Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Type
  • Tillverkare
  • CAD

    • Locating Units

    Positioning unit parts are parts used to correct or align mold die positions. They include parts enabling easy positioning of workpieces in the form of thin plates such as by preventing backflow of pallets on a transport line, positioning buckets in transport equipment, preventing falls of transported items or preventing backflow of transport units. They also include parts used to secure the covers of jigs or items with mechanisms for single-action mounting of bar-shaped parts, and parts used to lock openings. Other parts in this category include fasteners that are used instead of bolts and enable tool-free single-action attachment mounting/removal or jig replacement during equipment setup changes. Since they can be easily fastened, they can be fastened to a uniform tightness and eliminate variations in fastening strength. Some parts enable single-action switching between clamping and unclamping, and show at a glance whether they are fastened from the orientation of the knob.
      132 poster
      * Information om dagar till leverans, fraktkostnader och priser
      Lista
      Foto
      Jämför specifikationer
    • 1
    • 2
    • 3
    • Nästa
      • Auto-Latch
        • Volume Discount

        MISUMI

        Auto-Latch

        CAD:
        2D
        /3D
        Type
        Support Unit
        Ordinarie pris (exklusive MOMS):
        18.60 €～
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Skicka samma dag går att få
        Konfigurera
      • Feed Fingers
        • KAMPANJFÖRSÄLJNING
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Feed Fingers

        CAD:
        2D
        /3D
        Type
        Support Unit
        Ordinarie pris (exklusive MOMS):
        Specialpris
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • Pneumatic separator with damping
        • Volume Discount

        ASUTEC

        Pneumatic separator with damping

        Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).
        Mer information
        CAD:
        3D
        Type
        -
        Ordinarie pris (exklusive MOMS):
        255.57 €～
        Ordinarie avsändningsdatum:
        10 arbetsdagar
        Konfigurera
      • Pneumatic separator without damping
        • Volume Discount

        ASUTEC

        Pneumatic separator without damping

        Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).
        Mer information
        CAD:
        3D
        Type
        -
        Ordinarie pris (exklusive MOMS):
        91.45 €～
        Ordinarie avsändningsdatum:
        7 arbetsdagar
        Konfigurera
      • Quick Shaft Clamp (QSC)
        • Volume Discount

        IMAO CORPORATION

        Quick Shaft Clamp (QSC)

        Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.
        Mer information
        CAD:
        2D
        /3D
        Type
        Clamp Unit
        Ordinarie pris (exklusive MOMS):
        42.18 €～
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • Feed Fingers / Economy
        • Volume Discount

        MISUMI

        Feed Fingers / Economy

        CAD:
        2D
        /3D
        Type
        Support Unit
        Ordinarie pris (exklusive MOMS):
        16.19 €～
        Ordinarie avsändningsdatum:
        Lagervara: 1 arbetsdag
        Vissa artiklar kan skickas samma dag
        Konfigurera
      • Electrical separator with damping
        • Volume Discount

        ASUTEC

        Electrical separator with damping

        Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savings
        Mer information
        CAD:
        3D
        Type
        -
        Ordinarie pris (exklusive MOMS):
        1,166.29 €～
        Ordinarie avsändningsdatum:
        15 arbetsdagar
        Konfigurera
      • Pneumatic angle damper
        • Volume Discount

        ASUTEC

        Pneumatic angle damper

        Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.
        Mer information
        CAD:
        3D
        Type
        -
        Ordinarie pris (exklusive MOMS):
        259.33 €～
        Ordinarie avsändningsdatum:
        10 arbetsdagar
        Konfigurera
      • Push button latches stainless steel, Form A, with head (K1562)

          KIPP

          Push button latches stainless steel, Form A, with head (K1562)

          [Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: with head
          Mer information
          CAD:
          2D
          /3D
          Type
          -
          Ordinarie pris (exklusive MOMS):
          40.43 €
          Ordinarie avsändningsdatum:
          4 arbetsdagar
          Konfigurera
        • Quarter-turn clamp locks stainless steel, knob plastic (K1061)

            KIPP

            Quarter-turn clamp locks stainless steel, knob plastic (K1061)

            [Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: plastic[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws included・Main material: steel
            Mer information
            CAD:
            2D
            /3D
            Type
            -
            Ordinarie pris (exklusive MOMS):
            32.38 €～
            Ordinarie avsändningsdatum:
            4 arbetsdagar
            Konfigurera
          • Thumb Turn Clamper (QCTH, QCTHL)
            • Volume Discount

            IMAO CORPORATION

            Thumb Turn Clamper (QCTH, QCTHL)

            Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.
            Mer information
            CAD:
            2D
            /3D
            Type
            Single-Action Mounted Jig
            Ordinarie pris (exklusive MOMS):
            59.12 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Pneumatic positioning unit
            • Volume Discount

            ASUTEC

            Pneumatic positioning unit

            Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).
            Mer information
            CAD:
            3D
            Type
            -
            Ordinarie pris (exklusive MOMS):
            207.97 €～
            Ordinarie avsändningsdatum:
            10 arbetsdagar
            Konfigurera
          • Latch (08150)

              NORELEM

              Latch (08150)

              · Modular system for drilling jigs· Locking system for drilling plates
              Mer information
              Type
              Support Unit
              Ordinarie pris (exklusive MOMS):
              66.79 €～
              Ordinarie avsändningsdatum:
              4 arbetsdagar
              Konfigurera
            • Push button latches stainless steel, Form B, without head (K1562)

                KIPP

                Push button latches stainless steel, Form B, without head (K1562)

                [Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: without head
                Mer information
                CAD:
                2D
                /3D
                Type
                -
                Ordinarie pris (exklusive MOMS):
                38.59 €
                Ordinarie avsändningsdatum:
                4 arbetsdagar
                Konfigurera
              • Linear Stop Motion (LSM)

                  IMAO CORPORATION

                  Linear Stop Motion (LSM)

                  Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.[Features]· Easy operation and secure locking.· As clamps with internal spring, clamping is always regular.· As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.· Lever direction can be changed by 90° pitch
                  Mer information
                  CAD:
                  2D
                  /3D
                  Type
                  -
                  Ordinarie pris (exklusive MOMS):
                  178.78 €～
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Clamping plates recessed for quarter-turn clamp locks (K1062)

                    KIPP

                    Clamping plates recessed for quarter-turn clamp locks (K1062)

                    [Specifications]・Main material: stainless steel, steel・Surface finish body: bright, nickel-plated・D=diameter(mm): 5, 8[Features]・Form B mounting option for plate thickness over 10mm・Fastening screws included
                    Mer information
                    CAD:
                    2D
                    /3D
                    Type
                    -
                    Ordinarie pris (exklusive MOMS):
                    14.80 €～
                    Ordinarie avsändningsdatum:
                    Lagervara: 1 arbetsdag
                    Vissa artiklar kan skickas samma dag
                    Konfigurera
                  • Work Detection Units

                      MISUMI

                      Work Detection Units

                      [Features] It can be used in places that cannot be directly detected by proximity sensors.
                      Mer information
                      CAD:
                      2D
                      /3D
                      Type
                      Workpiece Detection Unit
                      Ordinarie avsändningsdatum:
                      7 arbetsdagar
                      Konfigurera
                    • Pneumatic separator for roller conveyor system with damping
                      • Volume Discount

                      ASUTEC

                      Pneumatic separator for roller conveyor system with damping

                      The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.
                      Mer information
                      CAD:
                      3D
                      Type
                      -
                      Ordinarie pris (exklusive MOMS):
                      766.70 €～
                      Ordinarie avsändningsdatum:
                      10 arbetsdagar
                      Konfigurera
                    • Locating cylinder stainless steel, pneumatic (K1738)

                        KIPP

                        Locating cylinder stainless steel, pneumatic (K1738)

                        [Specifications]・Main material: stainless steel・Component material: nitrile rubber・D=diameter(mm): 19[Features]・Suitable for automation processes・Pneumatic actuation・Compact design・Rust-free
                        Mer information
                        Type
                        -
                        Ordinarie pris (exklusive MOMS):
                        104.08 €
                        Ordinarie avsändningsdatum:
                        4 arbetsdagar
                        Konfigurera
                      • Quarter-turn clamp locks, flat stainless steel (K1061)

                          KIPP

                          Quarter-turn clamp locks, flat stainless steel (K1061)

                          [Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: stainless steel[Features]・Locking element for connecting two separate plates・Ideal for restricted spaces・Click signal when locked・Form A mounting option: for plate thickness 6 or 12mm・Fastening screws included
                          Mer information
                          CAD:
                          2D
                          /3D
                          Type
                          -
                          Ordinarie pris (exklusive MOMS):
                          42.56 €～
                          Ordinarie avsändningsdatum:
                          4 arbetsdagar
                          Konfigurera
                        • Quick Shaft Clamp (Air Operation) (QSCA)
                          • Volume Discount

                          IMAO CORPORATION

                          Quick Shaft Clamp (Air Operation) (QSCA)

                          Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.
                          Mer information
                          CAD:
                          2D
                          /3D
                          Type
                          Clamp Unit
                          Ordinarie pris (exklusive MOMS):
                          118.07 €～
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • Quarter turn latches, with cross head (K1730)

                            KIPP

                            Quarter turn latches, with cross head (K1730)

                            · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)
                            Mer information
                            CAD:
                            2D
                            /3D
                            Type
                            -
                            Ordinarie pris (exklusive MOMS):
                            2.82 €
                            Ordinarie avsändningsdatum:
                            4 arbetsdagar
                            Konfigurera
                          • Quarter turn latches, with star grip (K1730)

                              KIPP

                              Quarter turn latches, with star grip (K1730)

                              · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)
                              Mer information
                              CAD:
                              2D
                              /3D
                              Type
                              -
                              Ordinarie pris (exklusive MOMS):
                              5.65 €
                              Ordinarie avsändningsdatum:
                              4 arbetsdagar
                              Konfigurera
                            • Quarter-turn latches steel rotary knob, plastic (K1561)

                                KIPP

                                Quarter-turn latches steel rotary knob, plastic (K1561)

                                · Locking element for connecting two separate plates· Click signal when locked· Ideal where space is restricted:· Mounting option for plate thickness 6 to 14 mm· Fastening screws included
                                Mer information
                                CAD:
                                2D
                                /3D
                                Type
                                -
                                Ordinarie pris (exklusive MOMS):
                                37.67 €～
                                Ordinarie avsändningsdatum:
                                4 arbetsdagar
                                Konfigurera
                              • Pneumatic accelerator module
                                • Volume Discount

                                ASUTEC

                                Pneumatic accelerator module

                                Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.
                                Mer information
                                CAD:
                                3D
                                Type
                                -
                                Ordinarie pris (exklusive MOMS):
                                290.66 €～
                                Ordinarie avsändningsdatum:
                                19 arbetsdagar
                                Konfigurera
                              • Locating cylinder Ball Lock (K0935)

                                  KIPP

                                  Locating cylinder Ball Lock (K0935)

                                  · Mechanical positioning and clamping system· Various sizes· High retaining forces· For different thicknesses of clamping plate
                                  Mer information
                                  Type
                                  -
                                  Ordinarie pris (exklusive MOMS):
                                  101.52 €～
                                  Ordinarie avsändningsdatum:
                                  4 arbetsdagar
                                  Konfigurera
                                • Lock bottom parts for quarter turn latches (K1732)

                                    KIPP

                                    Lock bottom parts for quarter turn latches (K1732)

                                    · Quick assembly· Vibration-resistant and tolerance-compensating· Suitable for all locking pins
                                    Mer information
                                    CAD:
                                    2D
                                    /3D
                                    Type
                                    -
                                    Ordinarie pris (exklusive MOMS):
                                    1.39 €
                                    Ordinarie avsändningsdatum:
                                    Lagervara: 1 arbetsdag
                                    Skicka samma dag går att få
                                    Konfigurera
                                  • Quarter turn latches, with knurled head (K1730)

                                      KIPP

                                      Quarter turn latches, with knurled head (K1730)

                                      · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)
                                      Mer information
                                      CAD:
                                      2D
                                      /3D
                                      Type
                                      -
                                      Ordinarie pris (exklusive MOMS):
                                      5.65 €
                                      Ordinarie avsändningsdatum:
                                      4 arbetsdagar
                                      Konfigurera
                                    • Quarter-turn clamp lock steel, rotary knob plastic (K1558)

                                        KIPP

                                        Quarter-turn clamp lock steel, rotary knob plastic (K1558)

                                        · Locking element for connecting two separate plates· With retractable shank, ideal for places where space is limited· Click signal when locked· Mounting option for plate thickness 6 to 14 mm· Fastening screws included
                                        Mer information
                                        CAD:
                                        2D
                                        /3D
                                        Type
                                        -
                                        Ordinarie pris (exklusive MOMS):
                                        34.91 €～
                                        Ordinarie avsändningsdatum:
                                        4 arbetsdagar
                                        Konfigurera
                                      • Quarter-turn clamp locks stainless steel, knob stainless steel (K1559)

                                          KIPP

                                          Quarter-turn clamp locks stainless steel, knob stainless steel (K1559)

                                          · High clamping forces up to 400 N· Ideal where space is restricted:· Click signal when locked· Fastening screws included· Mounting option for plate thickness 6 to 20 mm
                                          Mer information
                                          CAD:
                                          2D
                                          /3D
                                          Type
                                          -
                                          Ordinarie pris (exklusive MOMS):
                                          71.68 €
                                          Ordinarie avsändningsdatum:
                                          4 arbetsdagar
                                          Konfigurera
                                        • Pneumatic return stop
                                          • Volume Discount

                                          ASUTEC

                                          Pneumatic return stop

                                          Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.
                                          Mer information
                                          CAD:
                                          3D
                                          Type
                                          -
                                          Ordinarie pris (exklusive MOMS):
                                          59.52 €～
                                          Ordinarie avsändningsdatum:
                                          5 arbetsdagar
                                          Konfigurera
                                        • Locating cylinder with quick clamping system (K0935)

                                            KIPP

                                            Locating cylinder with quick clamping system (K0935)

                                            [Specifications]・Main material: high carbon steel・Component material: ball-bearing steel・D=pin diameter(mm): 13, 16,10[Features]・Fast opening and closing・Mechanical positioning and clamping system・Various sizes・High retaining forces・For different thicknesses of clamping plate
                                            Mer information
                                            Type
                                            -
                                            Ordinarie pris (exklusive MOMS):
                                            107.53 €～
                                            Ordinarie avsändningsdatum:
                                            4 arbetsdagar
                                            Konfigurera
                                          • Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

                                              KIPP

                                              Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

                                              [Specifications]・Main material: stainless steel・Component material: stainless steel・D=diameter(mm): 5, 8[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws included
                                              Mer information
                                              CAD:
                                              2D
                                              /3D
                                              Type
                                              -
                                              Ordinarie pris (exklusive MOMS):
                                              40.71 €～
                                              Ordinarie avsändningsdatum:
                                              4 arbetsdagar
                                              Konfigurera
                                            • Quarter-turn clamp locks flat (05591)

                                                NORELEM

                                                Quarter-turn clamp locks flat (05591)

                                                · Locking element for connecting two separate plates· Ideal for restricted spaces· Click signal when locked· Form A mounting option: for plate thickness 6 or 12 mm· Fastening screws included
                                                Mer information
                                                Type
                                                Clamp Unit
                                                Ordinarie pris (exklusive MOMS):
                                                52.59 €～
                                                Ordinarie avsändningsdatum:
                                                4 arbetsdagar
                                                Konfigurera
                                              • Locating cylinders with quick clamping system (03153)

                                                  NORELEM

                                                  Locating cylinders with quick clamping system (03153)

                                                  · Fast opening and closing· Mechanical positioning and clamping system· Various sizes· High retaining forces· For different thicknesses of clamping plate
                                                  Mer information
                                                  Type
                                                  Clamp Unit
                                                  Ordinarie pris (exklusive MOMS):
                                                  133.05 €～
                                                  Ordinarie avsändningsdatum:
                                                  4 arbetsdagar
                                                  Konfigurera
                                                • Positioning units, spring-loaded (K0917)

                                                    KIPP

                                                    Positioning units, spring-loaded (K0917)

                                                    · Positioning and supporting of workpieces with boreholes· Form A: locating and support element· Form B: locating element
                                                    Mer information
                                                    CAD:
                                                    2D
                                                    /3D
                                                    Type
                                                    -
                                                    Ordinarie pris (exklusive MOMS):
                                                    125.90 €～
                                                    Ordinarie avsändningsdatum:
                                                    4 arbetsdagar
                                                    Konfigurera
                                                  • Positioning cones, Steel, for centring units (K1627)

                                                      KIPP

                                                      Positioning cones, Steel, for centring units (K1627)

                                                      · Extremely high repeat accuracy of <0.003 mm· No tilting when joining· Not sensitive to dirt and splinters· Easy handling
                                                      Mer information
                                                      CAD:
                                                      2D
                                                      /3D
                                                      Type
                                                      -
                                                      Ordinarie pris (exklusive MOMS):
                                                      47.08 €
                                                      Ordinarie avsändningsdatum:
                                                      4 arbetsdagar
                                                      Konfigurera
                                                    • Clamping plates steel for quarter-turn clamp locks (K1560)

                                                        KIPP

                                                        Clamping plates steel for quarter-turn clamp locks (K1560)

                                                        · Fastening screws included· Mounting option for plate thickness starting from 9 mm· Accessory for quarter-turn clamp lock K1559
                                                        Mer information
                                                        CAD:
                                                        2D
                                                        /3D
                                                        Type
                                                        -
                                                        Ordinarie pris (exklusive MOMS):
                                                        15.62 €
                                                        Ordinarie avsändningsdatum:
                                                        4 arbetsdagar
                                                        Konfigurera
                                                      • Quarter turn latches, with slot head (K1730)

                                                          KIPP

                                                          Quarter turn latches, with slot head (K1730)

                                                          · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)
                                                          Mer information
                                                          CAD:
                                                          2D
                                                          /3D
                                                          Type
                                                          -
                                                          Ordinarie pris (exklusive MOMS):
                                                          2.82 €
                                                          Ordinarie avsändningsdatum:
                                                          4 arbetsdagar
                                                          Konfigurera
                                                        • Electric return stop
                                                          • Volume Discount

                                                          ASUTEC

                                                          Electric return stop

                                                          Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops "ASREL" can be lowered electrically for the reversing operation of the conveyor.
                                                          Mer information
                                                          CAD:
                                                          3D
                                                          Type
                                                          -
                                                          Ordinarie pris (exklusive MOMS):
                                                          455.36 €～
                                                          Ordinarie avsändningsdatum:
                                                          15 arbetsdagar
                                                          Konfigurera
                                                        • Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

                                                            KIPP

                                                            Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

                                                            [Specifications]・Main material: plastic, stainless steel・Component material: silicon・Component colour: blueCable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)
                                                            Mer information
                                                            CAD:
                                                            2D
                                                            /3D
                                                            Type
                                                            -
                                                            Ordinarie pris (exklusive MOMS):
                                                            9.53 €～
                                                            Ordinarie avsändningsdatum:
                                                            4 arbetsdagar
                                                            Konfigurera
                                                          • Locating cylinder stainless steel Ball Lock (K1474)

                                                              KIPP

                                                              Locating cylinder stainless steel Ball Lock (K1474)

                                                              · Reduced machine setup times· Simple application
                                                              Mer information
                                                              Type
                                                              -
                                                              Ordinarie pris (exklusive MOMS):
                                                              123.35 €～
                                                              Ordinarie avsändningsdatum:
                                                              4 arbetsdagar
                                                              Konfigurera
                                                            • Quarter-turn clamp locks stainless steel, knob plastic (K1559)

                                                                KIPP

                                                                Quarter-turn clamp locks stainless steel, knob plastic (K1559)

                                                                · High clamping forces up to 400 N· Ideal where space is restricted:· Click signal when locked· Fastening screws included· Mounting option for plate thickness 6 to 20 mm
                                                                Mer information
                                                                CAD:
                                                                2D
                                                                /3D
                                                                Type
                                                                -
                                                                Ordinarie pris (exklusive MOMS):
                                                                62.49 €
                                                                Ordinarie avsändningsdatum:
                                                                4 arbetsdagar
                                                                Konfigurera
                                                              • Quarter turn latches, with knurled head (05592-50)

                                                                  NORELEM

                                                                  Quarter turn latches, with knurled head (05592-50)

                                                                  · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)
                                                                  Mer information
                                                                  Type
                                                                  Support Unit
                                                                  Ordinarie pris (exklusive MOMS):
                                                                  6.98 €
                                                                  Ordinarie avsändningsdatum:
                                                                  4 arbetsdagar
                                                                  Konfigurera
                                                                • Locating cylinder Ball Lock (03153)

                                                                    NORELEM

                                                                    Locating cylinder Ball Lock (03153)

                                                                    · Mechanical positioning and clamping system· Various sizes· High retaining forces· For different thicknesses of clamping plate
                                                                    Mer information
                                                                    Type
                                                                    Support Unit
                                                                    Ordinarie pris (exklusive MOMS):
                                                                    125.59 €～
                                                                    Ordinarie avsändningsdatum:
                                                                    4 arbetsdagar
                                                                    Konfigurera
                                                                • 1
                                                                • 2
                                                                • 3
                                                                • Nästa

                                                                  • Nyligen visade produkter

                                                                  Kategorier som hör till Locating Units