Keyless Bushing (Fastening Fittings) (Body Material: Grey Iron)

• 

  • Rekommenderad

  CONCAR

  Tapered Clamping Bush 1008 with Inch Drill

  [Specifications]・Type: 1008・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  9.45 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Rekommenderad

  CONCAR

  Tapered Clamping Bush 1008 with Metric Drill

  [Specifications]・Type: 1008・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  4.72 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1610 with Metric Drill

  [Specifications]・Type: 1610・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  8.26 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 2517 with Metric Drill

  [Specifications]・Type: 2517・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  13.45 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1108 with Inch Drill

  [Specifications]・Type: 1108・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  10.91 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1615 with Metric Drill

  [Specifications]・Type: 1615・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  9.08 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3020 with Inch Drill

  [Specifications]・Type: 3020・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  34.54 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 4545 with Metric Drill

  [Specifications]・Type: 4545・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  78.15 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3020 with Metric Drill

  [Specifications]・Type: 3020・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  18.54 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1108 with Metric Drill

  [Specifications]・Type: 1108・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  5.45 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1210 with Inch Drill

  [Specifications]・Type: 1210・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  14.54 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1210 with Metric Drill

  [Specifications]・Type: 1210・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  7.26 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1215 with Metric Drill

  [Specifications]・Standard: DIN 6885 Part 1Tapered Clamping Bush 1215 with Metric Drill

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  9.08 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1310 with Metric Drill

  [Specifications]・Type: 1310・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  9.08 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1610 with Inch Drill

  [Specifications]・Type: 1610・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  17.45 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 1615 with Inch Drill

  [Specifications]・Type: 1615・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  18.17 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 2012 with Inch Drill

  [Specifications]・Type: 2012・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  21.45 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 2012 with Metric Drill

  [Specifications]・Type: 2012・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  10.54 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 2517 with Inch Drill

  [Specifications]・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Tapered Clamping Bush 2517 with Inch Drill

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  18.00 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3030 with Inch Drill

  [Specifications]・Type: 3030・Body Material: Cast Iron・Bore diameter(mm): 76.2・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  92.34 €

  Ordinarie avsändningsdatum:

  17 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3030 with Metric Drill

  [Specifications]・Type: 3030・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  25.80 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3525 with Metric Drill

  [Specifications]・Type: 3525・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  46.17 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3535 with Inch Drill

  [Specifications]・Type: 3535・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  87.25 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 3535 with Metric Drill

  [Specifications]・Type: 3535・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  43.62 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 4040 with Metric Drill

  [Specifications]・Type: 4040・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  61.43 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  CONCAR

  Tapered Clamping Bush 5050 with Metric Drill

  [Specifications]・Type: 5050・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  125.06 €

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera