load range, lip seals on both sides- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGB..-PP-AS, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Sealed, greased, with relubrication facility; corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGBAS..-PP-AS, adjustable, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Adjustable, sealed, greased, with relubrication facility; corrosion-resistant design possible.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGHA..-PP, closed, sealed
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~30
・Overall Length L(mm): 38~71.5
Sealed, greased, corrosion-resistant design possible.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGSC..-PP-AS, with self-aligning linear ball bearing, open design, sealed, greased, with relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 20~50
・Overall Length L(mm): 58~100
With self-aligning linear ball bearing, open design, sealed, greased, with relubrication facility.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGSNG..-PP-AS, with self-aligning linear ball bearing, sealed, greased, relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 26~75
・Overall Length L(mm): 37~100
With self-aligning linear ball bearing, sealed, greased, with relubrication facility.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGSNS..-PP-AS, with self-aligning linear ball bearing, slotted design, sealed, greased, relubrication facility
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 62
・Overall Length L(mm): 80
Linear ball bearing and housing unit; Heavy duty range, With segment cutout, without slot, sealed, greased, with relubrication facility.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KTBO..-PP-AS, open design, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 76~224
Open design, sealed, greased, with relubrication facility; corrosion-resistant design possible- 3D CAD data available
Starting from∗ ： 235.02 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Linear ball bearing and housing units / KTSG..-PP-AS, with self-aligning linear ball bearing, contact seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~30
・Overall Length L(mm): 70~142
With self-aligning linear ball bearing, contact seals on both sides- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KTSO..-PP-AS, open design, with self-aligning linear ball bearing, contact seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~25
・Overall Length L(mm): 70~122
Open design, with self-aligning linear ball bearing, contact seals on both sides.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KTSOS..-PP-AS, open design, adjustable clearance, with self-aligning linear ball bearing, contact seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~30
・Overall Length L(mm): 70~142
Open design, adjustable clearance, with self-aligning linear ball bearing, contact seals on both sides.- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KB..-P / sealed on one side / relubrication possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
[Features]
・With initial greasing, sealed on both sides, with relubrication facility
・Slot dimensions suitable for retaining rings to DIN 471
・The basic load ratings are only valid for hardened (670 HV + 170 HV) andground shaft raceways
・Also available in slotted design and with segment cutoutMin. Shipping Days ： 4 Days -
Linear ball bearings / KB..-PP-RROC-AS / sealed on all sides / can be relubricated / corrosion-resistant design
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Linear ball bearings, Sealed, With anti-corrosion protection.
[Features]
・With initial greasing, sealed on both sides, with relubrication facility
・Slot dimensions suitable for retaining rings to DIN 471
・The basic load ratings are only valid for hardened (670 HV + 170 HV) andground shaft raceways
・Also available in slotted design and with segment cutout
・KB series- Volume Discount
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBO / open design / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Linear ball bearings KBO.., machined range, open design, corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBO..-PP-AS / open design / sealed on all sides / relubrication facility / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
Linear ball bearings KBO..-PP-AS, machined range, open design, sealed on all sides, with relubrication facility, corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KBS..-P / sealed on one side / adjustable / corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
・B3(mm): 1Min. Shipping Days ： 4 Days -
Linear ball bearings / KH..-PP-RROC / greased at first / sealed at both ends / can be relubricated / corrosion-resistant
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 8~50
・Overall Length L(mm): 24~70
・Outer Diameter D(mm): 15~62Min. Shipping Days ： 4 Days -
Linear ball bearings / KH..-P-RROC / greased at first / sealed at one end / relubrication facility / corrosion-resistant
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 20
・Overall Length L(mm): 30
・Outer Diameter D(mm): 28Min. Shipping Days ： 4 Days -
Linear ball bearings / KNO..-B / open design / relubrication facility / angle adjustable
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KNO..-B, Lightweight range, open design, with relubrication facility, adjustable angle- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearings / KSO / open design / gap seals on both sides
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~50
・Overall Length L(mm): 32~100
・Outer Diameter D(mm): 22~75
Linear ball bearings KSO.., heavy load range, open design, gap seals on both sides- Volume Discount
- 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear ball bearing and housing units / KGBA..-PP-AS, sealed, greased, relubrication facility, corrosion-resistant design possible
INA
[Specifications]
・Diameter of Inscribed Circle dr(mm): 12~40
・Overall Length L(mm): 32~80
Sealed, greased, with relubrication facility; corrosion-resistant design possible.- 3D CAD data available
Min. Shipping Days ： 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type2 |
| RoHS Information |
| Style |
| Features, Areas of Application |
| Flange Type |
| Diameter of Inscribed Circle dr(mm) |
| Overall Length L(mm) |
| Material of Outer Cylinder |
| Outer Cylinder Surface Treatment |
| Motion |
| Lubrication Type |
| The circulation type of balls |
| Outer Diameter D(mm) |
| Accuracy |
| Eccentricity(μm) |
| Type |
| Length |
| Linear Motion / Rotational Motion |
| Basic Rated Load, Dynamic Rating |
| Flange Shape |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA | INA |
| Product Series | Linear ball bearings / KH..-PP / greased at first / sealed at both ends / relubrication possible | Linear ball bearings / steel / open recirculating ball bearing / KH | Linear ball bearings / KB..-PP / sealed on all sides / corrosion-resistant design possible | Linear ball bearings / KH..-P / initially greased / sealed on one side / relubrication possible | Linear ball bearings / KBS / adjustable / corrosion-resistant design possible | Linear ball bearings / KN..-B / closed design / relubrication facility / angle adjustable | Linear ball bearings / KSO..-PP / open design / lip seals on both sides | Linear ball bearing and housing units / KGHA..-PP, closed, sealed | Linear ball bearings / KB..-P / sealed on one side / relubrication possible | Linear ball bearings / KBO / open design / corrosion-resistant design possible | Linear ball bearings / KNO..-B / open design / relubrication facility / angle adjustable | Linear ball bearings / KSO / open design / gap seals on both sides | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Starting from∗ | - | 13.26 € *Unit price with basic configuration Volume Discount | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 235.02 € *Unit price with basic configuration | - | - | - | - | - Volume Discount | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 12 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type2 | - | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Style | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Flange Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diameter of Inscribed Circle dr(mm) | 6 ～ 50 | 8 ～ 50 | 12 ～ 50 | 6 ～ 30 | 12 ～ 50 | 12 ～ 50 | 22 ～ 62 | 12 ～ 50 | 12 ～ 25 | 6 ～ 50 | 12 ～ 50 | 6 ～ 50 | 6 ～ 50 | 12 ～ 50 | 12 ～ 50 | 22 ～ 62 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 40 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 30 | 20 ～ 50 | 26 ～ 75 | 62 | 12 ～ 50 | 12 ～ 30 | 12 ～ 25 | 12 ～ 30 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 12 ～ 50 | 8 ～ 50 | 20 | 12 ～ 50 | 12 ～ 50 | 12 ～ 40 |
| Overall Length L(mm) | 22 ～ 70 | 24 ～ 70 | 32 ～ 100 | 22 ～ 50 | 32 ～ 100 | 32 ～ 100 | 32 ～ 80 | 32 ～ 100 | 70 ～ 122 | 22 ～ 70.2 | 32 ～ 100 | 22 ～ 70 | 22 ～ 70 | 32 ～ 100 | 32 ～ 100 | 32 ～ 80 | 76 ～ 224 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 80 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 38 ～ 71.5 | 58 ～ 100 | 37 ～ 100 | 80 | 76 ～ 224 | 70 ～ 142 | 70 ～ 122 | 70 ～ 142 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 32 ～ 100 | 24 ～ 70 | 30 | 32 ～ 100 | 32 ～ 100 | 32 ～ 80 |
| Material of Outer Cylinder | - | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Cylinder Surface Treatment | - | No Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Motion | - | Linear Motion | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Type | - | Grease coating | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| The circulation type of balls | - | Single | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Diameter D(mm) | 12 ～ 62 | 15 ～ 62 | 22 ～ 75 | 12 ～ 40 | - | - | - | 22 ～ 75 | - | - | 22 ～ 75 | 12 ～ 62 | 12 ～ 62 | 22 ～ 75 | 22 ～ 75 | - | - | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | 22 ～ 62 | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | - | - | - | - | - | - | - | - | - | - | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | 22 ～ 75 | 15 ～ 62 | 28 | 22 ～ 75 | 22 ～ 75 | - |
| Accuracy | - | Standard Grade | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Eccentricity(μm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Linear Motion / Rotational Motion | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Rated Load, Dynamic Rating | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Flange Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
RoHS Information
-
Style
-
Standard -
Open Type, Clearance Adjusting Type
-
-
Features, Areas of Application
-
Flange Type
-
Standard Flange -
Center Flanged -
Pilot Flange
-
-
Diameter of Inscribed Circle dr(mm)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 28.2
- 29
- 30
- 30.2
- 31
- 32
- 33
- 35
- 36
- 37
- 38
- 39
- 40
- 40.2
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 50.2
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 59.25
- 60
- 60.2
- 61
- 62
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.3
- 67.5
- 68
- 69
- 70
- 70.2
- 71.5
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 88
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 98
- 99
- 100
- 102
- 102.3
- 102.5
- 103
- 104
- 105
- 106
- 108
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 124
- 125
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 138
- 140
- 141
- 142
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 155.5
- 156
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 178
- 180
- 182
- 184
- 185
- 187
- 190
- 192
- 193
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 224
- 230
- 240
- 243
- 244
- 250
- 300
-
Material of Outer Cylinder
-
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Motion
-
Lubrication Type
- N/A
- Grease coating
- With Lubrication Unit MX
-
The circulation type of balls
-
Outer Diameter D(mm)
-
Accuracy
-
Eccentricity(μm)
-
Type
-
Length
-
Linear Motion / Rotational Motion
-
Linear Bushing (Linear Motion Only)
-
Linear Bushing (Linear Motion Only)
-
Basic Rated Load, Dynamic Rating
-
Flange Shape
-
Round Flange -
Square Flange -
Compact Flange
-
Narrow search by specifying Brand
-
- MISUMI (45)
- OZAK (59)
- INA (51)
- NORELEM (27)
- THK (25)
- MYT (21)
- NIPPON BEARING (20)
- KBS (14)
- SKF (10)
- SBC (10)
- ZEN (7)
- ASK LINEAR (4)
- BOSCH REXROTH (1)
- SNR (1)
- IKO (1)
- NTN (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Slide Packs, V Guides, Linear Rails
- Other Linear Motion Related Components
-
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.