Base
75 poster
* Information om dagar till leverans, fraktkostnader och priser
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Two-way connector clamps / Aluminium / GN 131 / 2, with 2 Stainless Steel-clamping screws DIN 912
The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):21.96 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
SURUGA SEIKI
Can load, 360° rotate, and fix at any position Opt Station holders. Can be easily rotated, making it ideal for routing optical circuits.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):110.47 €Ordinarie avsändningsdatum:6 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Two-way connector clamps / Aluminium / GN 132 / 2, with 2 Stainless Steel-clamping screws DIN 912
The clamping bores of GN 132 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):25.74 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
T-angle connector clamps / Aluminium / GN 192 / 2, with 2 Stainless Steel-clamping screws DIN 912
The clamping bores of GN 192 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):26.42 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- Volume Discount
GANTER
Two-way connector clamps / Aluminium / GN 133 / 2, with 2 Stainless Steel-clamping screws DIN 912
The clamping bores of GN 133 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):25.64 €～Ordinarie avsändningsdatum:3 arbetsdagar
SURUGA SEIKI
A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.[Features]■ [A40M/A41M] A stainless steel rod for mounting optical parts.· A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.■ [A40/A41/A42] A stainless steel rod for mounting optical parts.· Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.· There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.Mer informationKonfigureraOrdinarie avsändningsdatum:10 arbetsdagar
SURUGA SEIKI
Aluminum Breadboard (for M4 / for M6)
Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.[Features]· Laboratory units can be configured in saving space installations by placing on existing laboratory benches.· Units configured on the breadboard can be moved to and stored at any location.· Made of aluminum and the surface is anodized. It also comes with a handle which is useful for transportation.· The top surface is configured of a 25 mm matrix of tapped holes for both M4 and M6 hole types. All holes are through holes.· Features M6 bolt holes for fixing to vibration removal boards.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):552.91 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
[Features]· An aluminum breadboard for Opt Station 40 mm stages.· Includes a handle so that assembled optical systems can be carried as is.· The upper surface features 16 mm M3 tapped holes.· Flatness: 0.20 mm or less.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):735.61 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Stock
SURUGA SEIKI
Allows for the easy modularization of optical systems. [Features]· The smallest breadboard in the product line-up.· Features a modularized Opt Station and 40 mm stage combination etc. Can be fixed to the top of vibration removal boards and breadboards and easily moved and stored.· The top surface is configured of a 25 mm matrix of tapped holes for the M6 type, and 8 mm or 16 mm for the M3 type. All holes are through-holes.· Features M6 bolt holes for fixing to vibration removal boards etc.· Allows for the easy modularization of optical systems configured with Opt Stations and a 40 mm stage, etc.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):198.55 €～Ordinarie avsändningsdatum:5 arbetsdagar
- Volume Discount
CHUO PRECISION INDUSTRIAL
Rotation Type Cross Clamp for Light Loads
[Features]· Used to retain holder shafts and poles at free intersecting angles.· Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):45.55 €～Ordinarie avsändningsdatum:6 arbetsdagar
CHUO PRECISION INDUSTRIAL
[Features]· A simple type aluminum laboratory table.· Because of its small size, devices and optical type systems can be moved while assembled.· The top surface has M4 tapped holes at a pitch of 25 mm as standard.· Includes a handle for transportationMer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):547.97 €～Ordinarie avsändningsdatum:16 arbetsdagar
- Volume Discount
GANTER
Stainless Steel-Two-way connector clamps
The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):45.94 €～Ordinarie avsändningsdatum:7 arbetsdagar
SURUGA SEIKI
ø12 or ø20 rods can be fixed and freely positioned. Uses cam type fixing, meaning that three joints can handily be fixed using a single clamp knob.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):245.69 €～Ordinarie avsändningsdatum:6 arbetsdagar
- KAMPANJFÖRSÄLJNING
- Volume Discount
SURUGA SEIKI
The base plate is compatible with a variety of stages. [Features]· A plate for connecting stages and holders to vibration removal boards with M6 tapped holes etc.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):34.53 €～Ordinarie pris (exklusive MOMS):SpecialprisOrdinarie avsändningsdatum:Lagervara: 1 arbetsdagVissa artiklar kan skickas samma dag
- Volume Discount
SURUGA SEIKI
Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position. [Features]· Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):27.81 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Base for Optical Circuit Switching
[Features]· Can be used for switching optical circuits by loading and sliding the Opt Station holder (reproducibility reference value: 10 seconds or so).· The slide-position is fixed by magnet. As such there is no locking mechanism.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):211.83 €Ordinarie avsändningsdatum:10 arbetsdagar
- Volume Discount
SURUGA SEIKI
Spacer □ 40 for Optical Axis Height Alignment
[Features]· A 40 mm spacer for aligning the optical axis.· Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc.· Features external dimensions of 40 × 40 mm. Can be used for 40 stages or Opt Station holders.· Available in dimensions of 10 mm to 50 mm in increments of 5 mm (by combining spacers).· More detailed adjustment is possible by using combinations of A50-H, R, J, V, W, X, and Y.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):26.55 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Rotation Type (Handle Type) Cross Clamp
[Features]· A cross clamp for heavy loads.· Poles and rods can be rotated to any angle and then fixed.· Fixing is done using a split clamping method.· Features a slitted fixing section. Twist the clamp section to securely fix the object.· There are three types available for different combinations of applicable diameters.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):138.28 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Rotation Type (Hexagonal Type) Cross Clamp
[Features]· A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.· Poles and rods can be rotated to any angle and then fixed.· Fixing is done using a split clamping method.· Fixing is done by tightening the M5 bolts.· Features a slitted fixing section. Twist the clamp section to securely fix the object.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):126.17 €Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Fixed Type (Hexagonal Type) Cross Clamp
[Features]· A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.· Poles or rods can be orthogonally connected.· Fixing is done using split clamping.· Fixing is done by tightening the M5 bolts.· Features a slitted fixing section. Twist the clamp section to securely fix the object.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):62.93 €Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
CHUO PRECISION INDUSTRIAL
The adapter is used for conversions when using shafts or poles of the same thread diameter but different pitches etc.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):33.97 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
CHUO PRECISION INDUSTRIAL
[Features]· A magnet stand that attaches using magnets.· For switching attraction (magnetic force) between ON and OFF, rotate or slide the lever.· The center section features M6 tapped holes and a single M16P1 tapped hole. These can be used for mounting a variety of stands.· Stages can be mounted using the M2 or M4 tapped holes.· The value of the attraction force is for a polished surface.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):134.36 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
GANTER
Flanged two-way connector clamps, multi part assembly
The clamping bores of the flanged two-way connector clamps GN 141 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The square designs are also suitable for use in profile systems.Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20. The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):48.34 €～Ordinarie avsändningsdatum:7 arbetsdagar
- Volume Discount
GANTER
GN 135.1 Linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.The square s2 of the linear actuator connector is supplied not machined in the standard design.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):121.54 €～Ordinarie avsändningsdatum:7 arbetsdagar
- Volume Discount
GANTER
Stainless Steel-T-angle connector clamps
The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The standard clamping screws are socket cap screws DIN 912.They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).Mer informationKonfigureraOrdinarie pris (exklusive MOMS):45.78 €～Ordinarie avsändningsdatum:7 arbetsdagar
SURUGA SEIKI
The length, diameter, and tap can be configured from the table. Please ask for special taps and special outer diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer informationKonfigureraOrdinarie avsändningsdatum:13 arbetsdagar
SURUGA SEIKI
By using this rod, holders and other similar items can be set to various optical axis heights without having to purchase new rods. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer informationKonfigureraOrdinarie avsändningsdatum:10 arbetsdagar
SURUGA SEIKI
Variable Height Pole Set (M6 Tip)
Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer informationKonfigureraOrdinarie avsändningsdatum:13 arbetsdagar
- Volume Discount
SURUGA SEIKI
Can be attached to a rod. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):41.32 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Aluminum Breadboard (Handle for A64)
Laboratory units can be configured in saving space installations by placing on existing laboratory benches. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer informationKonfigureraOrdinarie pris (exklusive MOMS):75.77 €Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Lightweight, and rust-proof. Can be used for constructing a linear optical experiment system using a dedicated carrier. [Features]· Can be directly mounted to a vibration removal board using M6 bolts.· Bench Width: 50 mm, Height: 25 mm. Low optical axis and high stability.· Products with a /ST at the end of the model number include a scale.· For total loads applied onto the optical bench, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 10 times the weight of the bench itself.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):142.25 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
A plate for attaching to stage units and positioning tilt stages. Used when stage units are interfering with each other, making it difficult to place them in close proximity to each other.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):124.32 €Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Holds items via a collet type tightening method. This ensures excellent stability and more effective holding. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):114.91 €～Ordinarie avsändningsdatum:11 arbetsdagar
SURUGA SEIKI
Can load and slide Opt Station holders. Can be used for adjusting the position shift of mirror holders, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):66.46 €Ordinarie avsändningsdatum:9 arbetsdagar
SURUGA SEIKI
[Features]· A stand for fixing rods with a length of 10 mm.· Also includes a 10 mm length rod.· Can be used as the rod stand for the Opt Station holder, fixing it in any position (360°).Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):68.99 €Ordinarie avsändningsdatum:11 arbetsdagar
SURUGA SEIKI
A carrier for A10 connections. Used for fixing optical benches to bases such as those on optical surface plates etc. A magnet plate may be required depending on the base. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):117.13 €Ordinarie avsändningsdatum:6 arbetsdagar- KonfigureraOrdinarie pris (exklusive MOMS):35.06 €Ordinarie avsändningsdatum:6 arbetsdagar
- KonfigureraOrdinarie pris (exklusive MOMS):22.78 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
[Features]· Switch the lever ON/OFF to attach or detach to or from magnetized vibration removal boards and laboratory tables etc.· Allows for fixing in any position, regardless of the position of the tapped holes.· A variety of types are available; from highly magnetized types to thin types. Select the most appropriate product to match the intended application.· Rod stands etc., can be mounted with mounting screws of A22-1: M16P=1· Use an adapter plate to mount □40 mm and □60 mm stages.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):87.68 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
SURUGA SEIKI
Thin, lightweight, and rust-proof. Can be used for constructing a linear and low-optical axis optical experiment system using a dedicated carrier. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):41.39 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Carrier for Mini-Optical Benches
[Features]· A carrier for A16 optical benches.· For loads applied onto the optical bench carrier, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 20 times the weight of the carrier itself.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):34.53 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
SURUGA SEIKI
A stand used for adjusting the height of holders, etc. Rods can be securely fixed in place using two wire contacts and the point contact for the clamp screw. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):31.85 €～Ordinarie avsändningsdatum:6 arbetsdagar
SURUGA SEIKI
Upward / Downward Micro Movement Rod Stand
[Features]· A rod stand capable of upward and downward micro movements.· After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.· After adjusting, fix using the vertical fixing clamps.· The range for micro movements is 10 mm.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):138.53 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
SURUGA SEIKI
A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):21.49 €～Ordinarie avsändningsdatum:6 arbetsdagar
- Volume Discount
SURUGA SEIKI
A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.Mer information- CAD:
- 2D
KonfigureraOrdinarie pris (exklusive MOMS):41.72 €～Ordinarie avsändningsdatum:6 arbetsdagar
