Insert

• 

  Thread Inserts - Tangless (20)

• 

  Thread Inserts (259)

• 

  Tangless Inserts Installation/Removal Tools (14)

• 

  Threaded Inserts Dedicated Tools (37)

• 

  • Volume Discount

  MISUMI

  Self-Tapping Inserts / Slotted

  It is a split groove threaded insert, threaded on both the inner and outer diameters.Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	3 ～ 12	-	-

  Ordinarie pris (exklusive MOMS):

  1.24 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  RECOIL

  Insert Nitronics 60

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Nitrox 60	Metric (Coarse) Thread	3 ～ 12	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  2.80 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Stock

  KKV

  Ensat, Slotted Type 302

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	-	-	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass	Metric (Coarse) Thread	2.5 ～ 30	-	-

  Ordinarie pris (exklusive MOMS):

  0.47 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1 till 8000 stycken】

  A general-purpose well-balanced screw insert with low cost.[Features]・ At the time of press-fit, the product has direction.・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	1.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  0.16 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  KIPP

  Threaded inserts self-tapping with cutting slot (K0978)

  [Specifications]・Version 1: Self-tapping・Version 2: With cutting slot・Material: Stainless steel, Steel・Surface finish body: Bright, galvanised・D1=Internal thread: M3-M16[Features]・For making high-strength screw connections in materials with low shear strength・Guarantees secure and firm anchoring in the host material・Ideal for difficult-to-machine materials・Version: steel or stainless steel

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel / Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  0.36 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse

  An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread / Metric (Fine) Thread	2 ～ 24	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.41 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1 till 5000 stycken】

  These inserts are the best choice for easy and secure fitment into plastic holes.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	2 ～ 10	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.24 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount
  • Stock

  TOKAI METAL INDUSTRY

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1 till 5000 stycken】

  General purpose type. Low cost and well balanced.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	2 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  0.29 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Insert Nut Threaded Type / IRU

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  0.98 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Thread Inserts

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread / Metric (Fine) Thread	3 ～ 16	-	1D / 1.5D / 2D / 3D

  Ordinarie pris (exklusive MOMS):

  1.03 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount
  • Stock

  MISUMI

  Tangless Inserts Installation / Removal Tools

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  164.48 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Bit Insert

  ·Bit insert is a general-purpose type insert nut that is low cost and easy to handle. It also has excellent holding power.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	RoHS compliant (10 substances)	Resin General	Not Applicable	Brass	Metric (Coarse) Thread	2 ～ 8	-	3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 / 8.0 / 11.0

  Ordinarie pris (exklusive MOMS):

  0.31 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Tangless Insert

  The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 12	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.56 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  KIPP

  Threaded Inserts (K0398)

  [Specifications]・Version 1: Standard・Material: Steel, Stainless steel・Core drill φ(mm): 6.9-14.8・D1=Internal thread: M5-M12x1.25[Features]・Enables tapped holes which have been damaged to be used again or repaired・Suitable for use in various materials・Quick and easy installation・No other special tools are needed besides the assembly tool

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel / Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  3.69 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  NORELEM

  Threaded inserts self-tapping with cutting slot (07652)

  · For making high-strength screw connections in materials with low shear strength· Guarantees secure and firm anchoring in the host material· Ideal for difficult-to-machine materials· Version: steel or stainless steel

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Steel / Stainless steel	-	3 ～ 16	-	-

  Ordinarie pris (exklusive MOMS):

  0.43 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  NORELEM

  HeliCoil®plus threaded inserts (07645)

  · For repairing damaged threads· For making high-strength screw connections in materials with low shear strength· Resistant to corrosive action and thermal stress· High surface quality· Consisting of various threaded inserts

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1.23 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  RECOIL

  Insert, Inconel X-750

  The color of the main body will become silver when the method of heat treatment changes.Not plated. (Inconel Black Recoil)An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.[Features]· Nickel alloy.· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron	-	Inconel X-750	Metric (Coarse) Thread	3 ～ 12	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  20.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Bit Insert (Flanged) / HFB

  [Nominal of Thread (M)] 2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2 ～ 5	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  0.42 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  MISUMI

  Thread Inserts / Tangless

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 10	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  1.90 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  KKV

  Ensat, Type 308, 3-Hole / Long Size

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	-	-	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Metric (Coarse) Thread	3 ～ 16	-	-

  Ordinarie pris (exklusive MOMS):

  1.12 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KIPP

  Threaded inserts self-tapping with cutting bores (K0979)

  [Specifications]・Version 1: Self-tapping・Version 2: With cutting bore・Material: Stainless steel, Steel・D1=Internal thread: M3-M12[Features]・For making high-strength screw connections in materials with low shear strength・Guarantees secure and firm anchoring in the host material・Ideal for difficult-to-machine materials・Version: steel or stainless steel

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel / Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  0.51 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  KKV

  Ensat Three-Hole / Short 307 Type

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	-	-	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Metric (Coarse) Thread	3 ～ 16	-	-

  Ordinarie pris (exklusive MOMS):

  1.00 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  1.34 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  ACCURATE

  Dedicated Electric Tool For Tangless Insert

  Uses a brushless motor for a light weight and long life.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  808.91 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ACCURATE

  Tangless Insert Metric Insertion Tool (for Locking)

  A dedicated locking-type insertion tool.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  158.63 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KIPP

  Threaded inserts reinforced (K0399)

  [Specifications]・Version 1: Reinforced・Material: Steel, Stainless steel・Core drill φ(mm): 6.9-31・D1=Internal thread: M4-M24x2[Features]・Stronger cross section for inserts with an increased load・Enables tapped holes which have been damaged to be used again or repaired・Suitable for use in various materials・Quick and easy installation・No other special tools are needed besides the assembly tool

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel / Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  3.69 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  NORELEM

  Threaded inserts reinforced (07661)

  · Stronger cross section for inserts with an increased load· Enables tapped holes which have been damaged to be used again or repaired· Suitable for use in various materials· Quick and easy installation · No other special tools are needed besides the assembly tool

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Steel / Stainless steel	-	4 ～ 24x2	-	-

  Ordinarie pris (exklusive MOMS):

  4.43 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  ACCURATE

  Tangless Insert Insertion Tool

  A tangless insert metric coarse insertion tool.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  116.01 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  GANTER

  Stainless Steel-Insert bushings

  Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	M 8 ～ M 16	-	-

  Ordinarie pris (exklusive MOMS):

  14.22 €～

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Insert Phosphor Bronze

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Phosphor Bronze	Metric (Coarse) Thread	3 ～ 24	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  1.18 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  JAPAN DRIVE-IT

  Techlock (SL)【1 till 5000 stycken】

  [Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	-	-	Brass	Metric (Coarse) Thread	2 ～ 10	-	1D / 1.5D / 2D / 2.5D

  Ordinarie pris (exklusive MOMS):

  0.23 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  1.70 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  1.34 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse Locking

  A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 12	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.71 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  KIPP

  Assembly tools for self-tapping threaded inserts (K0978)

  [Specifications]・Type: Assembly tools・Material: Steel・Surface finish body: black oxidised, galvanised・Version 1: machine type, manual operation[Features]・Accessories for self-tapping threaded inserts with cutting slot

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  13.35 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  BOHSEI

  C Lock (CL Type)【100 stycken】

  The outer knurled form is reversed, which allows for high tensile strength and torque strength.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Resin General	-	Brass	Metric (Coarse) Thread	2 ～ 6	-	-

  Ordinarie pris (exklusive MOMS):

  12.54 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse Phosphor Bronze

  We recommend using this on anti-magnetic works or locations.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Phosphor Bronze	Metric (Coarse) Thread	3 ～ 6	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.64 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  GANTER

  Serrated locking plates, Sintered Steel

  With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  8.52 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  KIPP

  Threaded inserts reinforced internal thread self-locking (K0402)

  [Specifications]・Version 1: Self-locking・Version 2: Reinforced・Material: Stainless steel・Core drill φ(mm): 6.9-28・Surface finish body: Passivated[Features]・Enables tapped holes which have been damaged to be used again or repaired・Suitable for use in various materials・Quick and easy installation・No other special tools are needed besides the assembly tool

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Stainless steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  8.99 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  NORELEM

  Threaded inserts (07660)

  · Enables tapped holes which have been damaged to be used again or repaired· Suitable for use in various materials· Quick and easy installation· No other special tools are needed besides the assembly tool

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Steel / Stainless steel	-	5 ～ 12x1.25	-	-

  Ordinarie pris (exklusive MOMS):

  4.43 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Self-Tapping Inserts Installation Tool

  Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  100.97 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NIPPON SPREW

  Sprue (Unify) (UNF)【1 till 100 stycken】

  Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Fine) Thread	-	1/2-20 ～ #10-32	1D / 1.5D / 2D / 3D

  Ordinarie pris (exklusive MOMS):

  1.09 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  KKV

  Ensat, Chip-Free / Short, Type 337

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	-	-	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Metric (Coarse) Thread	3 ～ 12	-	-

  Ordinarie pris (exklusive MOMS):

  1.06 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Manual Pre-Winder Tool

  An insertion tool for tangless inserts. This can be used with either a standard type or a lock type.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  475.02 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • Stock

  MISUMI

  Thread Insert Removal Tool

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  30.36 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera