Rotary / Swivel Joints

• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  GANTER

  Swivel ball joints

  GN 784 swivel ball joints allow precise and variable adjustment of the ball pivot within the rotation range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc. Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no.1). The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above. For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.

  Mer information

  CAD:

  2D

  /3D

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  47.86 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  GANTER

  Flanges for swivel ball joints GN 784

  The GN 784.1 flanges are mounted from below onto the GN 784 swivel ball joints GN 784. A half-length tapered groove pin prevents any rotation.The flange enables the swivel ball joints to be mounted on the upper surface. The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used. The half-length tapered groove pin is mounted on the flange. The countersunk screw is included separately.

  Mer information

  CAD:

  2D

  /3D

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  13.16 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  IHARA SCIENCE

  Swivel Joint SJH Shape

  Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.[Features]· Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.· In order to handle extreme applications, the rotor outer surface (the rotation sliding part) is treated with surface hardener, and a slipper seal with extremely low wear is used in order to suppress co-rotation of the O-ring and to prevent wear.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	95	-	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  170.27 €～

  Ordinarie avsändningsdatum:

  24 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Spail Joint AS Series

  The AS Series swivel joint main units can be used rotated 360 degrees. These fittings can be used as stainless steel screw-in type joints in movable pipe lines. .[Features]· The pearl swivel joint can be used rotated 360 degrees. Double row ball bearings are incorporated into the bearings. These bearings are grease-lubricated. Therefore, the bearing has a high mechanical strength that can withstand large radial thrust and moment loads.· A ring-shaped packing (other than an O-ring) is used in the seals. This provides a stable, simple-structured seal with no leakage of the internal pressurized fluid.· The PK type use high temperature-resistant PTFE materials on the seal rings. Therefore, this type does not require any lubricating.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100 ～ 180	4.1	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  175.09 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Coupling Pearl Swivel Joint, PK Series

  The PK series of swivel joints are capable of 360-degree rotation. They can be used with the PK movable pipeline, carrying fluids up to 230 degrees C.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Vapor / Gas / Oil	230	2.3	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  141.57 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint ACFW (Double Entry Internal Pipe Rotation Flange-Mounted Type)

  [Features]· ACFW (Dual, flanged type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Rotary Type	Water / Air / Vapor / Oil	180	1.47	150	Thread-to-Flange Connection	Rc	Rc	-

  Ordinarie pris (exklusive MOMS):

  1,196.58 €～

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint NC (Both Directions Inner Tube Fixed Screw-in Type)

  NC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Vapor / Oil	180	1.47	150 ～ 300	Thread-to-Thread, Connection	Rc	Rc	R

  Ordinarie pris (exklusive MOMS):

  233.65 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  IHARA SCIENCE

  Swivel Joints - SJM Type

  [Features]· Swivel joint for general hydraulics. Effective anti-torsion measure for hydraulic hoses that offers improved durability.· The shape of the connection portion can be supported more easily than the shape of the equipment and the hose.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	95	-	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  102.33 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Swivel Joint, A Series

  The A series of swivel joints are capable of 360-degree rotation. They can be used with ductile cast-iron (partial carbon steel) screw-in movable pipelines.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100 ～ 180	4.1	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  125.76 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Swivel Joint, C Series

  The C series includes swivel joints capable of 360 degree rotation that can be used with the steel body (welded) flange type movable piping line-up.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100 ～ 160	2.1	-	Flange-to-Flange connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  458.53 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Refractive Joint Pearl Swivel Joint CS Series (Made of SUS)

  The CS series is a swivel joint made of welded stainless steel (SUS), used for flanged movable pipelines, and capable of 360° rotation.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100 ～ 180	2.1	-	Flange-to-Flange connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  585.53 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Swivel Joint B Series

  B series is a swivel joint for which the main unit can be used with a 360 degree rotation that can be used as a steel (welded) screw-in type movable pipe line.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100	13.7	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  194.81 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Swivel Joint, SRK Series

  The SRK series of swivel joints are capable of 360-degree rotation. They can be used with steel (welded) screw-in movable pipelines.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100	34.3	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  340.15 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Refraction Fitting Pearl Swivel Joint SSH Series (Made of SUS)

  SSH series (SUS) is a swivel joint for which the main unit can be used with a 360 degree rotation that can be used as a movable pipe line.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Water / Air / Gas / Oil	100	34.3	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  789.42 €

  Ordinarie avsändningsdatum:

  24 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint ACL (Single Direction Screw-in Type)

  ACL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Vapor / Oil	180	1.47	150 ～ 300	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  269.19 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Fitting Pearl Rotary Joint AC (Duplex Inner Tube Fixed Screw-Mounted Type)

  AC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Vapor / Oil	180	1.47	150 ～ 300	Thread-to-Thread, Connection	Rc	Rc	R

  Ordinarie pris (exklusive MOMS):

  281.71 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Fitting Pearl Rotary Joint, ACF (Bidirectional Inner Tube Fixed Flange-Mounted Type)

  ACF (Dual, flanged type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Vapor / Oil	180	1.47	150 ～ 300	Thread-to-Flange Connection	Rc	Rc	-

  Ordinarie pris (exklusive MOMS):

  322.44 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint ACW (Both Directions Inner Tube Rotation Screw-in Type)

  ACW (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Rotary Type	Water / Air / Vapor / Oil	180	1.47	300	Thread-to-Thread, Connection	Rc	Rc	R

  Ordinarie pris (exklusive MOMS):

  826.22 €～

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint NCL (Single Direction Screw-in Type)

  NCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Vapor / Oil	180	1.47	150 ～ 300	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  224.42 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint KCL (Single Direction Screw-in Type)

  KCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Gas / Oil	100	0.98	1000 ～ 1500	Thread-to-Thread, Connection / Thread-to-Flange Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  115.89 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint KC (Both Directions Inner Tube Fixed Screw-in Type)

  [Features]- Model KC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Vapor / Gas / Oil	100	0.98	1000 ～ 1500	Thread-to-Thread, Connection	Rc	Rc	R

  Ordinarie pris (exklusive MOMS):

  142.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint SKCL (Single Direction Screw-in Type)

  SKCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Gas / Oil	100	0.98	1500	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  162.10 €

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE1000 (Single Direction Screw-in Type)

  RXE1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Vapor / Gas / Oil	100	1.18 ～ 2.25	750 ～ 3500	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  127.78 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXH1000 (Single Direction Screw-in Type)

  RXH1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.[Features]・The pearl rotary joint RX series features excellent durability and very high performance and two types are available: the RXE and RXH, each designed for different conditions of use. A fine ceramic and carefully selected carbon seal ring are incorporated as a sealing material in this instrument, and thus high speed rotation and low torque are achieved along with ultra-precise lapping within two light bands of the sealing surface. Tracking of a high speed floating ring is achieved by adopting a floating seal ring with a detent key groove, and long-term seal stability is achieved. · Main Body

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Oil	150	1.18 ～ 2.25	750 ～ 3500	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  160.67 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE2100 (Single Direction Flange-Mounted Type)

  RXE2100 (Single, flanged type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Vapor / Gas / Oil	100	1.18 ～ 2.25	750 ～ 3500	Thread-to-Flange Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  192.16 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXH2100 (Single Direction Flange-Mounted Type)

  RXH2100 (Single, flanged type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Oil	150	1.18 ～ 2.25	750 ～ 3500	Thread-to-Flange Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  233.02 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE1300 (Single Direction Screw-in Type)

  RXE1300 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Vapor / Gas / Oil	100	1	3500	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  157.38 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE3000 (Both Directions Inner Tube Fixed Screw-in Type)

  RXE3000 (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Gas / Oil	100	1.18 ～ 2.25	750 ～ 3500	Thread-to-Thread, Connection	Rc	Rc	R / G / M / NPT / UNF / UNS / UN

  Ordinarie pris (exklusive MOMS):

  158.01 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXH3000 (Both Directions Inner Tube Fixed Screw-in Type)

  RXH3000 (Dual, screwed type, with fixed inner tube) is a rotary joint designed to stably supply a medium to rotary equipment.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Oil	150	1.18 ～ 2.25	750 ～ 3500	Thread-to-Thread, Connection	Rc	Rc	R / G / M / NPT / UNF / UNS / UN

  Ordinarie pris (exklusive MOMS):

  188.88 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE5000 (Both Directions Inner Tube Rotation Screw-in Type)

  RXE5000 (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Rotary Type	Water / Air / Gas / Oil	100	1.67 ～ 2.25	2000 ～ 3500	Thread-to-Thread, Connection	Rc	Rc	R / G / M

  Ordinarie pris (exklusive MOMS):

  161.30 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXH5000 (Both Directions Inner Tube Rotation Screw-in Type)

  RXH5000 (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Rotary Type	Water / Oil	150	1.67 ～ 2.25	2000 ～ 3500	Thread-to-Thread, Connection	Rc	Rc	R / G / M

  Ordinarie pris (exklusive MOMS):

  192.16 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXH6100 (Both Directions Inner Tube Rotation Flange-Mounted Type)

  RXH6100 (Dual, flanged type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Rotary Type	Water / Oil	150	1.18 ～ 2.25	750 ～ 3500	Thread-to-Flange Connection	Rc	Rc	-

  Ordinarie pris (exklusive MOMS):

  244.15 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint RXE1000SUS (Single Direction Screw-in Type)

  RXE1000SUS (Singe, screwed type) is a rotary joint designed to stably supply a medium to rotary equipment.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Air / Gas / Oil	100	2.25	3500	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  320.42 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Joint Pearl Rotary Joint SXO Series Straight Type

  SXO series (Straight type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.[Features]· Lightweight and compact for easy handling.· Simple sealing structure for easy maintenance.· Superior sealing performance achieved via ultra-precise finish.· Supports high pressure and high speed applications.· Use of a high grade seal (TCC) is also supported for a higher load specification

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Water / Oil	120	6.9	10000	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  233.02 €～

  Ordinarie avsändningsdatum:

  15 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Fitting Pearl Rotary Joint, RXE / RXH4100 (Duplex Inner Tube Fixed Flange-Mounted Type)

  With respect to the RXE/RXH4100 (bidirectional inner tube fixed flange-mounted type) and the Pearl Rotary Joint RX Series have excellent durability and extremely high performance. There are two types of RXE RXH available that fit the usage conditions.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Gas / Oil	100 ～ 150	1.18 ～ 2.25	750 ～ 3500	Thread-to-Flange Connection	Rc	Rc	-

  Ordinarie pris (exklusive MOMS):

  209.36 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SHOWA GIKEN INDUSTRIAL

  Pressure Rotary Fitting Pearl Rotary Joint KCF (Flange-Mounted Type)

  KCF (Flanged type) is a rotary joint designed to stably supply a medium to rotary equipment.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Duplex Inner Tube Fixed Type	Water / Air / Vapor / Gas / Oil	100	0.98	1000 ～ 1500	Thread-to-Flange Connection	Rc	Rc	-

  Ordinarie pris (exklusive MOMS):

  207.97 €～

  Ordinarie avsändningsdatum:

  11 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  BRIDGESTONE

  Swivel Joints JL-DC Series

  For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  80.04 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  BRIDGESTONE

  Swivel Joint JL-GC Series

  For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  87.48 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  BRIDGESTONE

  Swivel Joint JL-KC Series

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  75.56 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  BRIDGESTONE

  Swivel Joint JL-CC Series

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  87.68 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  BRIDGESTONE

  Swivel Joints, JL-DD Series

  For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  117.49 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  BRIDGESTONE

  Swivel Joints, JL-CG Series

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as a fluid

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  102.71 €

  Ordinarie avsändningsdatum:

  46 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  BRIDGESTONE

  Rotary Joint JR-DC Series

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Simplex	Oil	100	20.5	10	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  126.67 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  IHARA SCIENCE

  Swivel Joint SJS Type

  Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.[Features]· Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.· SJS type.· A product with a simple structure intended for general use.· SJH type.· The rotor peripheral surface, which is a rotating and sliding part, has been surface hardened in order to withstand harsh use, and a slipper seal with a very low degree of wear is used to suppress the drag of the O-ring and thus prevent wear.· SJM type.A product that is a straight swivel joint that rotates easily due to the placement of a steel ball in a sliding part.

  Mer information

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Oil	95	-	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  49.08 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  IFIELD

  Sling Swivels, Female Threaded to Male Threaded

  [Features]● Can be easily installed and removed using a hex bar wrench to/from narrow spaces, including deeper spaces.● Application (IN, OUT, etc.) are identified by color. "1 axis × 360 degree" rotation and free angle setting.

  Mer information

  CAD:

  2D

  Type	Applicable Fluids	Maximum Operating Temperature(°C)	Max Operating Pressure(MPa)	Max. Rotational Speed(r.p.m)	Connection Type	Types of Connection Screw for Supply Side (Composite)	Types of Connection Screw for Exhaust Side (Composite)	Types of Connection Screw for Rotor Side (Composite)
  Swivel Joints	Air	60	1	-	Thread-to-Thread, Connection	-	-	-

  Ordinarie pris (exklusive MOMS):

  14.11 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera