Keyless Bushing (Fastening Fittings) (Allowable Torque Range: 70.1 to 100.0)

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Order quantities extended (D-JIT)
  • Stock

  MISUMI

  Keyless Bushings / Standard

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	15 ～ 19	70.1 to 100.0	Not Provided / Black Oxide / Electroless Nickel Plating	29 ～ 33	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  43.20 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Keyless Bushings / Compact

  [Features] It has a centring function and is suitable for a smaller hub.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Thin Wall	Provided	Stainless Steel	19 ～ 25	70.1 to 100.0	Not Provided	27 ～ 34	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  113.22 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ISEL

  Mecha Lock MA, Standard Type

  [Features]· 34 models that have shaft diameters standardized from ø5 to ø85.· Centering function suppresses outer circumference and terminal surface run-out.· Loose design of slope angle degrees produces a self-locking effect.· Hub internal diameter can be used with pass-through machining.· Wide range of hub options with thin walls and low surface pressure

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	16	70.1 to 100.0	Not Provided	30	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  55.42 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Order quantities extended (D-JIT)
  • Stock

  MISUMI

  Keyless Bushings / Easy Mounting (Nut)

  [Features] It can be easily installed by simply tightening 1 nut.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Nut Tightening	Not Provided	Steel	14 ～ 15	70.1 to 100.0	Not Provided / Black Oxide / Electroless Nickel Plating	23 ～ 24	Tapered Sleeve Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  45.85 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Keyless Bushings / Thin

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Direct Mounting	Not Provided	Steel	20	70.1 to 100.0	Not Provided	25	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  36.02 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-A Series

  [Features]· Self-centering function: Prevents minute Off-centering.· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.· Internal diameters 4.5ø to 40ø standardized.· Has simple structure for easy assembly.· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  Mer information

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	16	70.1 to 100.0	Not Provided	30	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  21.54 €

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ISEL

  Mecha-Lock MN Series, Nut Type

  Easy-to-tighten nut type key-less bushing (fastening fitting).[Features]· Tightening the nut shortens the tightening time.· Easiest assembly among mechanical lock series.· Centering can be done by simply tightening both the sides.· Also contributes to reduction of hub outer diameter.[Applications]· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.· Ideal for installations with thinner hub thickness and low torque.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Nut Tightening	Provided	Steel	14	70.1 to 100.0	Not Provided	23	Tapered Sleeve Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  46.53 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Skicka samma dag går att få

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  MIKI PULLEY

  POSI LOCK D

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.[Features]· Tighten the clamping bolt to move the outer ring in the shaft direction.· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.· Short in shaft direction, does not take up more space than necessary.· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Straight	-	Steel	18 ～ 19	70.1 to 100.0	Not Provided / Electroless Nickel Plating	35	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  87.94 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  16 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ISEL

  Mega Lock, MC, Standard Type (Aluminum Specifications)

  · 22 models from φ4 to φ35 shaft diameter available as standard· Supports aluminum timing pulleys (steel is also usable)· Reduced number of bolts shortens attachment/detachment time· With a spigot joint on the back, it can also be used as a bearing retainer· With low surface pressure, it is also ideal for hollow shafts

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Aluminum	24	70.1 to 100.0	Clear Anodize	41	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  51.43 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SUNGIL

  Keyless Bushing A.P.LOCK SAPA Series

  [Features]· Made from aluminum.Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.· High torque transmission powerUses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.· Optimal for clean roomsElectroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Mer information

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Not Provided	Aluminum	17 ～ 19	70.1 to 100.0	Clear Anodize	31 ～ 33	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  24.96 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  SUNGIL

  Keyless Bushing A.P.LOCK SAPC Series

  [Features]· Made from aluminum.Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.· Optimal for aluminum pulleys.When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.· Staged machining structure.Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.· Easy assembly and position setting.For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  Mer information

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Not Provided	Aluminum	20	70.1 to 100.0	Clear Anodize	37	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  32.00 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  ISEL

  Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications

  Nut tightening shortens tightening time. Electroless nickel plated product.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Nut Tightening	Provided	Steel	14	70.1 to 100.0	Electroless Nickel Plating	23	Tapered Sleeve Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  100.56 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  KATAYAMA CHAIN

  KanaLock (Cost-Effective Product) Model KPL300

  [Features]· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.· This facilitates great torque transmission.· Boss hole and shaft hole fitting is up to H8/h8

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Sleeve	Not Provided	Steel	28 ～ 30	70.1 to 100.0	Not Provided	-	Tapered Sleeve Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  6.30 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ISEL

  Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications

  Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	17 ～ 19	70.1 to 100.0	Electroless Nickel Plating	31 ～ 33	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  69.06 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-AK Series

  [Features]· Self-centering function: Prevents minute Off-centering.· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.· Internal diameters 4.5ø to 40ø standardized.· Has simple structure for easy assembly.· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  Mer information

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	17 ～ 19	70.1 to 100.0	Electroless Nickel Plating	31 ～ 33	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  27.81 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-B Series

  [Features]· Self-centering function: Prevents minute Off-centering.· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  Mer information

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	15 ～ 16	70.1 to 100.0	Not Provided	32 ～ 33	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  28.06 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  [Clean & Pack]MechaLock - Compact

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products · Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ · Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-Rust Packing Oil removal General Environment Regular assembly process Post battery assembly process SH-□□ Precision Cleaning Degassing Double Packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing Double Packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Is provided with the Centering function and is suitable for combination use with small-sized hubs.

  Mer information

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Thin Wall	Provided	Stainless Steel	19 ～ 25	70.1 to 100.0	Not Provided	27 ～ 34	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  101.69 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-CS Series

  [Features]· Self-centering function: Prevents minute Off-centering.· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)· Suitable for short hubs.· Internal ring mounts to the terminal face, preventing the hub from moving when connected.· Choose from stainless steel or electroless nickel plated products to suit the use environment.

  Mer information

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Thin Wall	Provided	Stainless Steel	19 ～ 25	70.1 to 100.0	Not Provided	27 ～ 34	Single Cone Type	Mechanical Type (Wedge Type)

  Ordinarie pris (exklusive MOMS):

  92.31 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera