Castors, Accessories (Caster Type: Plate Type Swivel 6 sida)

• 

  Equipment Castors(1100)

• 

  Accessories for Castors(9)

• 

  BLICKLE

  Stainless Steel Swivel Castor, LIXR-POH Series

  Stainless Steel Swivel Castor, with Bolt Hole Fitting, Heat-Resistant, Nylon WheelBracket: LIXR serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingdouble ball bearing in the swivel headstrong central kingpinsmooth rolling characteristic and low wear, increased service lifeswivel head play is set specifically for high-temperature applicationshighly heat-resistant greaseall parts including axle material are corrosion-resistantWheel: POH serieshighly heat-resistant nylon, impact resistant, hardness 85 Shore D, colour naturalOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +170 °Coven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °CLoad capacity may be reduced in temperatures over +70 °Csuitable for autoclaves

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	102 ～ 150	140.01 to 220.00	-	Engineering Plastics	Heat Resistance	-	-

  Ordinarie pris (exklusive MOMS):

  75.49 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Blickle Synthetic Twin Castor Move, LKD-PATH Series

  Blickle Synthetic Twin Castor Move, Colour Grey White, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreBracket: LKD serieshigh-quality nylon 6, impact resistanttwo grooved ball bearings in the swivel head sealed on both sidesbolt holecolour grey white RAL 9002modern, appealing designWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002Other features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	103 ～ 130	80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  45.73 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Swivel Castor, LKPA-POA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Nylon Wheel, LKPA-POA SeriesBracket: LKPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POA serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	130 ～ 155	80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  19.40 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, LK-POEV Series

  Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel CentreBracket: LK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 125x50 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: high-quality nylon 6, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	110 ～ 262	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	Antistatic / Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  51.50 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, LK-POW Series

  Pressed Steel Swivel Castor, Heavy Duty Design, Nylon Wheel, with Rubber Damping Ring, Low Noise, with Synthetic Thread GuardBracket: LK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 125x50 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POW serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour whitelow-noise operation (-10 decibels) with elastic cushion layer made from elastic solid rubber, colour redOther features:with synthetic thread guard, largehigh chemical resistance to many aggressive substancesoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	111 ～ 161	140.01 to 220.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  51.41 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, LKPXA-TPA Series

  Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LKPXA-TPA SeriesBracket: LKPXA serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	70 ～ 161	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  67.89 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, LKPXA-VPA Series

  Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKPXA-VPA SeriesBracket: LKPXA serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VPA seriestyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-stainingrim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	110 ～ 155	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Antistatic	-	-

  Ordinarie pris (exklusive MOMS):

  69.24 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, LKR-ALBS Series

  Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel CentreBracket: LKR seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: ALBS seriestread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	130 ～ 155	220.01 to 320.00 / 320.01 to 485.00	-	Aluminum	Antistatic	-	-

  Ordinarie pris (exklusive MOMS):

  113.46 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Swivel Castor, LKRA-VPA Series

  Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKRA-VPA SeriesBracket: LKRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VPA seriestyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-stainingrim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	70 ～ 185	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  23.27 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Swivel Castor, LKRA-VSTH Series

  Light Duty Swivel Castor, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre, LKRA-VSTH SeriesBracket: LKRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VSTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: steelOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	70 ～ 130	140.01 to 220.00	-	Steel	-	-	-

  Ordinarie pris (exklusive MOMS):

  43.50 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, LKR-GSPO Series

  Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel Made of Compressed Cast NylonBracket: LKR seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: GSPO serieshigh-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beigeOther features:high chemical resistance to many aggressive substancesreduced moisture absorptionoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °Cconsider the surface pressure on sensitive floors due to high point loadsTest in compliance with DIN 12530 with extended breaks to avoid thermal overloading

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	130	320.01 to 485.00	-	Engineering Plastics	-	-	-

  Ordinarie pris (exklusive MOMS):

  133.08 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, LKRXA-PO Series

  Stainless Steel Light Duty Swivel Castor, with Bolt Hole, Nylon Wheel, LKRXA-PO SeriesBracket: LKRXA serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PO serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural whiteOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	108 ～ 161	80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  60.83 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Heavy Duty Swivel Castor, LKX-POBS Series

  Stainless Steel Heavy Duty Swivel Castor, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Nylon Wheel Centre, with Synthetic Thread GuardBracket: LKX serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 125x50 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POBS seriestread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining, very low rolling resistance, high dynamic load capacity, corrosion and hydrolysis-resistantwheel centre: high-quality nylon 6, impact resistant, colour blackOther features:with synthetic thread guard, smallcorrosion and hydrolysis-resistanthigh chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	155 ～ 202	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Ordinarie pris (exklusive MOMS):

  216.42 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Twin Wheel Swivel Castor, LMDA-PATH Series

  Light Duty Twin Wheel Swivel Castor, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreBracket: LMDA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headpressed swivel headWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	71 ～ 98	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  14.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Twin Wheel Swivel Castor, LMDA-TPA Series

  Light Duty Twin Wheel Swivel Castor, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel CentreBracket: LMDA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headpressed swivel headWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	71 ～ 170	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  12.42 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LOD-SPO Series

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Nylon Heavy Duty WheelBracket: LOD seriessolid welded steel construction, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headfour specially-shaped, hardened bearing seats for additional strengthbolted and secured welded central kingpin, extremely strongswivel head seal with labyrinth designgrease nippleWheel: SPO serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural whiteOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	200 ～ 245	Up to 35.00 / 485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	-	-	-

  Ordinarie pris (exklusive MOMS):

  267.03 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LOD-VSTH Series

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel CentreBracket: LOD seriessolid welded steel construction, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headfour specially-shaped, hardened bearing seats for additional strengthbolted and secured welded central kingpin, extremely strongswivel head seal with labyrinth designgrease nippleWheel: VSTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: steelOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	245	485.01 to 750.00	-	Steel	-	-	-

  Ordinarie pris (exklusive MOMS):

  354.73 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LO-GTH Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: LO seriessolid welded steel construction, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headfour specially-shaped, hardened bearing seats for additional strengthbolted and secured welded central kingpin, extremely strongswivel head seal with labyrinth designgrease nippleWheel: GTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: rugged grey cast iron, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	170 ～ 295	Up to 35.00 / 485.01 to 750.00 / 750.01 or More	-	Others	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  259.88 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Swivel Castor, LPA-PATH Series

  Light Duty Swivel Castor, with Top Plate Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre, LPA-PATH SeriesBracket: LPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	100 ～ 125	35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  9.40 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Light Duty Swivel Castor, LPA-TPA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LPA-TPA SeriesBracket: LPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	71 ～ 123	Up to 35.00 / 35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  8.62 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-POTH Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel CentreBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POTH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour natural whiteOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	125 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Ordinarie pris (exklusive MOMS):

  39.47 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, LRXA-PO Series

  Stainless Steel Light Duty Swivel Castor, with Bolt Hole, Nylon Wheel, LRXA-PO SeriesBracket: LRXA serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PO serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural whiteOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	69 ～ 101	35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  46.10 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, LRXA-TPA Series

  Stainless Steel Light Duty Swivel Castor, with Bolt Hole, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LRXA-TPA SeriesBracket: LRXA serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingall parts including axle material are corrosion-resistantdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	69 ～ 101	Up to 35.00 / 35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  45.90 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSD-GB Series

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: LSD seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: GB seriestread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	145 ～ 530	Up to 35.00 / 750.01 or More	-	Others	-	-	-

  Ordinarie pris (exklusive MOMS):

  453.27 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSD-GST Series

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: LSD seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: GST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	185 ～ 630	Up to 35.00 / 750.01 or More	-	Others	-	-	-

  Ordinarie pris (exklusive MOMS):

  649.62 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LSFN-GB Series

  Heavy Duty Welded Steel Swivel Castor, with Steel Spring, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: LSFN seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freerobust spring structure with steel springmaintenance-free spring mechanismaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: GB seriestread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	245 ～ 395	Up to 35.00 / 750.01 or More	-	Others	-	-	-

  Ordinarie pris (exklusive MOMS):

  510.02 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LS-PS Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Pneumatic TyreBracket: LS seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: PS seriestyre: pneumatic tyre with zig-zag profile, hardness 60 Shore A, colour black, 6-ply ratingrim: heavy pressed steel, with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +50 °Cthe wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.speeds up to 25 km/h with reduced load capacity

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	170 ～ 205	Up to 35.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Steel	-	-	-

  Ordinarie pris (exklusive MOMS):

  584.44 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LS-SPO Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Nylon Heavy Duty WheelBracket: LS seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: SPO serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural whiteOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	145 ～ 380	Up to 35.00 / 485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	-	-	-

  Ordinarie pris (exklusive MOMS):

  241.93 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LS-VLE Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Elastic Solid Rubber TyreBracket: LS seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: VLE seriestyre: super-elastic solid rubber, hardness 70 Shore A, colour black2-component tyre, highly-elastic, abrasion-resistant treadrim: heavy pressed steel, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °Cpuncture-proof, maintenance-freeThe wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. The dimensions may change when they are in use.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	125 ～ 618	Up to 35.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Steel	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  623.65 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-V Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Wheel, with Standard Solid Rubber Tyre, with Pressed Steel Rim, Reinforced DesignBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: V seriestyre: standard solid rubber, hardness 80 Shore A, colour blackrim: pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, reduced load capacity over +60 °C

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	102 ～ 318	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	-	Steel	Conductivity	-	-

  Ordinarie pris (exklusive MOMS):

  31.99 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  MISUMI

  Castors for Clean Environment / Plate Type with Swivel

  [Features] This roller is designed for clean rooms and uses a low dusting grease.

  Mer information

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	118 ～ 130	80.01 to 140.00	Not Provided	Nylon / Urethane	Antistatic / Not Provided	Stainless Steel	-

  Ordinarie pris (exklusive MOMS):

  170.03 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Castors / Medium to Heavy Load Type

  [Features] Compatible with industry standard pitch. -Round hole roller for medium duty.

  Mer information

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	79 ～ 100	220.01 to 320.00	Not Provided	Nylon / Phenol / Engineering Plastics	Not Provided	Steel / Stainless Steel	-

  Ordinarie pris (exklusive MOMS):

  19.01 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  KURASHIKI KAKO

  Carry Mount

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	70 ～ 128	35.01 to 80.00 / 140.01 to 220.00	Not Provided	Nylon	Not Provided	Steel / Stainless Steel	Round Hole / Round holes (two holes)

  Ordinarie pris (exklusive MOMS):

  27.60 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara - 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  SPACIO

  Plate Type Resin Frame Castors

  A type of caster that is installed to pipes using mounting hardware such as caster plates or caster bases. The frame is made of resin.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	155 ～ 170	35.01 to 80.00 / 80.01 to 140.00	Not Provided / With Rotation Stopper	Urethane	Not Provided	Steel	-

  Ordinarie pris (exklusive MOMS):

  48.41 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SPACIO

  Plate Type Metal Frame Castors

  A type of caster that is installed to pipes using mounting hardware such as caster plates or caster bases. The frame is made of metal.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	130 ～ 198	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	Not Provided / With Rotation Stopper	Synthetic Rubber / Nylon / Urethane	Not Provided	Steel	-

  Ordinarie pris (exklusive MOMS):

  29.26 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NANSIN

  Silent Master Low Noise Castors, Swivel

  A swivel caster. Silent master casters move quietly and smoothly with an incredibly low levels of force.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	93 ～ 190	35.01 to 80.00 / 80.01 to 140.00	Not Provided	Synthetic Rubber / Elastomer	Not Provided	Steel	Round Hole / Slotted Hole

  Ordinarie pris (exklusive MOMS):

  21.01 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara - 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NANSIN

  Silent Master Whisper Castors Swivel With Stopper

  Superior silence, a whisper caster that is very easy to move (silent master). [Features]· Achieves a high level of silence due to the use of the caster swiveling part, bearing of the wheel rotation part, and the manufacturer's original high repulsion wheels.· Achieves smooth turning through use of radial bearings in the swivel part. Surprisingly easy to move.· Taking indoor use into consideration, this is a lineup of wheels that do not readily leave markings on the floor. [Applications]· Handcarts used by major shipping companies.· Used widely for various carts in hospitals.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	93 ～ 190	35.01 to 80.00 / 80.01 to 140.00	With Rotation Stopper	Synthetic Rubber / Elastomer	Not Provided	Steel	Round Hole / Slotted Hole

  Ordinarie pris (exklusive MOMS):

  24.06 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara - 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  NANSIN

  Stainless Steel Castors SU-TEL Series, Swivel

  [Features]· A stainless steel-made swivel caster.· An industry standard that is highly compatible regardless of the manufacturer.

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	80 ～ 122	Up to 35.00 / 35.01 to 80.00	Not Provided	Synthetic Rubber / Nylon / Urethane / Elastomer	Oil Resistance / Not Provided	Stainless Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  16.50 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  Stainless Steel Castors SU-TEL Series, Swivel with Stopper

  A swivel caster made of stainless steel that includes a stopper. Includes a stopper function that stops rotation of the wheel. An industry standard that is highly compatible regardless of the manufacturer.[Features]· The S-2 stopper stops rotation of the wheel

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	80 ～ 122	35.01 to 80.00	With Rotation Stopper	Synthetic Rubber / Nylon / Urethane / Elastomer	Oil Resistance / Not Provided	Stainless Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  21.82 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  Foot Master Shock Absorbing Castors, Swivel with Stopper

  Includes a stopper function that stops rotation of the wheel. A shock absorbing caster with a built-in rubber cushion.[Features]· Since shocks are absorbed by the caster, vibrations are not transmitted to the rest of the product, such as the wagon.· Since each of the casters moves independently, smooth transport is possible even if the left and right side are at different heights.· Initial movement is smooth since cushioning rubber is used instead of leaf springs or rings.· Settings corresponding to the weight of the load are possible by changing the hardness of the cushioning rubber.· Ideal for LCD glass substrates and transport wagons of silicon wafers that may be damaged by vibrations or shocks.

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	160 ～ 235	Up to 35.00 / 80.01 to 140.00 / 140.01 to 220.00	With Rotation Stopper	Urethane	Oil Resistance	Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  198.72 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  General Castors, TEL Series

  A swivel caster. An industry standard that is highly compatible regardless of the manufacturer.

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	80 ～ 148	Up to 35.00 / 35.01 to 80.00	Not Provided	Synthetic Rubber / Nylon / Urethane / Elastomer	Oil Resistance / Not Provided	Steel	Round Hole / Slotted Hole

  Ordinarie pris (exklusive MOMS):

  6.33 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  General Castors, TEL Series with Swivel Stopper

  A caster with a swivel stopper. Includes a stopper function that stops rotation of the wheel. An industry standard that is highly compatible regardless of the manufacturer.

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	80 ～ 122	Up to 35.00 / 35.01 to 80.00	With Rotation Stopper	Synthetic Rubber / Nylon / Urethane / Elastomer	Oil Resistance / Not Provided	Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  8.67 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  General Castors, TD Series, Swivel

  A swivel caster.

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	56 ～ 65	Up to 35.00 / 35.01 to 80.00	Not Provided	Synthetic Rubber / Nylon / Elastomer	Oil Resistance / Not Provided	Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  4.36 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NANSIN

  General Castors, TE Series with Swivel Stopper

  A caster with a swivel stopper. Includes a stopper function that stops rotation of the wheel.

  Mer information

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	56 ～ 65	Up to 35.00 / 35.01 to 80.00	With Rotation Stopper	Synthetic Rubber / Nylon / Elastomer	Oil Resistance / Not Provided	Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  5.77 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NANSIN

  General Castors, TH Series, Swivel

  A swivel caster.[Features]· The hardware is bright chromate plated.· The TH type and KH type can be used together since their mounting heights are the same.· The wheel of the VH100 mm is made of aluminum

  Mer information

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	72 ～ 130	35.01 to 80.00 / 80.01 to 140.00	Not Provided	Synthetic Rubber / Nylon	Oil Resistance / Not Provided	Steel	Round Hole

  Ordinarie pris (exklusive MOMS):

  8.84 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara - 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera