Other Shapes

158

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Promotional pricing

Stretcher Unit

NTN

A combination grooved steel frame and bearing unit.
Can be used for belt and chain adjustments in areas where free movement of the axis is required.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	55.39 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing SB

NIPPON PILLOW BLOCK

The SB type bearing is an oil free grease-sealed deep-groove ball bearing with an outer ring that has a spherical surface on the outer diameter and a wide inner ring that has cylindrical holes with set screws included.

A lightweight bearing suitable for use with light to normal loads, that can be easily and securely attached to the shaft using the 2 inner ring set screws with a 120° interval.

Select to compare

Configure now
Starting from^∗ ：	10.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Pilot

MISUMI

[Features] The mounting surface is marked to facilitate positioning during installation and simplify work.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Bearing Unit Single Unit Cover

NTN

A dust-proof cover for use with bearing units. Insert into a unit to use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Ball Bearing for Units

NTN

Bearing product for use with bearing units. Insert into a unit to use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.99 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Steel Take-Up Unit UCTH

NIPPON PILLOW BLOCK

This take-up unit features a frame made from steel, and is a unit product combined with an adjustment bolt.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	138.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type

ASAHI SEIKO

Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

Select to compare

Configure now
Starting from^∗ ：	138.86 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Take-up housing units PHUSE, cast iron and sheet steel housing, radial insert ball bearing with eccentric locking collar, P seals

INA

[Specifications]
・Shaft Bore Dia. d(mm): 25-50
・Width(mm): 31-130
・Type: PHUSE

Take-up housing units PHUSE.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	65.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape

ASAHI SEIKO

[Features]
· Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.39 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing UC

NIPPON PILLOW BLOCK

Grease-sealed deep-groove ball bearing with an outer ring that has a spherical outer diameter surface fitted with an oil supply mechanism, as well as a wide inner ring that has cylindrical holes with set screws included.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Take-Up Unit With Steel Plate Frame SBNPTH

NIPPON PILLOW BLOCK

The SBNPTH is a lightweight type unit that combines a steel plate take-up unit, a steel plate frame, and an adjustment bolt.
The bearing box can be moved in a radial direction using the adjustment bolt to adjust the support position for the shaft.
A compact and lightweight unit with a bearing box and frame made of pressed steel plate.
The frame is mounted to the machine body with 4 bolts.

Select to compare

Configure now
Starting from^∗ ：	88.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron Take-Up

NTN

The bearing box is fitted with a slide groove and structured to move freely.
For this reason, it is suitable for use in places that require adjustment of the bearing to shaft distance.

[Features]
· Accuracy rating: JIS B 1704: 1978 level 3.
· Items not available in the standard product lineup can be ordered with a short delivery time.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.91 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing ER

NIPPON PILLOW BLOCK

Grease-sealed deep-groove ball bearing with an outer ring that has a cylindrical outer diameter surface fitted with an oil supply mechanism and a stopper ring, as well as a wide inner ring that has cylindrical holes with set screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert Bearing RB

NIPPON PILLOW BLOCK

ER-type bearing with the oil supply mechanism and stopping ring removed.
Grease-sealed deep-groove ball bearing with an outer ring that has a cylindrical outer diameter surface and an inner ring that has cylindrical holes with set screws included.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.01 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Take-Ups

MISUMI

[Features] It can be used for belt and chain adjustments, etc. in areas where free movement of the shaft centre is required.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing For Lightweight Bearing Units

KMT BEARINGS

[U-shaped] Bearing: JIS-SUJ (rolling bearing steel)2 (equivalent), Lubrication: Lithium grease [SU type] Bearing: EN 1.4125 Equiv. (equivalent), Lubrication: H1 certified food grade grease

Select to compare

Configure now
Starting from^∗ ：	9.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron Hanger Shape

NTN

The shaft and vertical direction cross-sectional area are extremely small, and the product is designed to be suitable as an intermediary bearing for use with screw conveyors. As a result, it can be used hanging down with pipe or other material mounted in the single-position screw hole.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Take-up housing units RHE, cast iron housing, radial insert ball bearing with eccentric locking collar, R seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.58 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flanged Housing Unit, UCF Series

FAG

[Specifications]
・Bore diameter [d](mm): 7.312-90
・Flange width [L](mm): 86-235
・Total height unit [U](mm): 33.3-96.3

Flanged housing unit UCF
Square version With grub screws in inner ring

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Floating bearing units block version (24078)

NORELEM

· With deep groove ball bearing

· Dimensions matched to floating bearing unit 24076

Select to compare

Configure now
Starting from^∗ ：	42.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type

ASAHI SEIKO

Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.

Select to compare

Configure now
Starting from^∗ ：	23.79 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC

ASAHI SEIKO

[Features]
· Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

Select to compare

Configure now
Starting from^∗ ：	57.11 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Take-up Housing Units MSTU, Sheet Steel Housing, Radial Inseart Ball Bearing with Eccentric Locking Collar, P Seals, with Relubrication Facility

INA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.12 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flanged Bearing Unit, Setscrew Locking, FLCTEY Series

INA

Flanged housing unit FLCTEY..-N

Select to compare

Configure now
Starting from^∗ ：	42.32 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Insert bearing B (24235)

NORELEM

· Inside rings for easier fastening

· Internal diameter with plus-tolerance

· Lubricated for entire service life

Select to compare

Configure now
Starting from^∗ ：	12.93 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Blocks, Stainless Steel Pillow Block Type (Solid Grease / Food Machinery Grease)

MISUMI

・ It retains excellent antiseptic properties and corrosion resistance, and can be used according to grease.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	118.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Insert Bearing UK

NIPPON PILLOW BLOCK

Grease-sealed deep groove ball bearing with an outer ring which has a spherical outer diameter surface with an oil supply mechanism installed, as well as a taper hole ring.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH

ASAHI SEIKO

[Features]
· The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.

Select to compare

Configure now
Starting from^∗ ：	32.63 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type

ASAHI SEIKO

Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

Select to compare

Configure now
Starting from^∗ ：	10.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Double-Ended Bearing, Gland Seal Method, FU-Type

SANWA CONVEYOR

Because it is only welded to the end plate (casing), assembly time is short. Stainless steel products are also available.

[Features]
· A bearing unit used on the drive side and driven side. Only needs to be welded onto the end plate (casing), reducing the required assembly time.
· A gland seal is used for the seal part (oil seal products are also available).

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	435.71 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

Take-up housing units PHE, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.45 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Take-up housing units PTUE, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.45 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Take-up housing units RTUE, cast iron housing, radial insert ball bearing with eccentric locking collar, R seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flanged Housing Unit, UKFC Series

FAG

[Specifications]
・Bore diameter [d](mm): 20-80
・Height Flange [H](mm): 115-265
・Total height unit [U](mm): 30.7-65.7

Flanged housing unit UKFC
Round version With adapter sleeve

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Bearing Unit, Casting Asymmetric Flange Type

MISUMI

·Features: Only one side has a two-bolt flange, suitable for space saving.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Tensioners

MISUMI

・ It is suitable for places where the axis needs to be moved, such as adjusting the belt or chain.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	81.99 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron Take-Up Unit UCT

NIPPON PILLOW BLOCK

· UCT is a unit that combines a bearing box fitted with a slide groove.
· The bearing box can be moved along the slide groove in a radial direction to adjust the support position at the shaft center.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	20.27 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cast Iron Take-Up Unit, Adapter Type, UKT (Adapter Sold Separately)

NIPPON PILLOW BLOCK

[Features]
· A combination bearing unit that contains a bearing and a bearing box fitted with a slide groove.
· The bearing box can be moved along the slide groove in a radial direction to adjust the support position.
· With cylindrical holes as a general usage condition, this high precision unit can be used for a variety of applications. *Adapter sold separately.
· Please confirm the compatible adapters in our catalog.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.09 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Grooved Steel Take-Up Unit UCTL

NIPPON PILLOW BLOCK

This take-up unit features a frame made from grooved steel, and is a unit product combined with an adjustment bolt.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	51.49 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape

ASAHI SEIKO

The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Select to compare

Configure now
Starting from^∗ ：	66.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series

ASAHI SEIKO

[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

Select to compare

Configure now
Starting from^∗ ：	62.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Take-up housing units PSFT, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	41.07 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Take-up housing units RTUEO, cast iron housing, radial insert ball bearing with eccentric locking collar, heavy series, R seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	527.85 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

SKF Y-Take-Up Unit, Gray Cast Iron with Through-Hole Fastening

SKF

Select to compare

Configure now
Starting from^∗ ：	22.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKF Y-Take-Up Units, Gray Cast Iron with Eccentric Locking Collar Fixing

SKF

Select to compare

Configure now
Starting from^∗ ：	53.18 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Unit, Type
Bearing Unit, Type
Shaft Bore Dia. d(mm)
Unit Body Material
Bearing Inner Dia. Shape
Pillow Type, Category
Rolling Element Material
Surface Treatment
Specifications/Environment
Refueling Method

	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NTN	NIPPON PILLOW BLOCK	MISUMI	NTN	NTN	NIPPON PILLOW BLOCK	ASAHI SEIKO	INA	ASAHI SEIKO	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NTN	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	MISUMI	KMT BEARINGS	NTN	INA	FAG	NORELEM	ASAHI SEIKO	ASAHI SEIKO	INA	INA	NORELEM	MISUMI	NIPPON PILLOW BLOCK	ASAHI SEIKO	ASAHI SEIKO	SANWA CONVEYOR	INA	INA	INA	FAG	MISUMI	MISUMI	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	ASAHI SEIKO	ASAHI SEIKO	INA	INA	SKF	SKF
Product Series	Stretcher Unit	Insert Bearing SB	Pilot	Bearing Unit Single Unit Cover	Ball Bearing for Units	Steel Take-Up Unit UCTH	Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type	Take-up housing units PHUSE, cast iron and sheet steel housing, radial insert ball bearing with eccentric locking collar, P seals	Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape	Insert Bearing UC	Take-Up Unit With Steel Plate Frame SBNPTH	Cast Iron Take-Up	Insert Bearing ER	Insert Bearing RB	Take-Ups	Insert Bearing For Lightweight Bearing Units	Cast Iron Hanger Shape	Take-up housing units RHE, cast iron housing, radial insert ball bearing with eccentric locking collar, R seals	Flanged Housing Unit, UCF Series	Floating bearing units block version (24078)	Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type	Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC	Take-up Housing Units MSTU, Sheet Steel Housing, Radial Inseart Ball Bearing with Eccentric Locking Collar, P Seals, with Relubrication Facility	Flanged Bearing Unit, Setscrew Locking, FLCTEY Series	Insert bearing B (24235)	Pillow Blocks, Stainless Steel Pillow Block Type (Solid Grease / Food Machinery Grease)	Insert Bearing UK	Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH	Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type	Double-Ended Bearing, Gland Seal Method, FU-Type	Take-up housing units PHE, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals	Take-up housing units PTUE, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals	Take-up housing units RTUE, cast iron housing, radial insert ball bearing with eccentric locking collar, R seals	Flanged Housing Unit, UKFC Series	Ball Bearing Unit, Casting Asymmetric Flange Type	Pillow Blocks, Tensioners	Cast Iron Take-Up Unit UCT	Cast Iron Take-Up Unit, Adapter Type, UKT (Adapter Sold Separately)	Grooved Steel Take-Up Unit UCTL	Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape	Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series	Take-up housing units PSFT, cast iron housing, radial insert ball bearing with eccentric locking collar, P seals	Take-up housing units RTUEO, cast iron housing, radial insert ball bearing with eccentric locking collar, heavy series, R seals	SKF Y-Take-Up Unit, Gray Cast Iron with Through-Hole Fastening	SKF Y-Take-Up Units, Gray Cast Iron with Eccentric Locking Collar Fixing
CAD	2D / 3D		2D / 3D			2D / 3D		3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	3D								2D / 3D				2D	3D	3D	3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D			3D	3D
Starting from^∗	55.39 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.40 € *Unit price with basic configuration	17.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.04 € *Unit price with basic configuration Volume Discount	5.99 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	138.24 € *Unit price with basic configuration	138.86 € *Unit price with basic configuration	65.00 € *Unit price with basic configuration Volume Discount	11.39 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.32 € *Unit price with basic configuration Volume Discount	88.64 € *Unit price with basic configuration	17.91 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.38 € *Unit price with basic configuration	13.01 € *Unit price with basic configuration	17.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.99 € *Unit price with basic configuration	32.77 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	34.58 € *Unit price with basic configuration Volume Discount	14.09 € *Unit price with basic configuration Volume Discount	42.66 € *Unit price with basic configuration	23.79 € Special price *Unit price with basic configuration Promotional pricing	57.11 € *Unit price with basic configuration	29.12 € *Unit price with basic configuration Volume Discount	42.32 € *Unit price with basic configuration	12.93 € *Unit price with basic configuration	118.42 € *Unit price with basic configuration Volume Discount	13.69 € *Unit price with basic configuration Volume Discount	32.63 € Special price *Unit price with basic configuration Promotional pricing	10.46 € *Unit price with basic configuration	435.71 € *Unit price with basic configuration Volume Discount	34.45 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	34.45 € *Unit price with basic configuration Volume Discount	46.88 € *Unit price with basic configuration Volume Discount	30.88 € *Unit price with basic configuration Volume Discount	25.27 € *Unit price with basic configuration Volume Discount	81.99 € *Unit price with basic configuration Volume Discount	20.27 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.09 € *Unit price with basic configuration	51.49 € *Unit price with basic configuration	66.95 € *Unit price with basic configuration	62.90 € *Unit price with basic configuration	41.07 € *Unit price with basic configuration Volume Discount	527.85 € *Unit price with basic configuration Volume Discount	22.98 € *Unit price with basic configuration	53.18 € *Unit price with basic configuration
Min. Shipping Days	Same day	6 Days	Same day	5 Days	Same day	6 Days	10 Days	3 Days	Same day	6 Days	6 Days	Same day	6 Days	Same day	Same day	6 Days	Same day	3 Days	4 Days	4 Days	Same day	5 Days	3 Days	4 Days	4 Days	5 Days	6 Days	Same day	5 Days	9 Days	Same day	3 Days	3 Days	4 Days	5 Days	5 Days	Same day	10 Days	12 Days	5 Days	5 Days	3 Days	3 Days	5 Days	5 Days
Specifications			Order quantities extended (D-JIT)												Order quantities extended (D-JIT)
Unit, Type	Bearing Unit / Framed Bearing Unit	Bearing Unit	Bearing Unit	Others	Others	Framed Bearing Unit	Bearing Unit	-	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Others	Bearing Unit	-	-	-	Bearing Unit	Bearing Unit	-	-	-	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Others	-	-	-	-	Bearing Unit	Framed Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit / Framed Bearing Unit	Bearing Unit	Bearing Unit	-	-	-	-
Bearing Unit, Type	Take-Up Type	Others	Round Flange Type	-	-	Take-Up Type	Take-Up Type	-	Others	Others	Take-Up Type	Take-Up Type	Others	Others	-	-	Others	-	-	Pillow Type	Take-Up Type	Others	-	-	Insert Bearingg	Pillow Type	Others	Others	Others	-	-	-	-	-	Deformed Diamond-Shaped Flange Type	Take-Up Type	Take-Up Type	Take-Up Type	Take-Up Type	Pillow Type	Diamond-Shaped Flange Type	-	-	Take-Up Type	Take-Up Type
Shaft Bore Dia. d(mm)	12 ～ 70	12 ～ 40	12 ～ 50	-	10 ～ 140	30	20 ～ 65	25 ～ 50	15 ～ 70	1-1/4 ～ 85	20	15 ～ 90	25	30	12 ～ 50	-	17 ～ 50	20 ～ 50	-	-	12 ～ 140	20	25 ～ 30	-	12 ～ 35	20 ～ 50	20 ～ 125	12 ～ 50	20	40 ～ 95	20 ～ 50	20 ～ 60	20 ～ 120	-	12 ～ 50	12 ～ 50	20 ～ 140	20 ～ 125	20 ～ 45	12 ～ 25	10 ～ 25	20 ～ 35	80 ～ 90	25 ～ 50	30 ～ 35
Unit Body Material	Cast Iron / Steel	-	Cast Iron	-	-	Structural Steel	Cast Iron	-	Cast Iron	-	Cast Iron	Cast Iron	-	-	Cast Iron	-	Cast Iron	-	-	Steel	Cast Iron	Stainless Steel	-	-	Steel	Stainless Steel	-	Cast Iron	Cast Iron	Stainless Steel / Structural Steel	-	-	-	-	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Structural Steel	-	-	-	-	Cast Iron	Cast Iron
Bearing Inner Dia. Shape	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	-	Cylindrical Hole / Cylindrical Hole, Set Screw / Cylindrical Hole, Eccentric Collar / Taper Hole, Adapter	Cylindrical Hole, Set Screw	Taper Hole, Adapter	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw / Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	-	-	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	-	-	-	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Others	-	-	-	-	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Eccentric Collar	-	-	-	-
Pillow Type, Category	-	-	-	-	-	-	Standard	-	Standard	-	-	-	-	-	-	-	-	-	-	-	Standard	Standard	-	-	-	Standard	-	Standard	Standard	-	-	-	-	-	Others	-	-	-	-	Standard	Standard	-	-	-	-
Rolling Element Material	Steel	Steel	Steel	-	Steel / Stainless Steel	Steel	Stainless Steel	-	Stainless Steel	Steel / Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	-	-	-	Stainless Steel	Stainless Steel	-	-	-	Stainless Steel	Steel	Stainless Steel	Stainless Steel	Steel	-	-	-	-	Steel	Steel	Steel	Steel	Steel	-	-	-	-	-	-
Surface Treatment	Not Provided	Not Provided	Not Provided	-	-	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	-	-	-
Specifications/Environment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	-	Standard	Standard	-	-	-	-	-	-	-	-	-
Refueling Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Lubrication-Free Type	-	-	-	-	-	-	-	-	Refueling Type / Lubrication-Free Type	Refueling Type / Lubrication-Free Type	-	-	-	-	-	-	-	-	-