MAEDLER Rod End Bearings, Spherical Bearings

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Axial Joints Similar to DIN 71802, Stainless

MAEDLER

Material: Stainless steel 1.4301 (AISI 304).
With threaded bolt and hexagon nut.
Right-hand thread in the socket and at the stud.

Volume Discount

Starting from^∗ ：	8.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Axial Joints Similar to DIN 71802, Zinc-plated

MAEDLER

Material: Steel, zinc-plated.
With threaded bolt and hexagon nut, ball stud hardened.
Right-hand thread in the socket and at the stud.

Volume Discount

Starting from^∗ ：	2.03 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle Joints DIN 71802, Zinc-plated, with Mounted Sealing Cap

MAEDLER

Material: Steel zinc-plated. Ball stud hardened.
With mounted sealing cap from neopren, black.
Form C: With threaded bolt and hexagon nut.
Form CS: With threaded bolt, hexagon nut and circlip.
Right = Right-hand thread in the socket.
Left = Left-hand thread in the socket.

Volume Discount

Starting from^∗ ：	2.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GT DIN ISO 12240-4 (DIN 648), Series K, Maintenance Free, Internal Thread

MAEDLER

Material housing: Bores 6-12 mm, free cutting steel, turned, bores 14-30 mm C22 forged, zinc-plated.
Material outer ring: Free cutting steel with PTFE-lining.
Material inner ring: Roller bearing steel 100Cr6, hardened HRC 62 ±1, ground and polished.
For high, radial and axial alternating loads.
Sliding speeds up to 10 m/min.
Load tables pages 800 - 801.
IR = Internal Right-hand thread. IL = Internal Left-hand thread.

Volume Discount

Starting from^∗ ：	12.16 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series E, Stainless Steel, Maintenance-free

MAEDLER

Material stainless: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished. Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.
• DIN ISO 12240-1 (DIN 648), series E (slim shape).
• Maintenance-free.
• Suitable for high unidirectional load.
• Sliding speed up to 10 m/min.

Volume Discount

Starting from^∗ ：	22.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle Joints DIN 71802, Zinc-plated

MAEDLER

Material: Steel zinc-plated. Ball stud hardened.
Form C: With threaded bolt and hexagon nut.
Form CS: With threaded bolt, hexagon nut and circlip.
Right = Right-hand thread in the socket.
Left = Left-hand thread in the socket, marked with a circumferential groove.

Volume Discount

Starting from^∗ ：	2.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GS DIN ISO 12240-4 (DIN 648), Series K, Internal Thread

MAEDLER

Material housing: Bores 6-12 mm, free cutting steel, turned, bores 14-30 mm C22 forged, zinc-plated.
Material outer ring: Special brass CuZn38Al1.
Material inner ring: Roller bearing steel 100Cr6, hardened HRC 62 ±1, ground and polished.
Normal bearing clearance: 5 - 50 μ at a measuring load of 100 N.
Sliding speeds up to 60 m/min. Steel on high-duty brass, thus high radial and axial alternating loads.
Load tables pages 800 - 801.

Initial lubrication before use is required!
IR = Internal-Right hand thread. IL = Internal Left-hand thread.

Volume Discount

Starting from^∗ ：	15.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 (DIN 648), Series K, External Thread

MAEDLER

Material housing: Alloyed, case-hardened steel (forged piece) quenched and tempered, bearing race hardened, ground and lapped. Thread rolled/cut, surface zinc-plated and chromatised.
Material inner ring: Bearing steel hardened, precisely honed.
Lubricant: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC.
Special grease if required.
Basically without friction, long-term lubrication, sealed with cover plates, offer small dimensions, large pivoting angle and high load rating.
AR = External Right-hand thread. AL = External Left-hand thread.

Volume Discount

Starting from^∗ ：	49.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Steel, Maintenance-free

MAEDLER

Material standard: Inner ring bearing steel 100Cr6, hardened, ground and polished. Bearing shell free cutting steel, zinc-plated, with PTFE-lining.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Maintenance-free.
• Suitable for high dynamic loads.
• Without additional outer ring.

Volume Discount

Starting from^∗ ：	10.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Stainless Steel, Maintenance-free

MAEDLER

Material stainless: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing shell stainless steel1.4571 (AISI 316 Ti), with PTFE-lining.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Maintenance-free.
• Suitable for high dynamic loads.
• Without additional outer ring.

Volume Discount

Starting from^∗ ：	22.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series E, Steel, Maintenance-free

MAEDLER

Material standard: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed. Bearing shell from bearing steel, 100Cr6 with PTFE-lining. From size 35 in 2RS-version (sealed on both sides).
• DIN ISO 12240-1 (DIN 648), series E (slim shape).
• Maintenance-free.
• Suitable for high unidirectional load.
• Sliding speed up to 10 m/min.

Volume Discount

Starting from^∗ ：	9.18 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Rod Ends GEW DIN ISO 12240-4 (DIN 648) Series E, Maintenance Free, Internal Thread

MAEDLER

Material housing: up to size 10 free cutting steel, turned, zinc-plated; from size 12 heat-treated steel C45, forged, zinc-plated.
Material bearing: maintenance-free steel/PTFE bearing.
Material tribological pairing: hard chrome - steel/PTFE
Application: For pivoting motions (alternating load). Not for higher speeds.
IR = Internal Right-hand thread. IL = Internal Left-hand thread.

Volume Discount

Starting from^∗ ：	14.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GT-R DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, Stainless Steel, Internal Thread

MAEDLER

Material housing: Stainless steel 1.4057, AISI 431 (forged piece, size 40 machined). Surface clear stained.
Material outer ring: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-lining.
Material inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, all sides ground, bearing surface polished.
IR = Internal Right-hand thread. IL = Internal Left-hand thread

Volume Discount

Starting from^∗ ：	30.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GT-R DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, Stainless Steel, External Thread

MAEDLER

Material housing: Stainless steel 1.4057, AISI 431 (forged piece, size 40 machined). Thread rolled, surface clear stained.
Material outer ring: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-lining.
Material inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, all sides ground, bearing surface polished.
AR = External Right-hand thread. AL = External Left-hand thread

Volume Discount

Starting from^∗ ：	30.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle Joints DIN 71802, Stainless

MAEDLER

Material: Stainless steel 1.4301 (AISI 304).
Design CS: With threaded bolt, hexagon nut and circlip.
Right = Right-hand thread in the socket.
Left = Left-hand thread in the socket, marked with a circumferential groove.

Volume Discount

Starting from^∗ ：	14.47 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GS DIN ISO 12240-4 (DIN 648), Series K, External Thread

MAEDLER

Initial lubrication before use is required!
AR = External Right-hand thread. AL = External Left-hand thread.

Volume Discount

Starting from^∗ ：	15.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 (DIN 648), Series K, Internal Thread

MAEDLER

Material housing: Alloyed, case-hardened steel (forged piece) quenched and tempered, bearing race hardened, ground and lapped. Thread rolled/cut, surface zinc-plated and chromatised.
Material inner ring: Bearing steel hardened, precisely honed.
Lubricant: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC.
Special grease if required.
Rod end with low friction ball bearing, long-term lubricated,sealed with cover plates, with high load rating.
IR = Internal Right-hand thread. IL = Internal Left-hand thread.

Volume Discount

Starting from^∗ ：	49.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Steel, Re-lubricateable, with Outer Ring

MAEDLER

Material: Inner ring bearing steel 100Cr6, hardened, ground and polished. Bearing shell special brass CuZn38Al1. Outer ring steel 9SMnPb28K, zinc-plated.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Re-lubricateable, initial lubrication before use is required.
• Suitable for higher speeds at short time.
• With additional outer ring.

Volume Discount

Starting from^∗ ：	14.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Steel, Re-lubricateable

MAEDLER

Material: Inner ring bearing steel 100Cr6, hardened, ground and polished. Bearing shell special brass CuZn38Al1.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Re-lubricateable (from size 6 with lubrication hole).
• Initial lubrication before use is required.
• Suitable for higher speeds at short time.
• Without additional outer ring.

Volume Discount

Starting from^∗ ：	9.99 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Steel, Maintenance-free, with Outer Ring

MAEDLER

Material standard: Inner ring bearing steel 100Cr6, hardened, ground and polished. Outer ring and bearing shell free cutting steel, zinc-plated. With PTFE-lining.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Maintenance-free.
• Suitable for high dynamic loads.
• With additional outer ring.

Volume Discount

Starting from^∗ ：	14.73 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Stainless Steel, Re-lubricateable, with Outer Ring

MAEDLER

Material stainless: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Re-lubricateable, initial lubrication before use is required.
• Suitable for higher speeds at short time.
• With additional outer ring.

Volume Discount

Starting from^∗ ：	26.16 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Stainless Steel, Re-lubricateable

MAEDLER

Material stainless: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing shell special brass CuZn38Al1.
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Re-lubricateable (from size 6 with lubrication hole).
• Initial lubrication before use is required.
• Suitable for higher speeds at short time.
• Without additional outer ring.

Volume Discount

Starting from^∗ ：	22.64 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series K, Stainless Steel, Maintenance-free, with Outer Ring

MAEDLER

Material stainless: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing shell stainless steel 1.4571 (AISI 316 Ti) with PTFE-lining. Outer ring stainless steel 1.4305 (AISI 303).
• DIN ISO 12240-1 (DIN 648), series K (wide shape).
• Maintenance-free.
• Suitable for high dynamic loads.
• With additional outer ring.

Volume Discount

Starting from^∗ ：	26.18 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spherical Bearings Series E, Steel, Re-lubricateable

MAEDLER

Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated. Treated with molybdenum disulfide. Bearing shell (outer ring) cut.
• DIN ISO 12240-1 (DIN 648), series E (slim shape).
• Re-lubricateable (from size 15 with lubrication hole).
• Initial lubrication before use is required.
• Suitable for high, alternating loads.
• Sliding speed up to 60 m/min.

Volume Discount

Starting from^∗ ：	8.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Sealing Cap for Angle Joints DIN 71802

MAEDLER

Material: Neoprene.
The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam.
Temperature range: -30ºC to +110ºC (short term 140ºC).

Volume Discount

Starting from^∗ ：	0.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Rod Ends GAW DIN ISO 12240-4 (DIN 648) Series E, Maintenance Free, External Thread

MAEDLER

Material housing: up to size 10 Free cutting steel, turned, zinc-plated; from size 12 heat-treated steel C45, forged, zinc-plated.
Material bearing: maintenance-free steel/PTFE bearing.
Material tribological pairing: hard chrome - steel/PTFE.
Application: For pivoting motions (alternating load). Not for higher speeds.
AR = External Right-hand thread. AL = External Left-hand thread.

Volume Discount

Starting from^∗ ：	14.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends PF with Integral Spherical Bearing

MAEDLER

Material rod end: Alloyed, case-hardened steel (forged) quenched and tempered, bearing race hardened, ground and lapped. Thread rolled/cut, surface zinc-plated and chromatised.
Material inner ring: Bearing steel hardened, precisely turned.
Lubricant: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC.
Special grease if required.
Short design with internal thread.
IR = Internal Right-hand thread. IL = Internal Left-hand thread.

Volume Discount

Starting from^∗ ：	71.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends GT DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, External Thread

MAEDLER

Material housing: Bores 6-12 mm, free cutting steel, turned, bores 14-30 mm C22 forged, zinc-plated.
Material outer ring: Free cutting steel with PTFE-lining.
Material inner ring: Roller bearing steel 100Cr6, hardened HRC 62 ±1, ground and polished.
For high, radial and axial alternating loads.
Sliding speeds up to 10 m/min.
Load tables pages 800 - 801.
AR = External Right-hand thread. AL = External Left-hand thread.

Volume Discount

Starting from^∗ ：	12.16 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends BR-R with Spherical Bearing DIN ISO 12240-4 Series K, Stainless Steel, Internal Thread

MAEDLER

Material rod end: Stainless steel, forged, hardened. Bearing race superfinished.
Material inner ring and rollers: Stainless steel, hardened, superfinished.
Lubricant: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC.
Special grease if required.
Basically without friction, long-term lubrication, sealed with cover plates, offers small dimensions, large pivoting angle and high load rating.
IR = Internal Right-hand thread. IL = Internal Left-hand thread

Volume Discount

Starting from^∗ ：	71.32 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 Series K, Stainless Steel, External Thread

MAEDLER

Material rod end: Stainless steel, forged, hardened. Bearing race superfinished, thread rolled.
Material inner ring and rollers: Stainless steel, hardened, superfinished.
Lubricant: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC.
Special grease if required.
Basically without friction, long-term lubrication, sealed with cover plates, offer small dimensions, large pivoting angle and high load rating.
AR = External Right-hand thread. AL = External Left-hand thread.

Volume Discount

Starting from^∗ ：	80.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle Joints DIN 71802, Stainless, with Mounted Sealing Cap

MAEDLER

Material: Stainless steel 1.4301 (AISI 304).
With mounted sealing cap from neopren, black.
Design CS: With threaded bolt, hexagon nut and circlip.
Right = Right-hand thread in the socket.
Left = Left-hand thread in the socket.

Volume Discount

Starting from^∗ ：	14.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Type
Tpyes of Rod End Bearing
Spherical Bearing Type
Main Body Material
Connection screw M
I.D. D(mm)
Connection screw shape
Connection screw direction
The material of a ball
Liner Material
Allowable Tilt Angle α(deg)
Lubricating Method


Brand	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER
Product Series	Axial Joints Similar to DIN 71802, Stainless	Axial Joints Similar to DIN 71802, Zinc-plated	Angle Joints DIN 71802, Zinc-plated, with Mounted Sealing Cap	Heavy-Duty Rod Ends GT DIN ISO 12240-4 (DIN 648), Series K, Maintenance Free, Internal Thread	Spherical Bearings Series E, Stainless Steel, Maintenance-free	Angle Joints DIN 71802, Zinc-plated	Heavy-Duty Rod Ends GS DIN ISO 12240-4 (DIN 648), Series K, Internal Thread	Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 (DIN 648), Series K, External Thread	Spherical Bearings Series K, Steel, Maintenance-free	Spherical Bearings Series K, Stainless Steel, Maintenance-free	Spherical Bearings Series E, Steel, Maintenance-free	Rod Ends GEW DIN ISO 12240-4 (DIN 648) Series E, Maintenance Free, Internal Thread	Heavy-Duty Rod Ends GT-R DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, Stainless Steel, Internal Thread	Heavy-Duty Rod Ends GT-R DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, Stainless Steel, External Thread	Angle Joints DIN 71802, Stainless	Heavy-Duty Rod Ends GS DIN ISO 12240-4 (DIN 648), Series K, External Thread	Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 (DIN 648), Series K, Internal Thread	Spherical Bearings Series K, Steel, Re-lubricateable, with Outer Ring	Spherical Bearings Series K, Steel, Re-lubricateable	Spherical Bearings Series K, Steel, Maintenance-free, with Outer Ring	Spherical Bearings Series K, Stainless Steel, Re-lubricateable, with Outer Ring	Spherical Bearings Series K, Stainless Steel, Re-lubricateable	Spherical Bearings Series K, Stainless Steel, Maintenance-free, with Outer Ring	Spherical Bearings Series E, Steel, Re-lubricateable	Sealing Cap for Angle Joints DIN 71802	Rod Ends GAW DIN ISO 12240-4 (DIN 648) Series E, Maintenance Free, External Thread	Heavy-Duty Rod Ends PF with Integral Spherical Bearing	Heavy-Duty Rod Ends GT DIN ISO 12240-4 (DIN 648) Series K, Maintenance Free, External Thread	Heavy-Duty Rod Ends BR-R with Spherical Bearing DIN ISO 12240-4 Series K, Stainless Steel, Internal Thread	Heavy-Duty Rod Ends BR with Spherical Bearing DIN ISO 12240-4 Series K, Stainless Steel, External Thread	Angle Joints DIN 71802, Stainless, with Mounted Sealing Cap
Starting from^∗	8.51 € *Unit price with basic configuration Volume Discount	2.03 € *Unit price with basic configuration Volume Discount	2.39 € *Unit price with basic configuration Volume Discount	12.16 € *Unit price with basic configuration Volume Discount	22.72 € *Unit price with basic configuration Volume Discount	2.01 € *Unit price with basic configuration Volume Discount	15.24 € *Unit price with basic configuration Volume Discount	49.61 € *Unit price with basic configuration Volume Discount	10.76 € *Unit price with basic configuration Volume Discount	22.65 € *Unit price with basic configuration Volume Discount	9.18 € *Unit price with basic configuration Volume Discount	14.30 € *Unit price with basic configuration Volume Discount	30.97 € *Unit price with basic configuration Volume Discount	30.97 € *Unit price with basic configuration Volume Discount	14.47 € *Unit price with basic configuration Volume Discount	15.24 € *Unit price with basic configuration Volume Discount	49.61 € *Unit price with basic configuration Volume Discount	14.36 € *Unit price with basic configuration Volume Discount	9.99 € *Unit price with basic configuration Volume Discount	14.73 € *Unit price with basic configuration Volume Discount	26.16 € *Unit price with basic configuration Volume Discount	22.64 € *Unit price with basic configuration Volume Discount	26.18 € *Unit price with basic configuration Volume Discount	8.01 € *Unit price with basic configuration Volume Discount	0.38 € *Unit price with basic configuration Volume Discount	14.30 € *Unit price with basic configuration Volume Discount	71.56 € *Unit price with basic configuration Volume Discount	12.16 € *Unit price with basic configuration Volume Discount	71.32 € *Unit price with basic configuration Volume Discount	80.08 € *Unit price with basic configuration Volume Discount	14.88 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Type	-	-	-	-	Spherical Bearing	-	-	-	Spherical Bearing	Spherical Bearing	Spherical Bearing	-	-	-	-	-	-	Spherical Bearing	Spherical Bearing	Spherical Bearing	Spherical Bearing	Spherical Bearing	Spherical Bearing	Spherical Bearing	-	-	-	-	-	-	-
Tpyes of Rod End Bearing	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Spherical Bearing Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Main Body Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Connection screw M	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
I.D. D(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Connection screw shape	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Connection screw direction	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
The material of a ball	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Liner Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Tilt Angle α(deg)	-	-	-	13 ～ 19	6 ～ 15	-	13 ～ 19	5 ～ 8.5	13 ～ 19	13 ～ 19	6 ～ 15	6 ～ 15	13 ～ 19	13 ～ 19	-	13 ～ 19	5 ～ 8.5	13 ～ 19	13 ～ 19	13 ～ 19	13 ～ 19	13 ～ 19	13 ～ 19	6 ～ 15	-	6 ～ 15	6.5 ～ 7	13 ～ 19	7 ～ 8.5	7 ～ 8.5	-
Lubricating Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Type
- Rod End Bearing
- Spherical Bearing
Clear

Tpyes of Rod End Bearing
- Standard
- Link Ball L
- Link Ball Straight
Enlarge image

Clear

Spherical Bearing Type
- Standard
- Pillow Block A
- Pillow Block C
- Pillow Block D
- Flange Type 4 Hole
Enlarge image

Clear

Main Body Material
EN 1.1191 Equiv.

Aluminum

Chrome Molybdenum Steel

High strength zinc alloy

Resin

Stainless Steel

Steel
Drawing

Clear

Connection screw M
M2

M3

M4

M5

M6

M8

M10

M12

M14

M16

M18

M20

M22

M24

M27

M30
Drawing

Clear

I.D. D(mm)
2

3

4

5

6

6.35

8

10

12

12.7

13

14

15

15.875

16

17

18

19

19.05

19.1

20

22

22.2

22.225

25

25.4

28

30

31.7

31.75

32

34.925

35

37

38.1

40

44

44.4

44.45

45

50

50.8

55

57.15

60

63

63.5

65

69.8

69.85

70

75

76.2

80

82.55

85

88.9

90

95

95.25

100

101.6

105

110

114.3

120

125

130

135

140

150

160

180

200

220

240

260

280

300
Drawing

Clear

Connection screw shape
- Male thread
- Female Thread
Clear

Connection screw direction
- Right Screw
- Left Screw
Clear

The material of a ball
Brass

Resin

Stainless Steel

Steel
Drawing

Clear

Liner Material
PTFE

Resin

Special Copper Alloy

Steel
Drawing

Clear

Allowable Tilt Angle α(deg)
1.1

1.3

1.4

1.6

1.7

1.8

1.9

2

2,5

2.1

2.3

2.7

3

4

4.5

5

6

6.5

7

7°

7,5°

7.5

8

8°

8,5°

8.5

9

10

10°

11

11°

11,5°

12

12°

12,5°

13

13°

14

14°

14,5°

15

15°

16

17

18

19

20

21

25

25°

29°

30

40
Clear

Lubricating Method
- Oil-Free
- Lubrication
Clear

Narrow search by specifying Brand

- MISUMI (6)
- Cost Efficient Products ()
- INA (78)
- ELGES (71)
- SKF (69)
- DURBAL (63)
- ZEN (60)
- NORELEM (33)
- KIPP (32)
- MAEDLER (31)
- GANTER (12)
- IGUS (10)
- THK (9)
- MINEBEA (6)
- NKE BEARINGS (5)
- STRUENING (5)
- TRUSCO NAKAYAMA (4)
- CCVI (3)
- IKO (3)
- OZAK (3)
- HALDER (2)
- REYHER (1)
- AIRTAC (1)
- ELESA (1)
- OILES (1)
Clear