NABEYA Locating Elements (for Positioning Parts / Manual Tightening)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Eccentric Height Cylinder
NABEYA
EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.
Compatible bolts are M12/16.Starting from∗ ： 64.47 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Reference Seat (Air Hole with Flange Provided)
NABEYA
Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.Starting from∗ ： 89.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Eccentric Rough Guide
NABEYA
A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.Starting from∗ ： 18.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide L-Plate for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.- Volume Discount
Starting from∗ ： 43.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Clamp Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 133.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Block
NABEYA
Material is Gusseisen mit Kugelgraphit450, and heat treatment is yakizen.
Useful for bulking up large workpieces and as a clamp table.Starting from∗ ： 544.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Locate Plate
NABEYA
Material is EN 1.1206 Equiv., Heat treatment is hardening, Surface treatment is black oxide coating.
Helps with positioning.Starting from∗ ： 116.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 35.09 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Guide Block (Straight Type)【2 Pieces Per Package】
NABEYA
Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.Starting from∗ ： 52.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 87.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Straight Pin
NABEYA
Slight chamfering is given for φ3 to φ5 and chamfering of C0.3 to 0.5 for φ6 or higher.- Volume Discount
Starting from∗ ： 9.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Cylinder
NABEYA
SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.Starting from∗ ： 31.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flange Locating Pin (Round
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)Starting from∗ ： 87.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Reference Seat (Flange Provided)
NABEYA
[Features]
· Specification with air holes can be used to verify seating (O-ring not included).
· The diameter of the workpiece support is large, allowing load from the top to be firmly supportedStarting from∗ ： 64.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Reference Seat (Round Seat)
NABEYA
Material is EN 1.7264 Equiv., Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).Starting from∗ ： 66.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Extension Tool for Q Lock (Side Type)
NABEYA
Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.- Volume Discount
Starting from∗ ： 101.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.Starting from∗ ： 130.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough Guide L-Plate for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.Starting from∗ ： 44.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rough Guide Pin for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.Starting from∗ ： 52.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Clamp Bushing
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 119.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Diamond Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 168.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Locating Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 145.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Locating Bushing
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 131.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock Coupling Socket
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.Starting from∗ ： 178.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Q Lock Coupling Plug
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.Starting from∗ ： 210.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 130.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 147.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 143.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Cylinder for Q Lock
NABEYA
Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.Starting from∗ ： 55.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.Starting from∗ ： 86.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough Guide Pin for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.Starting from∗ ： 47.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 699.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Block Guide Block【2 Pieces Per Package】
NABEYA
For installation, use E-660 socket screws (sold separately).- Volume Discount
Starting from∗ ： 34.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 55.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 116.75 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Guide Block (Open Type)【2 Pieces Per Package】
NABEYA
After setting the fixed object in the given position, place the guide block in the T-groove to position.Starting from∗ ： 53.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Guide Block (Stepped Type)【2 Pieces Per Package】
NABEYA
It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.Starting from∗ ： 104.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 55.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 1,412.33 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Flange Locating Pin (Diamond Pin)
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)Starting from∗ ： 102.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flange Locating Pin (Diamond Pin S)
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)Starting from∗ ： 120.37 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Flex Support
NABEYA
Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.Starting from∗ ： 988.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Locating Pin A Type (Self Cut Product)
NABEYA
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)Starting from∗ ： 29.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Locating Pin A Type (Finishing Product)
NABEYA
Outer diameters A and B have ground finish (finished product)Starting from∗ ： 80.25 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Locating Pin B Type (Self Cut Product)
NABEYA
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)Starting from∗ ： 46.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 64.47 € *Unit price with basic configuration | 89.57 € *Unit price with basic configuration | 18.27 € *Unit price with basic configuration | 43.87 € *Unit price with basic configuration | 133.45 € *Unit price with basic configuration | 544.52 € *Unit price with basic configuration | 116.12 € *Unit price with basic configuration | 35.09 € *Unit price with basic configuration | 52.15 € *Unit price with basic configuration | 87.78 € *Unit price with basic configuration | 9.60 € *Unit price with basic configuration | 31.82 € *Unit price with basic configuration | 87.36 € *Unit price with basic configuration | 64.64 € *Unit price with basic configuration | 66.39 € *Unit price with basic configuration | 101.31 € *Unit price with basic configuration Volume Discount | 130.64 € *Unit price with basic configuration | 44.24 € *Unit price with basic configuration | 52.68 € *Unit price with basic configuration | 119.33 € *Unit price with basic configuration | 168.29 € *Unit price with basic configuration | 145.69 € *Unit price with basic configuration | 131.57 € *Unit price with basic configuration | 178.16 € *Unit price with basic configuration | 210.17 € *Unit price with basic configuration | 130.25 € *Unit price with basic configuration | 147.58 € *Unit price with basic configuration | 143.43 € *Unit price with basic configuration | 55.12 € *Unit price with basic configuration | 86.79 € *Unit price with basic configuration | 47.29 € *Unit price with basic configuration | 699.84 € *Unit price with basic configuration | 34.05 € *Unit price with basic configuration | 55.45 € *Unit price with basic configuration | 116.75 € *Unit price with basic configuration | 53.00 € *Unit price with basic configuration | 104.73 € *Unit price with basic configuration | 55.17 € *Unit price with basic configuration | 1,412.33 € *Unit price with basic configuration | 102.18 € *Unit price with basic configuration | 120.37 € *Unit price with basic configuration | 988.05 € *Unit price with basic configuration | 29.41 € *Unit price with basic configuration | 80.25 € *Unit price with basic configuration | 46.39 € *Unit price with basic configuration |
| Min. Shipping Days ： | 10 Days | 5 Days | 5 Days | 6 Days | 5 Days | 8 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 6 Days | 8 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 8 Days | 6 Days | 5 Days | 8 Days | 6 Days | 5 Days | 8 Days | 8 Days | 5 Days | 8 Days | 8 Days | 8 Days | 7 Days | 8 Days |
Loading...
Categories related to Locating Elements (for Positioning Parts / Manual Tightening)
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.