Dryers（Control Side Connection Types：Rc(R)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Refrigerated Air Dryer Refrigerant Used R134a (HFC) IDFA□E Series for EU/Asia/Oceania
SMC
Air dryer with improved corrosion resistance due to the use of stainless-steel heat exchanger.
[Features]
· Power supply voltage: Single-phase 230 V AC (50 Hz) *Single-phase 200 V AC (50 Hz) for IDFA6E only.
· Power supply voltage: Single-phase 200/220 V AC (60 Hz) selectable.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,016.01 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
IDG, Membrane Air Dryer
SMC
Use of a hollow fiber membrane makes it possible to easily supply dry air.
Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
[Features]
· Energy saving.
& nbspPurge air flow reduced by up to 39 L/min (ANR).
· Space saving.
& Flexible mounting orientation, IDG1 Series is easy to install in narrow spaces.
· High performance.
& Time to reach standard dew point reduced by 40 minutes.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 229.76 € Special price Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Refrigerated Air Dryer, Refrigerant R134a (HFC) High Temperature Air Inlet, IDU□E Series
SMC
Refrigerated air dryer that protects pneumatic equipment from moisture.
[Features]
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Improved corrosion resistance with the use of stainless-steel heat exchanger.
· High-temperature intake air type.
· IDU-□E-10: Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz).
· IDU-□E-20: Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz).
· IDU-□E-23: Single-phase 230 V AC (50 Hz).- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2,111.02 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
IDH, Thermo-dryer
SMC
Thermo-dryer is able to provide compressed air under the same conditions and with the same quality regardless of the season.
[Features]
· Stable supply of temperature- and pressure-controlled dry clean air.
· Power supply can be used all over the world.
· Compact and space saving.
· Can be installed close to a wall.
· Power supply voltage: Single-phase 100/200/230 V AC (50/60 Hz).
· RoHS compliant.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4,882.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Heatless Air Dryer ID20 / ID30 / ID40 / ID60
SMC
Heatless air dryer that is ideal for applications that require dry air with a low dew point.
[Features]
· Supplies dry air with a low dew point of -30°C or less.
· Small and lightweight without heater and electric control panel.
· Use the indicator to check the outlet dew point. (Self-regenerative type enables easy maintenance.)
· Standard size: 20, 30, 40, 60.
· Thread type: Rc, G, NPT.
· Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz), Single-phase: 110 V AC (50 Hz).
· Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz), Single-phase: 220 V AC (50 Hz).- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3,018.11 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Membrane Air Dryer, Unit Type IDG□A Series
SMC
Use of a hollow fiber membrane makes it possible to easily supply dry air.
Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
[Features]
· Energy saving.
& nbspPurge air flow reduced by up to 39 L/min (ANR).
· Space saving.
· High performance.
& Time to reach standard dew point reduced by 40 minutes.
· Adopted a new air combination that reduces required maintenance space and weight.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,450.71 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Membrane Air Dryer, Unit Type IDG Series
SMC
Dryer that uses a hollow fiber membrane for easy supply of dry air.
[Features]
· Energy saving.
· Purge air flow reduced by up to 39 L/min (ANR).
· Space saving.
· High performance.
· Time to reach reference dew point reduced by 40 minutes.
· Adopts a new air combination that reduces required maintenance space and weight.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 645.70 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Refrigerated Air Dryer IDFA60 / 70 / 80 / 90 Series for Use in Europe, Asia and Oceania
SMC
This is a Refrigerated Air Dryer IDFA60/70/80/90 Series for Use in Europe, Asia and Oceania.
[Features]
・ Usable in high temperature environments
・ Increased air flow rate capacity
・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
・ Improved maintainability
・ Improved resistance to contaminants and longer lifespan for the auto drain valve
・ It protects pneumatic equipment from moistureConfigure nowStarting from∗ ： 3,388.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series
SMC
Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger.
[Features]
· Protects pneumatic equipment from moisture.
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Air flow capacity increased up to 40%.
· Power consumption reduced up to 40%.
· Energy-saving design.
· Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).
· Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E).
· Outlet air pressure dew point: 10°C.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6,747.23 € Min. Shipping Days ： 98 Days *Unit price with basic configuration
-
- Promotional pricing
IDG-A, Membrane Air Dryer Series
SMC
Use of a hollow fiber membrane makes it possible to easily supply dry air.
Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
[Features]
· Energy saving.
& nbspPurge air flow reduced by up to 39 L/min (ANR).
· Space saving.
& nbspOverall length reduced by up to 59 mm.
· High performance.
& Time to reach standard dew point reduced by 40 minutes.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,250.47 € Special price Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Refrigerated Air Dryer IDF60 / 70 / 80 / 90 Series
SMC
This is a Refrigerated Air Dryer IDF60/70/80/90 Series.
[Features]
・ Usable in high temperature environments
・ Increased air flow rate capacity
・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
・ Improved maintainability
・ Improved resistance to contaminants and longer lifespan for the auto drain valve
・ It protects pneumatic equipment from moistureConfigure nowStarting from∗ ： 3,061.60 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Compact Dryer Fiber Dry Resin Dryer Unit Type
NIHON PISCO
[Features]
· Connects by sensing the filter in the middle of the hollow fiber membrane type air dryer pipe without requiring power supply.
· Water droplets removed from the refrigerated dry air are discharged in the form of water vapor.
· One-touch fitting is built-in to enable regulation of the purged air flow which cannot be drained.- 3D CAD data available
Configure nowStarting from∗ ： 971.65 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Compact Dryer Fiber Dry Metal Dryer Unit Type
NIHON PISCO
[Features]
· Connects by sensing the filter in the middle of the hollow fiber membrane type air dryer pipe without requiring power supply.
· Water droplets removed from the refrigerated dry air are discharged in the form of water vapor.
· One-touch fitting is built-in to enable regulation of the purged air flow which cannot be drained.- 3D CAD data available
Configure nowStarting from∗ ： 523.98 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Refrigerated Air Dryer, Refrigerant R134a (HFC) Standard Temperature Air Inlet, IDF□E Series
SMC
Refrigerated air dryer that protects pneumatic equipment from moisture.
[Features]
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Air flow capacity increased up to 40%.
· Power consumption reduced up to 40%.
· Energy-saving design.
· Improved corrosion resistance with the use of stainless-steel heat exchanger.
· Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2,254.26 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100F / 125F / 150F Series
SMC
Refrigerated air dryer with energy-saving design that can be used in a high-temperature environment (ambient temperature up to 45°C).
[Features]
· Air-cooled/water-cooled.
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Ambient temperature up to 45°C with air-cooled specification.
· Energy-saving design: Dryer exhaust heat reduced by up to 25%.
· Reduced exhaust heat for more compact design of air conditioners and energy-saving operation.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 18,189.23 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Refrigerated Air Dryer, Refrigerant R407C (HFC) High Temperature Air Inlet, IDU□E Series
SMC
Refrigerated air dryer that protects pneumatic equipment from moisture.
[Features]
· Removes the vapor from the moist compressed air delivered by the compressor and prevents it from causing the pneumatic equipment to fail.
· Improved corrosion resistance with the use of stainless-steel heat exchanger.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5,372.34 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100FS / 125FS / 150FS Series
SMC
Refrigerated air dryer for high-temperature environments.
[Features]
· Double energy-saving function series that saves up to 76% energy by using a second re-heater and digital scroll compressor.
· Exhaust heat: Reduced by up to 25%.
· Ambient temperature: Up to 45°C.
· Inlet air temperature: Up to 60°C.
· ECO switch.
· Switch between energy-saving operation mode and normal operation mode depending on the season and operating environment.
· RoHS compliant.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 27,532.13 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
IDFA3~75E, Refrigerated Air Dryer
SMC
Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger.
[Features]
· Power supply voltage: Single-phase 230 V AC (50 Hz).
· Auto drain: Float type (normally open).
· Coating color: Body panel: urban white 1, Base: urban gray 2.
· Compliant standards: EC directive (CE marking).- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3,009.41 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
IDFA100 / 125 / 150F, Refrigerated Air Dryer, Large Sizes
SMC
Refrigerated air dryer for high-temperature environments.
[Features]
· Ambient temperature: Up to 45°C.
· Inlet air temperature: Up to 60°C.
· Energy-saving design.
· Uses a corrosion-resistant stainless steel heat exchanger that reduces exhaust heat by up to 25% to prevent the ambient temperature from rising.
· Size: 100F, 125F, 150F.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9,806.83 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Refrigerated Air Dryer IDFC60 / 70 / 80 / 90 Series for Use in Southeast Asia
SMC
This is a Refrigerated Air Dryer IDFC60/70/80/90 Series for Use in Southeast Asia.
[Features]
・ This product can be used in high temperature environments in tropical regions
・ Increased air flow rate capacity
・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
・ Improved maintainability
・ Improved resistance to contaminants and longer lifespan for the auto drain valveConfigure nowStarting from∗ ： 7,325.27 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Method |
| Shape |
| Unit combination |
| Exit Flow Rate [Distinction](l/min) |
| Exit Flow Rate(l/min) |
| Exit Air Atmospheric Pressure Dew Point(°C) |
| Supply Side, Connection Type |
| Air Temperature at the Inlet Port(°C) |
| Air Pressure at the Inlet Port Side(MPa) |
| Supply Side, Nominal Designation of Piping Thread |
| Supply Side Connection Tube Diameter |
| Supply Side, Nominal Designation of Pipe Flange |
| Control Side Connection Types |
| Control SideNominal Pipe Threads |
| Control Side Connection Tube Diameter |
| Control Side Nominal The Pipe Flange |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | NIHON PISCO | NIHON PISCO | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | Refrigerated Air Dryer Refrigerant Used R134a (HFC) IDFA□E Series for EU/Asia/Oceania | Refrigerated Air Dryer, Refrigerant R134a (HFC) High Temperature Air Inlet, IDU□E Series | Refrigerated Air Dryer IDFA60 / 70 / 80 / 90 Series for Use in Europe, Asia and Oceania | Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series | Refrigerated Air Dryer, Refrigerant R134a (HFC) Standard Temperature Air Inlet, IDF□E Series | Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100F / 125F / 150F Series | Refrigerated Air Dryer, Refrigerant R407C (HFC) High Temperature Air Inlet, IDU□E Series | Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100FS / 125FS / 150FS Series | Refrigerated Air Dryer IDFC60 / 70 / 80 / 90 Series for Use in Southeast Asia | |||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | 1,016.01 € Special price *Unit price with basic configuration Promotional pricing | 229.76 € Special price *Unit price with basic configuration Promotional pricing | 2,111.02 € *Unit price with basic configuration | 4,882.26 € *Unit price with basic configuration | 3,018.11 € *Unit price with basic configuration | 1,450.71 € *Unit price with basic configuration | 645.70 € *Unit price with basic configuration | 3,388.66 € *Unit price with basic configuration | 6,747.23 € *Unit price with basic configuration | 1,250.47 € Special price *Unit price with basic configuration Promotional pricing | 3,061.60 € *Unit price with basic configuration | 971.65 € *Unit price with basic configuration | 523.98 € *Unit price with basic configuration | 2,254.26 € *Unit price with basic configuration | 18,189.23 € *Unit price with basic configuration | 5,372.34 € *Unit price with basic configuration | 27,532.13 € *Unit price with basic configuration | 3,009.41 € *Unit price with basic configuration | 9,806.83 € *Unit price with basic configuration | 7,325.27 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | 4 Days | 26 Days | 4 Days | 26 Days | 26 Days | 26 Days | 4 Days | 98 Days | 26 Days | 26 Days | 11 Days | 11 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 4 Days | 26 Days |
| Type | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer Unit | Dryer Unit | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer | Dryer | - | Dryer | Dryer |
| Method | Refrigerating type | Hollow Fiber Type | Refrigerating type | Refrigerating type | Desiccant type heatless | Hollow Fiber Type | Hollow Fiber Type | Refrigerating type | Refrigerating type | Hollow Fiber Type | Refrigerating type | Hollow Fiber Type | Hollow Fiber Type | Refrigerating type | Refrigerating type | Refrigerating type | Refrigerating type | Refrigerating type | Refrigerating type | Refrigerating type |
| Shape | Standard | Standard / Flexible | Standard | Standard | Standard | Unit | Unit | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Unit combination | - | - | - | - | - | Oil Mist Filter + Micro Oil Mist Filter + Dryer / Oil Mist Filter + Micro Oil Mist Filter + Dryer + Regulator | Oil Mist Filter + Micro Oil Mist Filter + Dryer / Oil Mist Filter + Micro Oil Mist Filter + Dryer + Regulator / Micro Oil Mist Filter + Dryer / Micro Oil Mist Filter + Dryer + Regulator | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Exit Flow Rate [Distinction](l/min) | Up to 2,000 ～ Up to 5000 | Up to 50 ～ Up to 1000 | Up to 2,000 ～ Up to 5000 | Up to 400 ～ Up to 1000 | Up to 200 | Up to 50 ～ Up to 500 | Up to 50 ～ Up to 1000 | More than 5000 | More than 5000 | Up to 50 ～ Up to 500 | More than 5000 | Up to 300 | Up to 100 | Up to 2,000 ～ Up to 1000 | More than 5000 | More than 5000 ～ Up to 5000 | More than 5000 | More than 5000 ～ Up to 5000 | More than 5000 | More than 5000 |
| Exit Flow Rate(l/min) | 1,083 ～ 833 | 1,000 ～ 750 | 1,100 ～ 820 | 400 ～ 600 | 155 | 50 ～ 500 | 1,000 ～ 750 | 12,000 ～ 15000 | 5,700 ～ 6,100 | 50 ～ 500 | 6,100 ～ 15500 | 300 | 100 | 1,220 ～ 570 | 16,000 ～ 18,800 | 3,900 ～ 12,500 | 16,000 ～ 18,800 | 3,033 ～ 13,700 | 14,333 ～ 20,167 | 3,100 ～ 15400 |
| Exit Air Atmospheric Pressure Dew Point(°C) | 3 ～ 10 | -20 ～ -15 | 10 | 10 | -50 | -60 ～ -15 | -20 ～ -15 | 3 ～ 7 | 10 | -60 ～ -15 | - | - | - | 10 | 10 | 10 | 10 | 3 ～ 10 | 3 ～ 10 | 3 ～ 20 |
| Supply Side, Connection Type | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) |
| Air Temperature at the Inlet Port(°C) | 35 | 25 | 55 | 35 | 5 to 50 | 25 | 25 | 35 | 35 | 25 | 35 ～ 40 | 40 | 40 | 35 | 40 | 55 | 40 | 35 | 35 ～ 40 | 50 |
| Air Pressure at the Inlet Port Side(MPa) | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | - | 0.7 | 0.7 | - | 0.85 | 0.85 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | - |
| Supply Side, Nominal Designation of Piping Thread | 3/8 / 1/2 / 3/4 / 1 | 1/8 / 1/4 / 3/8 / 1/2 | 3/8 / 1/2 / 3/4 / 1 | 1/2 | 1/2 | 1/4 / 3/8 / 1/2 | 1/8 / 1/4 / 3/8 / 1/2 | 1 / 1 1/2 / 2 | 1 1/2 | 1/4 / 3/8 / 1/2 | 1 / 2 | 3/8 | 1/4 | 3/8 / 1/2 / 3/4 | 2 | 1 / 2 | 2 | 1 / 1 1/2 / 2 | 2 / Other | 2 |
| Supply Side Connection Tube Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Supply Side, Nominal Designation of Pipe Flange | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Control Side Connection Types | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) | Rc(R) |
| Control SideNominal Pipe Threads | 3/8 / 1/2 / 3/4 / 1 | 1/8 / 1/4 / 3/8 / 1/2 | 3/8 / 1/2 / 3/4 / 1 | 1/2 | 1/2 | 1/4 / 3/8 / 1/2 | 1/8 / 1/4 / 3/8 / 1/2 | 1 / 1 1/2 / 2 | 1 1/2 | 1/4 / 3/8 / 1/2 | 1 / 2 | 3/8 | 1/4 | 3/8 / 1/2 / 3/4 | 2 | 1 / 2 | 2 | 1 / 1 1/2 / 2 | 2 / Other | 2 |
| Control Side Connection Tube Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Control Side Nominal The Pipe Flange | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
- Dryer
- Dryer Unit
- Related components (indicator)
-
Method
-
Shape
-
Unit combination
- Air Filters + Dryer
- Oil Mist Filter + Micro Oil Mist Filter + Dryer
- Oil Mist Filter + Micro Oil Mist Filter + Dryer + Regulator
- Micro Oil Mist Filter + Dryer
- Micro Oil Mist Filter + Dryer + Regulator
-
Exit Flow Rate [Distinction](l/min)
- Up to 2,000
- Up to 50
- Up to 100
- Up to 200
- Up to 300
- Up to 400
- Up to 500
- Up to 1000
- More than 5000
- Up to 5000
* ~5 represents over 1、and 5 or less.
-
Exit Flow Rate(l/min)
- 1,000
- 1,083
- 1,100
- 1,200
- 1,220
- 1,320
- 1,333
- 1,383
- 1,500
- 1,517
- 1,683
- 1,700
- 1,867
- 2,000
- 2,533
- 2,600
- 2,800
- 3,033
- 3,100
- 3,850
- 3,900
- 4,233
- 4,300
- 4,550
- 5,700
- 5,783
- 6,100
- 6,366
- 6,500
- 7,200
- 8,400
- 8,500
- 9,800
- 10
- 11,000
- 12,000
- 12,500
- 13,700
- 14,333
- 16
- 16,000
- 18,333
- 18,800
- 20,100
- 20,167
- 22,333
- 23,700
- 25
- 25,000
- 30
- 30,000
- 40
- 50
- 75
- 80
- 100
- 110
- 150
- 155
- 170
- 200
- 240
- 250
- 283
- 300
- 320
- 330
- 370
- 400
- 500
- 517
- 520
- 567
- 570
- 600
- 750
- 767
- 820
- 833
- 3400
- 5000
- 5200
- 5300
- 6000
- 6800
- 8000
- 9200
- 10900
- 13500
- 15000
- 15400
- 15500
-
Exit Air Atmospheric Pressure Dew Point(°C)
-
Supply Side, Connection Type
-
Air Temperature at the Inlet Port(°C)
-
Air Pressure at the Inlet Port Side(MPa)
-
Supply Side, Nominal Designation of Piping Thread
-
Supply Side Connection Tube Diameter
-
Supply Side, Nominal Designation of Pipe Flange
-
Control Side Connection Types
-
Control SideNominal Pipe Threads
-
Control Side Connection Tube Diameter
-
Control Side Nominal The Pipe Flange
Brand
-
- SMC (18)
- NIHON PISCO (2)
- CKD (0)
- FESTO (0)
- PREVOST (0)
CAD data type
-
- 2D
- 3D
Categories related to Dryers
-
- Cylinders, Rotary Actuators
- Cylinder Connecting Components
- Filters, Regulators, Lubricators
- Solenoid Valves
- Electromagnetic Valves
- Pneumatic Pipe Fittings
- Speed Controllers
- Silencers
- Manual-Type Valves, Mechanical-Type Valves
- Tubes
- Fluororesin Products for Chemicals
- Pressure, Flow Rate Sensors
- Dryers
- Compressors, Blowers
- Other Pneumatic Devices
-
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.