Filtreringsvillkor

Rensa alla

Lager
Visa endast lagervaror

Application

Type Clamp

Type operation

Operation Direction

Shape

L-Shaped Clamp Lever Shape

Lever Shape with Knob

Mounting Section Type

Rotating Radius R(mm)

25
26
30
33.5
36.2
39
39.9
40
40.1
42
43
44
45
46.5
47.5
47.9
48
50
52.3
55
59.5
60
62
63
63.5
64
64.5
64.9
65
65.2
67
68
70
70.4
71.5
74
75
75.5
76
78
78.5
79
79.5
80
80.2
80.3
81
81.1
82
83
84
84.5
85
87
88
88.1
88.5
89
90
92
93
94.5
95
95.4
96
96.8
97
99
99.9
100
101
102
104
106
108
109
109.9
110
110.9
111
114
115
118
119
120
121
123
123.5
125
126
126.5
127
128
128.5
130
131
132
134
134.5
136
138
140
145
146
148
150
152
157
160
170
180
187.5
190
200
230
300
400

Main Body Material

Main Body Surface Treatment

Mounting Section Material

Mounting Section Surface Treatment

Knob Material

Surface Treatment of knob

Adjustment screw for gap

Mounting Section Diameter d(mm) and/or Diameter

3
M3
4
M4
5
M5
6
M6
6.4(1/4inch)
7.9(5/16inch)
8
M8
9.5(3/8inch)
10
M10
12
M12
14
M14
16
M16
17
20
M20
22
24
M24
25
30
32
M36

Mounting Section Length L(mm)

5
6
7
8
9
10
11
12
12.5
13
14
15
16
17
18
19
20
21
22
23
25
26
26.5
27
29
30
31
32
34
35
36
40
45
47
50
52
55
57
60
63
65
69
70
72
72.5
80
85
86
90
100
120
125
126
132
140
160
190
200
220

[12-50/1mm units]

Mounting Section Diameter C(mm)

Mounting Section Thickness h(mm)

Tillverkare

CAD

Clamping Levers

773 poster

* Information om dagar till leverans, fraktkostnader och priser

Lista

Foto

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

...

Nästa

Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included

KAMPANJFÖRSÄLJNING
Rekommenderad

HALDER

Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included

[Features]· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.· When the lever is released the serrations mesh.· The threaded part can be replaced.· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.· No scratches formed on the applicable parts as the seat surface does not move.· A high amount of pretension can be applied to the threaded part so it will not readily loosen.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Related Components	Clamp Mechanism	-	Horizontal	Shape with Knob	-	-	Male thread	62 ～ 108

Ordinarie pris (exklusive MOMS):

22.38 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Eccentric Quick Clamp Lever Nut Included

Rekommenderad

HALDER

Eccentric Quick Clamp Lever Nut Included

[Features]· Enables quick and reliable attaching and detaching of components.· Adjustable type uses the lock nut to adjust the direction the lever faces.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	N/A	Vertical	L-Shaped	No Set Screw	-	Female Thread	63 ～ 82

Ordinarie pris (exklusive MOMS):

8.69 €～

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)
Stock

MISUMI

Clamp Levers / Threaded

[Features] One of the most versatile clamping levers. [Clamp Type] Clamping mechanism, "working direction" horizontal.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread / Female Thread	45 ～ 93

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Volume Discount
Order quantities extended (D-JIT)

MISUMI

Cam Lever

One quick release lever. [Features]Clamp "Clamp type" cam mechanism, "Working direction" vertical.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	-	Vertical	L-Shaped	No Set Screw	-	Male thread	80

Ordinarie pris (exklusive MOMS):

25.82 €～

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Eccentric Quick Clamp Lever Screw Included

KAMPANJFÖRSÄLJNING

HALDER

Eccentric Quick Clamp Lever Screw Included

[Features]· Enables quick and reliable attaching and detaching of components.· Adjustable type uses the lock nut to adjust the direction the lever faces.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	N/A	Vertical	L-Shaped	No Set Screw	-	Male thread	63 ～ 82

Ordinarie pris (exklusive MOMS):

10.44 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Clamping Levers with Eccentrical Cam, Lever / Stainless Steel / GN 927.5
Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.The lever has been designed to ensure that its movement cannot exceed the max. clamping position.There are no loose components since they are all assembled and mounted in their correct order.The salient points of type A are as follows:The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut. This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 63 ～ 101
Ordinarie pris (exklusive MOMS):
12.36 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	63 ～ 101

KAMPANJFÖRSÄLJNING
Volume Discount
Stock

MISUMI

Resin Clamp Levers / Curved Handle

[Features] A universally applicable clamping lever. [Material] Resin type

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread	48 ～ 92

Ordinarie pris (exklusive MOMS):

5.64 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Stock

NABEYA BI-TECH

Clamp Lever_LDM / LDF / LDR

3 color variation

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp / Operation	Clamp Mechanism	N/A	Horizontal	L-Shaped	Set Screw Type	-	Male thread / Female Thread / Round Hole	45 ～ 108

Ordinarie pris (exklusive MOMS):

7.73 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting
Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.The lever has been designed to ensure that its movement cannot exceed the max. clamping force.There are no loose components since they are all assembled and mounted in their correct order.Type A has the following benefits:The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.With these clamping levers with eccentrical cam GN 927, clamping forces of up to 8 kN can be reached.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 63 ～ 101
Ordinarie pris (exklusive MOMS):
9.98 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Stainless Steel-Clamping levers with eccentrical cam
Stainless Steel-Clamping levers with eccentrical cam GN 927.7 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.The lever has been designed to ensure that its movement cannot exceed the max. clamping force.There are no loose components since they are all assembled and mounted in their correct order.Type A has the following benefits:The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.With these clamping levers with eccentrical cam GN 927.7, clamping forces of up to 8 kN can be reached.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 63 ～ 101
Ordinarie pris (exklusive MOMS):
21.02 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	63 ～ 101

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	63 ～ 101

KAMPANJFÖRSÄLJNING
Volume Discount
Stock

MISUMI

Push Button Clamp Levers

[Features] The serration can be easily loosened by pressing the head of the screw with the thumb.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	Push Button Type	-	Male thread / Female Thread	45 ～ 63

Ordinarie pris (exklusive MOMS):

8.68 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Position Adjustable Clamping Lever Screw Included

KAMPANJFÖRSÄLJNING

HALDER

Position Adjustable Clamping Lever Screw Included

[Features]· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.· When the lever is released the serrations mesh.· The threaded part can be replaced.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Related Components	Clamp Mechanism	-	Horizontal	Shape with Knob	Set Screw Type	Single lever	Male thread	30 ～ 108

Ordinarie pris (exklusive MOMS):

7.46 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)
Stock

MISUMI

Miniature Clamp Levers / Threaded

[Features] A miniature clamping lever with a short lever.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread / Female Thread	30 ～ 42

Ordinarie pris (exklusive MOMS):

7.81 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

MISUMI

Clamp Levers / with Pad / Radiused Tip

A cushioned tip SR clamping lever. [Material]Stainless steel / steel

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread	45 ～ 78.5

Ordinarie avsändningsdatum:

7 arbetsdagar

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)

MISUMI

Clamp Levers / Threaded / with Washer

[Features] One versatile clamping lever with built-in washer.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread	45 ～ 93

Ordinarie pris (exklusive MOMS):

8.57 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

HALDER

Position Adjustable Clamping Lever

[Features]· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.· When the lever is released the serrations mesh.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Related Components	Clamp Mechanism	-	-	L-Shaped	Set Screw Type	Single lever	Male thread / Female Thread	-

Ordinarie pris (exklusive MOMS):

19.15 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)

MISUMI

Resin Clamp Levers / Straight Handle

[Features] A universal clamping lever. [Material] Resin type

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread / Female Thread	45 ～ 92

Ordinarie pris (exklusive MOMS):

4.31 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Flat Tension Levers / With Hexagonal Socket Head / Threaded

KAMPANJFÖRSÄLJNING
Volume Discount

MISUMI

Flat Tension Levers / With Hexagonal Socket Head / Threaded

A flat clamping lever with a hexagon socket head. [Clamp type]Clamping mechanism

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	Shape with Knob	-	Grip Ball	Male thread / Female Thread	80 ～ 180

Ordinarie pris (exklusive MOMS):

24.81 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

HALDER

Cam Clamp

[Features]· Clamp lever position can be freely changed based on selection.· If the thrust washer is removed, this can be used as an infinitely adjustable stopper.· Left rotation type can also be provided through special order.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	Shape with Knob	Set Screw Type	Single lever	Male thread	109

Ordinarie pris (exklusive MOMS):

56.84 €～

Ordinarie avsändningsdatum:

4 arbetsdagar

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Adjustable hand levers, Zinc die casting, with threaded stud steel
Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 30 ～ 108
Ordinarie pris (exklusive MOMS):
4.72 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	30 ～ 108

Volume Discount

IMAO CORPORATION

Clamp Lever (FKF, FKR)

Machine lever for tightening and loosening screws without tools.[Features]・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.・ After tightening, you can turn the lever freely to any position.・ Can be used in tight places where a lever cannot be turned 360°. ・ After screw tightening, the lever can be moved to an arbitrary position.・ Main unit available in 4 colors (silver, black, red and orange).[Applications]・ For position-adjusting parts, such as slides and slotted holes, etc.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	Set Screw Type	-	Male thread / Female Thread	40 ～ 110

Ordinarie pris (exklusive MOMS):

8.39 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Eccentrical cams, radial clamping, Stainless Steel
Eccentrical cams GN 918.5 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - -
Ordinarie pris (exklusive MOMS):
80.88 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
- Volume Discount
GANTER
Eccentrical cams, radial clamping, Steel
Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - -
Ordinarie pris (exklusive MOMS):
54.30 €～
Ordinarie avsändningsdatum:
7 arbetsdagar
Konfigurera
- KAMPANJFÖRSÄLJNING
- Volume Discount
ELESA
MR. - Adjustable handles -Technopolymer
Glass-fibre reinforced polyamide based (PA) technopolymer, black, orange, grey colours, matte finish.Glass-fibre reinforced technopolymer clamping element, AISI 302 stainless steel return spring.Indicated when the lever turning angle is limited owing to lack of space.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 42 ～ 100
Ordinarie pris (exklusive MOMS):
3.72 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
NORELEM
Cam levers, aluminium with external thread, plastic thrust washer and steel or stainless steel stud (04232)
· Cam levers can be used to clamp workpieces quickly and torque-free · Advantage: workpiece needs no further securing · Application fields: machine and assembly construction, rehabilitation and medical technology · Steel or stainless steel version · Colours: black or ruby red
Mer information
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
Clamp Cam Mechanism - - L-Shaped - - - 36.2 ～ 96
Ordinarie pris (exklusive MOMS):
8.10 €～
Ordinarie avsändningsdatum:
4 arbetsdagar
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	-

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	-

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	42 ～ 100

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	-	-	L-Shaped	-	-	-	36.2 ～ 96

Clamp Levers / Stainless Steel / Threaded / Chrome Plated

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)
Stock

MISUMI

Clamp Levers / Stainless Steel / Threaded / Chrome Plated

[Features] A general purpose stainless steel series clamp lever.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	-	-	Male thread / Female Thread	45 ～ 93

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Stock

MISUMI

Double Arm Clamp Levers

[Features] Butterfly-shaped clamping lever. [Material] Available in stainless steel or steel.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	T-Shaped	-	-	Male thread / Female Thread	25

Ordinarie pris (exklusive MOMS):

8.54 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

HALDER

Clamping Lever

[Features]· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.· When the lever is released the serrations mesh.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Related Components	Clamp Mechanism	-	Horizontal	Shape with Knob	Set Screw Type	Single lever	Female Thread	-

Ordinarie pris (exklusive MOMS):

12.80 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Clamping bolts, upward clamping, Steel
Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - -
Ordinarie pris (exklusive MOMS):
48.80 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
- KAMPANJFÖRSÄLJNING
- Volume Discount
ELESA
ERZ. - Adjustable handles -Technopolymer steel or stainless steel clamping element
Adjustable handles.Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. Built-in zinc alloy toothed insert for coupling to the metal clamping element.Indicated when the lever turning angle is limited owing to lack of space.Retaining screw with six-lobed socket to fit TORX® tool
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 44 ～ 95
Ordinarie pris (exklusive MOMS):
3.00 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
KIPP
Cam levers with quick lock (K0751)
· KIPP cam levers can be used to clamp workpieces quickly and torque-free · Advantage: workpiece needs no further securing · Application fields: machine and assembly construction, sheet metal working, fixture construction· Metal plates can be precisely positioned by snapping into the spring clip · Various versions
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 71.5
Ordinarie pris (exklusive MOMS):
16.40 €～
Ordinarie avsändningsdatum:
4 arbetsdagar
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	-

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	44 ～ 95

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	71.5

KAMPANJFÖRSÄLJNING
Volume Discount
Stock

MISUMI

Resin Clamp Levers / with Push Button

A pressure clamp lever made of resin. [Material]Stainless steel / Steel

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	L-Shaped	Push Button Type	-	Male thread	48 ～ 92

Ordinarie pris (exklusive MOMS):

5.94 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)
Stock

MISUMI

Flat Tension Levers

[Features] It is a universal flat clamping lever.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	Horizontal	Shape with Knob	-	Grip Ball	Male thread / Female Thread	100 ～ 150

Ordinarie pris (exklusive MOMS):

27.07 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Volume Discount

MISUMI

Ratcheting Clamp Levers

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Ratchet mechanism	-	Horizontal	L-Shaped	Set Screw Type	-	Male thread	55 ～ 68

Ordinarie pris (exklusive MOMS):

22.00 €～

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- KAMPANJFÖRSÄLJNING
HALDER
No Hold Down Clamp Lever
[Features]· When the ball type set screw is tightened the work piece is pushed to the side and at the same time held down.· A large force in the sideways direction is applied through use of appropriate leverage.
Mer information
CAD:
3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
Clamp Clamp Mechanism - - Other - - Round Hole -
Ordinarie pris (exklusive MOMS):
148.59 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Clamp Mechanism	-	-	Other	-	-	Round Hole	-

LAC. - Cam clamping levers -Technopolymer

KAMPANJFÖRSÄLJNING
Volume Discount

ELESA

LAC. - Cam clamping levers -Technopolymer

Cam clamping leversGlass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.Cam lever is a device which allows a quick and secure clamping.The LAC-R model with adjustable ring-nut (ELESA patent) offers quick and secure clamping.The knurled ring-nut on the base allows to adjust the clamping force applied while locking the lever in the desired position.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	N/A	Vertical	L-Shaped	No Set Screw	-	Male thread / Female Thread	63 ～ 79

Ordinarie pris (exklusive MOMS):

7.02 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
ELESA
MRX. - Adjustable handles -Technopolymer
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.Technopolymer push button, black colour, matte finish.Glass-fibre reinforced technopolymer clamping element, AISI 302 stainless steel return spring.Indicated when the lever turning angle is limited owing to lack of space.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 42 ～ 100
Ordinarie pris (exklusive MOMS):
2.53 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
- Volume Discount
GANTER
Adjustable hand levers for set collars (GN 311)
For set collars of the standard families GN 706... and GN 707..., the adjustable hand levers GN 311 replace the hexagon socket screw DIN 912. That allows the set collars to be adjusted easily and quickly without tools.The table of dimensions of the set collars shows the corresponding hand lever for the respective set collar size d1.Under GN 706.4, semi-split set collars GN 706.2 are generally offered with clamping levers.
Mer information
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 30 ～ 45
Ordinarie pris (exklusive MOMS):
12.40 €～
Ordinarie avsändningsdatum:
7 arbetsdagar
Konfigurera

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	42 ～ 100

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
-	-	-	-	-	-	-	-	30 ～ 45

Volume Discount

IMAO CORPORATION

Cam Lever (KCL, KCLS, KCLF)

Once screwed in proper position, clamping / unclamping can be done by lever up / down operation. Excellent rust prevention stainless steel type.

Mer information

CAD:: 2D; /3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Clamp	Cam Mechanism	-	Vertical	L-Shaped	No Set Screw	-	Male thread / Female Thread	70.4 ～ 96

Ordinarie pris (exklusive MOMS):

16.60 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

HALDER

Eccentric Lever Shaft Pin Included

[Features]· Operating temperature range: plastic grip type maximum 60°C.

Mer information

CAD:: 3D

Application	Type Clamp	Type operation	Operation Direction	Shape	L-Shaped Clamp Lever Shape	Lever Shape with Knob	Mounting Section Type	Rotating Radius R(mm)
Related Components	Clamp Mechanism	-	-	Shape with Knob	-	-	Round Hole	114 ～ 157

Ordinarie pris (exklusive MOMS):

28.95 €～

Ordinarie avsändningsdatum:

2 arbetsdagar

Konfigurera

- KAMPANJFÖRSÄLJNING
- Volume Discount
GANTER
Clamping bolts, downward clamping, Steel
Clamping bolts GN 918.2 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.Clamping bolts have the advantage that they can be turned after releasing in the clamping zone. The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - -
Ordinarie pris (exklusive MOMS):
48.80 €～
Ordinarie pris (exklusive MOMS):
Specialpris
Ordinarie avsändningsdatum:
Lagervara: 1 arbetsdag
Vissa artiklar kan skickas samma dag
Konfigurera
- Volume Discount
GANTER
Adjustable Stainless Steel-Hand levers, threaded stud
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - -
Ordinarie pris (exklusive MOMS):
63.06 €～
Ordinarie avsändningsdatum:
7 arbetsdagar
Konfigurera
KIPP
Cam levers stainless steel with external thread, thrust washer stainless steel (K0645)
· Cam levers can be used to clamp workpieces quickly and torque-free · Advantage: workpiece needs no further securing · Application fields: machine and assembly construction, rehabilitation and medical technology, foodstuff industry· No clamping force losses due possible creep tendency · Versions: electropolished or abrasive blasted
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 36.2 ～ 96
Ordinarie pris (exklusive MOMS):
13.57 €～
Ordinarie avsändningsdatum:
4 arbetsdagar
Konfigurera
KIPP
Clamping levers internal thread stainless steel (K0124)
· The KIPP clamping lever stands for reliability, stability and versatility· Makes it easier to clamp individual components and complete machine parts· Application fields: machine construction, rehabilitation and medical technology, food industry, pharmaceutical industry, chemical industry, outdoors· Surface: electropolished or abrasive blasted· Different thread sizes and handle lengths
Mer information
CAD:
2D
/3D
Application Type Clamp Type operation Operation Direction Shape L-Shaped Clamp Lever Shape Lever Shape with Knob Mounting Section Type Rotating Radius R(mm)
- - - - - - - - 40 ～ 110
Ordinarie pris (exklusive MOMS):
14.11 €～
Ordinarie avsändningsdatum:
4 arbetsdagar
Konfigurera