Spur Gears（Material (Details)：General Steel Material Page 2）

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Spur gear / steel / module 3.0

  KYOUIKU GEAR MFG（KG）

  Space-saving, lighter weight spur gear with module 3.0 and a pressure angle of 20° (full depth tooth) and, made of S45C material
  [Features]
  ·KG standard comes in parallel width (for light loads) and wide width (for heavy loads), selectable according to your application.
  · Gear precision grade is JIS B 1702-1 (ISO) Grade 8 (Gear induction hardened part: Grade 9).
  · Shape A: without hub, B: with single hub, BF: additional expansion product with single hub.
  · For shaft fastening, "-" is without keyway or screw, "=" is with keyway and "#" is with keyway, screw hole, key material and screw.
  · Space-saving, lighter, no need for fastening (=, #).
  · Products with "H" added to the suffix are gear induction hardened. Holes are not modified after hardening for HRC 47 to 53.
  [Applications]
  · Equipment power transmission, drive and transport parts.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spur gears / backlash control / module 2.0

  KYOUIKU GEAR MFG（KG）

  Ground tooth type backlash adjustment gear with induction hardened teeth. As finished to high precision, backlash can be adjusted to be smaller. Mating gear is a KG gear spur gear.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	269.19 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spur gears / backlashless / module 0.8

  KYOUIKU GEAR MFG（KG）

  Tooth surface interval play = "backlash" closer to 0 - no backlash. With 2 piece gear the opposite gear is meshed, and backlash is kept to a minimum. High precision, ground tooth surface products are available.
  Suitable for places where precise rotation is required. Already tapped, so can be installed immediately. Made from A5056, S45C, SCM435, 440.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	158.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spur gears / backlashless / module 1.0

  KYOUIKU GEAR MFG（KG）

  Tooth surface interval play = "backlash" closer to 0 - no backlash. With 2 piece gear the opposite gear is meshed, and backlash is kept to a minimum. High precision, ground tooth surface products are available.
  Suitable for places where precise rotation is required. Already tapped, so can be installed immediately. Made from S45C, SCM435, 440.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	167.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 0.5

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out. A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	73.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 0.8

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out. A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears with shafts

  KOHARA GEAR INDUSTRY

  S45C made spur gear with thermally shaft to improve strength. Difficult to machine small teeth number gears produced as shaft attached gear, with shaft part machined to high precision.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.84 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spur gear units / module 3

  SANKOSEISAKUSHO

  Modules are available with the most common numbers of teeth from 12T to 80T. Standard products are also used for combining speed ratios. The manufacturer can also offer additional machining such as shaft hole and keyway machining.

  Select to compare

  Configure now
  Starting from∗ ：	15.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / K Standard / module 1 / full tooth / 20° contact angle

  KATAYAMA CHAIN

  K standard pinion gear with wide selection of modules, and number of teeth available. Material: S45C with black dye treatment. N 8 precision pinion gear.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / K Standard / module 2.5 / full tooth / 20° contact angle

  KATAYAMA CHAIN

  K standard pinion gear with wide selection of modules, and number of teeth available. Material: S45C with black dye treatment. N 8 precision pinion gear.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 1.5

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out.
  · A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 2.5

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out. A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bevel spur gears / CP

  KOHARA GEAR INDUSTRY

  Thermally refined SCM440 made, CP tapered spur gear. Backlash can be adjusted in combination with CP taper rack.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spur gears with ground teeth and shaft / CP

  KOHARA GEAR INDUSTRY

  Thermally refined S45C material with induction hardened tooth surface, and ground at both centers, precision JISN7 grade CP spur gear with shaft. CP spur gear with shaft and small number of teeth is ground, and the shaft part can be machined as an integrated high-precision assembly.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.86 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gearboxes / ground / module 0.5 / SBU

  KYOUIKU GEAR MFG（KG）

  JIS N7 economy type precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Material S45C.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / K Standard / module 1.5 / full tooth / 20° contact angle

  KATAYAMA CHAIN

  K standard pinion gear with wide selection of modules, and number of teeth available. Material: S45C with black dye treatment. N 8 precision pinion gear.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 1.0

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out.
  · A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / SG / module 3.0

  KYOUIKU GEAR MFG（KG）

  JIS N5 high-precision grade ground spur gear. Excellent wear resistance and high-strength of teeth, due to induction hardening. Made from SCM435, 440.
  [Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out.
  · A reference surface when carrying out additional work milling hole, tooth part outer circumference, or both side surfaces.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears for steel rack pitch 2

  KYOUIKU GEAR MFG（KG）

  CP2.0 CP rack use pinion gear. Amount of movement per rotation is a millimeter integer. Choose from 15 to 30 teeth.
  Directly mountable, 2-point tapped product also available. Material S45C.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spur gears for DR

  KOHARA GEAR INDUSTRY

  Dedicated pinion gear for molded flexible rack, with thin tooth face and tapped, so can be assembled without hole machining.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spur gears / ground / module 2.5 / SGE

  KYOUIKU GEAR MFG（KG）

  JIS N7 Grade economy type precision grade ground spur gear.
  [Features]
  · Excellent wear resistance and high strength of teeth, due to induction hardening.
  · Material: S45C.
  [Applications]
  · Positioning stage adjustment, reduction gear, etc.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	52.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spur gear units / module 1.5

  SANKOSEISAKUSHO

  Modules are available with the most common numbers of teeth, from 12T to 80T. Standard products are also used for combinations of speed ratios. The manufacturer can also offer additional machining such as machining of shaft holes and keys.

  Select to compare

  Configure now
  Starting from∗ ：	7.19 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spur gear units / module 2

  SANKOSEISAKUSHO

  Modules with commonly used numbers of teeth are available, from 12T up to 80T.

  Select to compare

  Configure now
  Starting from∗ ：	9.24 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spur gear units / module 2.5

  SANKOSEISAKUSHO

  Modules are available with the most common numbers of teeth from 12T to 80T. Standard products are also used for the combination of speed ratios. The manufacturer can also offer additional machining such as shaft hole and keyway machining.

  Select to compare

  Configure now
  Starting from∗ ：	13.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...