MAEDLER Bearing Units

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Ball Flange Bearings SSKFL, Light Series

MAEDLER

Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	15.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units EK, for Fixed Side, Black Oxided

MAEDLER

Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Pillow Block Bearing EF.

Volume Discount

Starting from^∗ ：	87.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units EF, for Support Side, Black Oxided

MAEDLER

Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 2 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Pillow Block Bearing EK.

Volume Discount

Starting from^∗ ：	34.11 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings UCF (Grey Cast Iron)

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	11.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated

MAEDLER

Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Pillow Block Bearing EF.

Volume Discount

Starting from^∗ ：	100.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units EF, for Support Side, Nickel-plated

MAEDLER

Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 2 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Pillow Block Bearing EK.

Volume Discount

Starting from^∗ ：	44.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, Black

MAEDLER

Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rollingbearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Not recommended for axial force.

Volume Discount

Starting from^∗ ：	22.94 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings SSBPFL, Two-Part Steel Sheet, Stainless Steel

MAEDLER

Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions.
Re-lubricating is not possible.

Volume Discount

Starting from^∗ ：	24.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings UCFL (Grey Cast Iron)

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	9.87 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings UCP (Grey Cast Iron)

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	17.23 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSUCPA, Stainless Steel

MAEDLER

Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.

Delivery with stainless steel grease nipple.

* Maximum radial load if axial force = 0.
The axial load rating is approx. 20% of the radial load rating.

Volume Discount

Starting from^∗ ：	41.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Cap Bearings DIN 505 Version L, with Red Brass Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (CuSn7Zn4Pb7-C).
Bore Tolerance: ISO D10.

Volume Discount

Starting from^∗ ：	207.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings UCFC (Grey Cast Iron)

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
With centring spigot.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	13.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel

MAEDLER

Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304).
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Starting from^∗ ：	26.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings UP, Light Series, with Eccentric Ring

MAEDLER

Material: Housing: from Zinc die cast,
Rolling bearing: from bearing steel.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	6.41 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings UCPA

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	16.59 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flange Bearing Units FF, for Support Side, Black Oxided

MAEDLER

Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 4 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Flange Bearing FK.

Volume Discount

Starting from^∗ ：	24.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units BF, for Support Side, Nickel-plated

MAEDLER

Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 6 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Pillow Block Bearing BK.

Volume Discount

Starting from^∗ ：	42.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings BPF (Two-Part Steel Sheet, Zinc-plated)

MAEDLER

Material: Housing from two-part steel sheets, zinc-plated.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Starting from^∗ ：	13.42 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings BPFL (Two-Part Steel Sheet, Zinc-Plated)

MAEDLER

Material: Housing from two-part steel sheets, zinc-plated.
Rolling bearing from bearing steel.
With 2 mounting holes.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Starting from^∗ ：	13.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated)

MAEDLER

Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Starting from^∗ ：	13.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flange Bearings DIN 502 Version A, with Red Brass Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.

Volume Discount

Starting from^∗ ：	203.78 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flange Bearings DIN 502 Version B, without Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bore Tolerance: ISO D7.

Volume Discount

Starting from^∗ ：	75.78 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flange Bearings DIN 503 Version A, with Red Brass Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.

Volume Discount

Starting from^∗ ：	185.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.

Volume Discount

Starting from^∗ ：	132.21 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bore Tolerance: ISO D7.

Volume Discount

Starting from^∗ ：	48.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, White

MAEDLER

Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Not recommended for axial force.

Volume Discount

Starting from^∗ ：	23.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, White

MAEDLER

Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.

Volume Discount

Starting from^∗ ：	26.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, Black

MAEDLER

Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.

Volume Discount

Starting from^∗ ：	24.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings SSUFL, Light Series, with Eccentric Ring

MAEDLER

Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	15.11 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings SSUCFL, Stainless Steel

MAEDLER

Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304).Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.

Delivery with stainless steel grease nipple.

Volume Discount

Starting from^∗ ：	33.28 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings SSUCF, Stainless Steel

MAEDLER

Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.

Delivery with stainless steel grease nipple.

Volume Discount

Starting from^∗ ：	40.23 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings SSBPF, Two-Part Steel Sheet, Stainless Steel

MAEDLER

Volume Discount

Starting from^∗ ：	25.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Protection Caps for Thermoplastic Pillow Bearings TUCP, TUCF and TUCFL, White

MAEDLER

Material: Thermoplast PBT, white.
Open Design with sealing for shaft side or closed design.
The caps fit only on the one bearing side with the setscrews. They can get clipped on by hand by the customer.
Temperature range: -20°C to +90°C (for short time up to +120°C).

Volume Discount

Starting from^∗ ：	1.42 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings KFL, Light Series

MAEDLER

Material: Housing: from Zinc die cast,
Rolling bearing: from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	4.47 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Protection Caps for Thermoplastic Pillow Bearings TUCP, TUCF and TUCFL, Black

MAEDLER

Material: Thermoplast PBT, black.
Open Design with sealing for shaft side or closed design.
The caps fit only on the one bearing side with the setscrews. They can get clipped on by hand by the customer.
Temperature range: -20°C to +90°C (for short time up to +120°C).

Volume Discount

Starting from^∗ ：	1.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Extensions G1/4" R1/4"

MAEDLER

Material: Brass.
Steel, zinc-plated.
Extension with Whitworth pipe thread 1/4", suitable for e.g.:
- Flange bearings DIN 502 A, DIN 502 B and DIN 503.
- Pillow block bearings DIN 504 A, DIN 504 B and DIN 505.
- Lubricators.
- Drip-feed oilers Unikum and UNI, sizes with R1/4".
- Stauffer grease boxes, sizes with R1/4".

Volume Discount

Starting from^∗ ：	11.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings UFL, Light Series, with Eccentric Ring

MAEDLER

Volume Discount

Starting from^∗ ：	5.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Flange Bearings UCFA (Grey Cast Iron)

MAEDLER

Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
With 2 mounting holes, one of them slotted.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.

Volume Discount

Starting from^∗ ：	16.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSKP, Light Series

MAEDLER

Volume Discount

Starting from^∗ ：	30.16 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Light-Duty Pillow Block Bearings HM

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bore tolerance: ISO D9.
With Bore for Drive-In Oiler.

Volume Discount

Starting from^∗ ：	35.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings KP, Light Series

MAEDLER

Material: Housing: from Zinc die cast,
Rolling Bearing: from bearing steel.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	8.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, White

MAEDLER

Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.

Volume Discount

Starting from^∗ ：	26.00 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, Black

MAEDLER

Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).

* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.

Volume Discount

Starting from^∗ ：	24.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSUP, Light Series, with Eccentric Ring

MAEDLER

Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.

Volume Discount

Starting from^∗ ：	20.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Unit, Type
Bearing Unit, Type
Shaft Bore Dia. d(mm)
Unit Body Material
Bearing Inner Dia. Shape
Pillow Type, Category
Rolling Element Material
Surface Treatment


Brand	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER
Product Series	Ball Flange Bearings SSKFL, Light Series	Pillow Block Bearing Units EK, for Fixed Side, Black Oxided	Pillow Block Bearing Units EF, for Support Side, Black Oxided	Ball Flange Bearings UCF (Grey Cast Iron)	Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated	Pillow Block Bearing Units EF, for Support Side, Nickel-plated	Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, Black	Ball Flange Bearings SSBPFL, Two-Part Steel Sheet, Stainless Steel	Ball Flange Bearings UCFL (Grey Cast Iron)	Ball Pillow Block Bearings UCP (Grey Cast Iron)	Ball Pillow Block Bearings SSUCPA, Stainless Steel	Cap Bearings DIN 505 Version L, with Red Brass Bush	Ball Flange Bearings UCFC (Grey Cast Iron)	Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel	Ball Pillow Block Bearings UP, Light Series, with Eccentric Ring	Ball Pillow Block Bearings UCPA	Flange Bearing Units FF, for Support Side, Black Oxided	Pillow Block Bearing Units BF, for Support Side, Nickel-plated	Ball Flange Bearings BPF (Two-Part Steel Sheet, Zinc-plated)	Ball Flange Bearings BPFL (Two-Part Steel Sheet, Zinc-Plated)	Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated)	Flange Bearings DIN 502 Version A, with Red Brass Bush	Flange Bearings DIN 502 Version B, without Bush	Flange Bearings DIN 503 Version A, with Red Brass Bush	Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush	Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush	Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, White	Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, White	Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, Black	Ball Flange Bearings SSUFL, Light Series, with Eccentric Ring	Ball Flange Bearings SSUCFL, Stainless Steel	Ball Flange Bearings SSUCF, Stainless Steel	Ball Flange Bearings SSBPF, Two-Part Steel Sheet, Stainless Steel	Protection Caps for Thermoplastic Pillow Bearings TUCP, TUCF and TUCFL, White	Ball Flange Bearings KFL, Light Series	Protection Caps for Thermoplastic Pillow Bearings TUCP, TUCF and TUCFL, Black	Extensions G1/4" R1/4"	Ball Flange Bearings UFL, Light Series, with Eccentric Ring	Ball Flange Bearings UCFA (Grey Cast Iron)	Ball Pillow Block Bearings SSKP, Light Series	Light-Duty Pillow Block Bearings HM	Ball Pillow Block Bearings KP, Light Series	Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, White	Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, Black	Ball Pillow Block Bearings SSUP, Light Series, with Eccentric Ring
Starting from^∗	15.05 € *Unit price with basic configuration Volume Discount	87.60 € *Unit price with basic configuration Volume Discount	34.11 € *Unit price with basic configuration Volume Discount	11.91 € *Unit price with basic configuration Volume Discount	100.22 € *Unit price with basic configuration Volume Discount	44.66 € *Unit price with basic configuration Volume Discount	22.94 € *Unit price with basic configuration Volume Discount	24.06 € *Unit price with basic configuration Volume Discount	9.87 € *Unit price with basic configuration Volume Discount	17.23 € *Unit price with basic configuration Volume Discount	41.67 € *Unit price with basic configuration Volume Discount	207.06 € *Unit price with basic configuration Volume Discount	13.08 € *Unit price with basic configuration Volume Discount	26.06 € *Unit price with basic configuration Volume Discount	6.41 € *Unit price with basic configuration Volume Discount	16.59 € *Unit price with basic configuration Volume Discount	24.62 € *Unit price with basic configuration Volume Discount	42.01 € *Unit price with basic configuration Volume Discount	13.42 € *Unit price with basic configuration Volume Discount	13.61 € *Unit price with basic configuration Volume Discount	13.53 € *Unit price with basic configuration Volume Discount	203.78 € *Unit price with basic configuration Volume Discount	75.78 € *Unit price with basic configuration Volume Discount	185.76 € *Unit price with basic configuration Volume Discount	132.21 € *Unit price with basic configuration Volume Discount	48.24 € *Unit price with basic configuration Volume Discount	23.96 € *Unit price with basic configuration Volume Discount	26.35 € *Unit price with basic configuration Volume Discount	24.72 € *Unit price with basic configuration Volume Discount	15.11 € *Unit price with basic configuration Volume Discount	33.28 € *Unit price with basic configuration Volume Discount	40.23 € *Unit price with basic configuration Volume Discount	25.88 € *Unit price with basic configuration Volume Discount	1.42 € *Unit price with basic configuration Volume Discount	4.47 € *Unit price with basic configuration Volume Discount	1.07 € *Unit price with basic configuration Volume Discount	11.38 € *Unit price with basic configuration Volume Discount	5.24 € *Unit price with basic configuration Volume Discount	16.09 € *Unit price with basic configuration Volume Discount	30.16 € *Unit price with basic configuration Volume Discount	35.53 € *Unit price with basic configuration Volume Discount	8.22 € *Unit price with basic configuration Volume Discount	26.00 € *Unit price with basic configuration Volume Discount	24.66 € *Unit price with basic configuration Volume Discount	20.06 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Unit, Type	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Others	Bearing Unit	Others	Others	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit
Bearing Unit, Type	Others	Pillow Type	Pillow Type	Others	Pillow Type	Pillow Type	Others	Others	Others	Pillow Type	Pillow Type	Others	Others	Pillow Type	Pillow Type	Pillow Type	Others	Pillow Type	Others	Others	Pillow Type	Others	Others	Others	Pillow Type	Pillow Type	Others	Others	Others	Others	Others	Others	Others	-	Others	-	-	Others	Others	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type
Shaft Bore Dia. d(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Unit Body Material	Stainless Steel	Steel	Steel	Others	Steel	Steel	Others	Stainless Steel	Others	Others	Stainless Steel	Others	Others	Stainless Steel	Others	Others	Steel	Steel	Steel	Steel	Steel	Others	Others	Others	Others	Others	Others	Others	Others	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	-	Others	-	-	Others	Others	Stainless Steel	Others	Others	Others	Others	Stainless Steel
Bearing Inner Dia. Shape	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pillow Type, Category	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Rolling Element Material	Stainless Steel	-	-	Steel	-	-	Stainless Steel	Stainless Steel	Steel	Steel	Stainless Steel	-	Steel	Stainless Steel	Steel	Steel	-	-	Steel	Steel	Steel	-	-	-	-	-	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	-	Steel	-	-	Steel	Steel	Stainless Steel	-	Steel	Stainless Steel	Stainless Steel	Stainless Steel
Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Unit, Type
- Bearing Unit
- Plummer Block
- Framed Bearing Unit
- Others
Enlarge image

Clear

Bearing Unit, Type
- Pillow Type
- Square Flange Type
- Round Flange Type
- Diamond-Shaped Flange Type
- Take-Up Type
- Deformed Diamond-Shaped Flange Type
- Others
Enlarge image

Clear

Shaft Bore Dia. d(mm)
1-1/4

6

8

10

12

12.7

15

15.875

16

17

19.05

19.05 - 30

20

22.225

22.225 - 35

23.812

23.813

25

25.4

28.575

28.575 - 40

30

30.162

30.163

31.75

31.75 - 50

33.34

34.925

34.93

35

36.512

36.513

36.513 - 45

36.513 - 55

38.1

40

41.275

41.275 - 60

42.862

44.45

45

47.625

47.625 - 65

49.213

50

50.8

53.975 - 75

55

55.562

55.563

55.563 - 80

57.15

60

61.913

61.913 - 90

63.5

65

68.262

68.263

70

74.613

74.613 - 85

74.613 - 100

74.6131

75

79.375 - 90

80

82.55

85

87.313

87.313 - 120

90

95

100

105

110

114.3

115

120

125

130

131.763

138.113

140

160
Drawing

Clear

Unit Body Material
- Cast Iron
- Stainless Steel
- Steel Plate
- Structural Steel
- Resin
- Others
- Steel
Clear

Bearing Inner Dia. Shape
- Cylindrical Hole
- Cylindrical Hole, Set Screw
- Cylindrical Hole, Eccentric Collar
- Taper Hole
- Taper Hole, Adapter
- Others
Images

Clear

Pillow Type, Category
- Standard
- Thick
- High Center
- Narrow Width
- Lightweight
Images

Clear

Rolling Element Material
- Steel
- Stainless Steel
Clear

Surface Treatment
- Not Provided
- Black Oxide
Clear

Narrow search by specifying Brand

- MISUMI (13)
- Cost Efficient Products ()
- INA (240)
- SKF (113)
- MAEDLER (52)
- NIPPON PILLOW BLOCK (38)
- NORELEM (31)
- ASAHI SEIKO (28)
- FAG (28)
- NTN (28)
- FSBEARING (11)
- SNR (10)
- ZEN (9)
- NKE BEARINGS (4)
- KMT BEARINGS (1)
- TIMKEN (1)
- SANWA CONVEYOR (1)
- TOHO (1)
Clear