MAEDLER Keyless Bushing (Fastening Fittings)

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Locking Assemblies COM-A

MAEDLER

Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	15.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies TOK Version A

MAEDLER

Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).

Volume Discount

Starting from^∗ ：	12.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies SIG

MAEDLER

Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness R_z max. 12.5 μm.

Volume Discount

Starting from^∗ ：	28.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-B

MAEDLER

Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	18.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 2012

MAEDLER

Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.

Volume Discount

Starting from^∗ ：	10.94 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies TOK Version B

MAEDLER

Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).

Volume Discount

Starting from^∗ ：	14.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 2517

MAEDLER

Volume Discount

Starting from^∗ ：	16.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies TMK Version A

MAEDLER

Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).

Volume Discount

Starting from^∗ ：	15.34 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies BAR

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.

Volume Discount

Starting from^∗ ：	24.10 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-L, QPQ-Coated

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.

* When using in a stepped bore, the clearance C is to be foreseen for demounting.

Volume Discount

Starting from^∗ ：	33.68 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1008

MAEDLER

Volume Discount

Starting from^∗ ：	4.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1108

MAEDLER

Volume Discount

Starting from^∗ ：	5.28 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies TMK Version B

MAEDLER

Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).

Volume Discount

Starting from^∗ ：	17.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-AS

MAEDLER

Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques. Like COM-A, but with slotted rings.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	12.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-CB3

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• 3 Ranges of sizes, for middle, higher and very high torques.
• Compact size in axial direction.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	12.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 3525

MAEDLER

Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.

Volume Discount

Starting from^∗ ：	38.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies TT 3-16 mm

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).

Volume Discount

Starting from^∗ ：	31.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies SSG

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For low to medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• Axial movement during mounting.

Volume Discount

Starting from^∗ ：	15.03 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies (Rigid Couplings) ST-K

MAEDLER

Material: Steel.
• For connecting two shafts, as a rigid coupling.
• For medium torques.
• Easy mounting.
• Self-releasing at dismounting.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	19.59 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping Bushes MSD

MAEDLER

Material: Steel.
The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
Concentricity: ≈ 0.03 - 0.06 mm.
Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
Temperature range: -30 °C to 85 °C.

P_W ≈ 90N/mm² P_N ≈ 70N/mm132

Volume Discount

Starting from^∗ ：	192.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spare Screws for Taper Bushes

MAEDLER

Material: Steel.
Supply: One screw. Order quantity as needed.
Taper bushes have two or (from size 3525) three screws, depending on bush size. Thread BSW (Whitworth), with metric hexagon.

Volume Discount

Starting from^∗ ：	0.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adaptors for Taper Bushes

MAEDLER

Material: Grey Cast Iron GG25.
Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø d_a (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.

Volume Discount

Starting from^∗ ：	6.87 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bolt-on Hubs for Taper Bushes

MAEDLER

Material: Grey Cast Iron GG25. Product No. 14090147: from steel.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.

Volume Discount

Starting from^∗ ：	13.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies BAR, QPQ-Coated

MAEDLER

Material: Steel.
• For fixing a hub on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Self-centering.
• Slight axial offset possible during assembly.

Volume Discount

Starting from^∗ ：	27.57 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies BAR, Stainless

MAEDLER

Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• Stainless Steel.
• For low torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.

Volume Discount

Starting from^∗ ：	92.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-A, QPQ-Coated

MAEDLER

Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	19.58 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-A, Stainless

MAEDLER

Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For low torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	50.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-B, QPQ-Coated

MAEDLER

Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	21.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-B, Stainless

MAEDLER

Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For low torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	68.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-C

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium to high torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.

Volume Discount

Starting from^∗ ：	19.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-C, Stainless

MAEDLER

Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.

Volume Discount

Starting from^∗ ：	70.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-CB1

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.

Volume Discount

Starting from^∗ ：	11.89 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-CB2

MAEDLER

Material: Steel.
• For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	12.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-D

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.

Volume Discount

Starting from^∗ ：	16.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-L

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.

* When using in a stepped bore, the clearance C is to be foreseen for demounting.

Volume Discount

Starting from^∗ ：	28.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-LL

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.

Volume Discount

Starting from^∗ ：	31.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-LLH

MAEDLER

Material: Steel.
• For fixing a hub (e.g. sprocket or similar) on a shaft.
• For very high torques.
• Very good distribution of pressure.
• High resistant against bending forces.
• Self-centering.
• Self-locking.
• No axial movement during mounting.

Volume Discount

Starting from^∗ ：	52.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locking Assemblies COM-R

MAEDLER

Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower to medium torques.
• Not self-centering.
• Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
• Up to 4 clamping sets can be used in line.
• Versatile usage, for customized solutions.

Volume Discount

Starting from^∗ ：	5.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1210

MAEDLER

Volume Discount

Starting from^∗ ：	6.94 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1215

MAEDLER

Volume Discount

Starting from^∗ ：	8.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1610

MAEDLER

Volume Discount

Starting from^∗ ：	7.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 1615

MAEDLER

Volume Discount

Starting from^∗ ：	9.41 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 3020

MAEDLER

Volume Discount

Starting from^∗ ：	21.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 3030

MAEDLER

Volume Discount

Starting from^∗ ：	31.52 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Bushes 3535

MAEDLER

Volume Discount

Starting from^∗ ：	49.79 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Type
Centering
Body Material
Shaft Bore Dia. d(Ø)
Allowable Torque Range(N•m)
Surface Treatment
Hub Dia. D1(Ø)
Tightening Structure
Tightening Method
Allowable Torque(N•m)


Brand	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER
Product Series	Locking Assemblies COM-A	Locking Assemblies TOK Version A	Locking Assemblies SIG	Locking Assemblies COM-B	Taper Bushes 2012	Locking Assemblies TOK Version B	Taper Bushes 2517	Locking Assemblies TMK Version A	Locking Assemblies BAR	Locking Assemblies COM-L, QPQ-Coated	Taper Bushes 1008	Taper Bushes 1108	Locking Assemblies TMK Version B	Locking Assemblies COM-AS	Locking Assemblies COM-CB3	Taper Bushes 3525	Locking Assemblies TT 3-16 mm	Locking Assemblies SSG	Locking Assemblies (Rigid Couplings) ST-K	Clamping Bushes MSD	Spare Screws for Taper Bushes	Adaptors for Taper Bushes	Bolt-on Hubs for Taper Bushes	Locking Assemblies BAR, QPQ-Coated	Locking Assemblies BAR, Stainless	Locking Assemblies COM-A, QPQ-Coated	Locking Assemblies COM-A, Stainless	Locking Assemblies COM-B, QPQ-Coated	Locking Assemblies COM-B, Stainless	Locking Assemblies COM-C	Locking Assemblies COM-C, Stainless	Locking Assemblies COM-CB1	Locking Assemblies COM-CB2	Locking Assemblies COM-D	Locking Assemblies COM-L	Locking Assemblies COM-LL	Locking Assemblies COM-LLH	Locking Assemblies COM-R	Taper Bushes 1210	Taper Bushes 1215	Taper Bushes 1610	Taper Bushes 1615	Taper Bushes 3020	Taper Bushes 3030	Taper Bushes 3535
Starting from^∗	15.55 € *Unit price with basic configuration Volume Discount	12.35 € *Unit price with basic configuration Volume Discount	28.82 € *Unit price with basic configuration Volume Discount	18.43 € *Unit price with basic configuration Volume Discount	10.94 € *Unit price with basic configuration Volume Discount	14.38 € *Unit price with basic configuration Volume Discount	16.82 € *Unit price with basic configuration Volume Discount	15.34 € *Unit price with basic configuration Volume Discount	24.10 € *Unit price with basic configuration Volume Discount	33.68 € *Unit price with basic configuration Volume Discount	4.97 € *Unit price with basic configuration Volume Discount	5.28 € *Unit price with basic configuration Volume Discount	17.43 € *Unit price with basic configuration Volume Discount	12.30 € *Unit price with basic configuration Volume Discount	12.62 € *Unit price with basic configuration Volume Discount	38.30 € *Unit price with basic configuration Volume Discount	31.75 € *Unit price with basic configuration Volume Discount	15.03 € *Unit price with basic configuration Volume Discount	19.59 € *Unit price with basic configuration Volume Discount	192.36 € *Unit price with basic configuration Volume Discount	0.69 € *Unit price with basic configuration Volume Discount	6.87 € *Unit price with basic configuration Volume Discount	13.97 € *Unit price with basic configuration Volume Discount	27.57 € *Unit price with basic configuration Volume Discount	92.91 € *Unit price with basic configuration Volume Discount	19.58 € *Unit price with basic configuration Volume Discount	50.09 € *Unit price with basic configuration Volume Discount	21.01 € *Unit price with basic configuration Volume Discount	68.67 € *Unit price with basic configuration Volume Discount	19.37 € *Unit price with basic configuration Volume Discount	70.20 € *Unit price with basic configuration Volume Discount	11.89 € *Unit price with basic configuration Volume Discount	12.26 € *Unit price with basic configuration Volume Discount	16.15 € *Unit price with basic configuration Volume Discount	28.98 € *Unit price with basic configuration Volume Discount	31.43 € *Unit price with basic configuration Volume Discount	52.26 € *Unit price with basic configuration Volume Discount	5.72 € *Unit price with basic configuration Volume Discount	6.94 € *Unit price with basic configuration Volume Discount	8.09 € *Unit price with basic configuration Volume Discount	7.91 € *Unit price with basic configuration Volume Discount	9.41 € *Unit price with basic configuration Volume Discount	21.75 € *Unit price with basic configuration Volume Discount	31.52 € *Unit price with basic configuration Volume Discount	49.79 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Centering	Not Provided	Provided	Provided	Provided	-	Provided	-	Provided	Provided	Provided	-	-	Provided	Not Provided	Provided	-	Provided	Provided	Not Provided	Provided	-	-	-	Provided	Provided	Not Provided	Not Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Not Provided	-	-	-	-	-	-	-
Body Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shaft Bore Dia. d(Ø)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Torque Range(N•m)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Hub Dia. D1(Ø)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tightening Structure	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tightening Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Torque(N•m)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Type
- Flanged
- Straight
- Nut Tightening
- Thin Wall
- Direct Mounting
- Sleeve
Enlarge image

Clear

Centering
- Provided
- Not Provided
Clear

Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
Clear

Shaft Bore Dia. d(Ø)
2

4

4.5

5

6

6,35

6.35

7

8

9

9,53

10

11

12

13

14

15

16

17

18

19

20

22

24

25

25,4

28

30

32

35

36

38

40

42

45

48

50

55

56

60

63

65

70

71

75

80

85

90

95

100

105

110

115

120

130

140

150

160

170

180

190

200

220
Drawing

Clear

Allowable Torque Range(N•m)
2.0 to 20.0

20.1 to 50.0

50.1 to 70.0

70.1 to 100.0

100.1 to 150.0

150.1 to 200.0

200.1 to 300.0

300.1 to 500.0

500.1 to 700.0

700.1 to 1000.0

1000.1 to 3000.0

3000.1 to 10000.0

10000.1 to 300000.0
Clear

Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
Clear

Hub Dia. D1(Ø)
8

9

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

37

38

39

40

41

42

43

45

46

47

48

50

53

54

55

56

57

59

60

62

64

65

67

68

70

71

72

73

75

77

78

80

82

84

85

85.70

87

90

95

97

100

106

110

112

115

120

125

130

135

140

145

155

165

180

190

200

210

225

235

250

260

285
Drawing

Clear

Tightening Structure
- Single Cone Type
- Double Cone Type
- Tapered Sleeve Type
Images

Clear

Tightening Method
- Mechanical Type (Wedge Type)
Images

Clear

Allowable Torque(N•m)
0.098

0.101

0.144

0.153

0.164

0.251

0.308

0.332

0.490

0.525

0.563

0.702

1.019

1.061

1.138

1.768

1.939

2

2.2

2.287

2.432

2.5

2.8

3

4

4.2

4.6

5.6

5.7

6

6.9

7

7.8

8

8.5

9

10

10.7

11

12

12.7

14

14.7

15

16

16.6

17

18

19

19.6

20

21

22

22.5

23

24

24.5

25

26

27

27.5

28

28.4

29

29.4

30

30.4

31

32.3

33

34

34.3

36

36.2

37

38

39

39.2

40

41

42

43

44

45

46

46.1

47

48

49

50

50.9

51.9

52

53

54

54.8

56

58

58.8

60

61

62

63

65

67

68

69

70

71

74

75

76

76.4

78

80

80.3

83

85

85.2

88

88.3

90

91

92

94

96

97

103

104

108

110

115

120

121

121.6

123

124

125

130

131

133.4

140

141

142

146.1

149

150

153

157

167

168

172

176

180

183

186

193

195

198

201

210

213.8

219

220

221

229.5

230

232

233

240

244.2

245

247

252

256

262

264

265

270

274

275

279

284

285

289

290

291

294

295

299

300

301.1

305

314

315

320

323

324

330

333

335

350

352

353

362

363

372

378

380

385

392

396

400

403

405

409

410

411

412

423

428

430

430.6

431

440

452.2

460

461

470

471

484.6

488

490

499

500

510

523

529

530

533

540

548

558

570

571

576

620

620.9

632

670

676

690

696

720

725

730

731

741

750

754.3

765

770

779

800

810

813

823

850

880

882

883

929

931

950

970

976

1000

1010

1020

1060

1070

1110

1117

1140

1180

1200

1310

1360

1362

1451

1460

1500

1512.0

1550

1560

1600

1620

1640

1657

1670

1680

1690

1736

1750

1760

1768.0

1770

1775

1780

1800

1860

1870

1900

1910

1915.0

1920

1950

2000

2010

2040

2070

2120

2270

2430

2470

2500

2530

2570

2730

2760

2810

2920.0

2990

3040

3090

3380

3400

3800

4220

4600

4640

4800

4810

5060

5100

5160

5510

6400

6500

6880

7940

10100

11100

13500
Clear

Narrow search by specifying Brand

- MISUMI (6)
- Cost Efficient Products ()
- MAEDLER (61)
- RINGFEDER (28)
- CONCAR (26)
- ISEL (10)
- KBK (9)
- SUNGIL (9)
- NORELEM (3)
- KATAYAMA CHAIN (3)
- OPTIBELT (2)
- CAP (2)
- MIKI PULLEY (2)
- HALDER (2)
- Save & Secure (2)
- EVER-ON CORPORATION (1)
Clear