Insert (Length L (after insertion) (D = Thread Dia. M): 1D)

• 

  Thread Inserts - Tangless (11)

• 

  Thread Inserts (53)

• 

  Tangless Inserts Installation/Removal Tools

• 

  Threaded Inserts Dedicated Tools

• 

  • Volume Discount

  RECOIL

  Insert Nitronics 60

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Nitrox 60	Metric (Coarse) Thread	3 ～ 12	-	1D

  Ordinarie pris (exklusive MOMS):

  2.84 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1 till 8000 stycken】

  A general-purpose well-balanced screw insert with low cost.[Features]・ At the time of press-fit, the product has direction.・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	2 ～ 6	-	1D

  Ordinarie pris (exklusive MOMS):

  0.16 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse

  An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread / Metric (Fine) Thread	2 ～ 24	-	1D

  Ordinarie pris (exklusive MOMS):

  0.41 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount
  • Stock

  TOKAI METAL INDUSTRY

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1 till 3000 stycken】

  General purpose type. Low cost and well balanced.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	3 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  0.35 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1 till 800 stycken】

  These inserts are the best choice for easy and secure fitment into plastic holes.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	2.6 ～ 10	-	1D

  Ordinarie pris (exklusive MOMS):

  0.25 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Thread Inserts

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread / Metric (Fine) Thread	3 ～ 16	-	1D

  Ordinarie pris (exklusive MOMS):

  1.03 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Insert Nut Threaded Type / IRU

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  0.98 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  RECOIL

  Insert, Inconel X-750

  The color of the main body will become silver when the method of heat treatment changes.Not plated. (Inconel Black Recoil)An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.[Features]· Nickel alloy.· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron	-	Inconel X-750	Metric (Coarse) Thread	3 ～ 12	-	1D

  Ordinarie pris (exklusive MOMS):

  20.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Tangless Insert

  The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 12	-	1D

  Ordinarie pris (exklusive MOMS):

  0.56 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Bit Insert (Flanged) / HFB

  [Nominal of Thread (M)] 2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	3 ～ 4	-	1D

  Ordinarie pris (exklusive MOMS):

  0.47 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  1.34 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  1.34 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Cast Iron	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.6 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  1.70 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  MISUMI

  Thread Inserts / Tangless

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 10	-	1D

  Ordinarie pris (exklusive MOMS):

  1.90 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  JAPAN DRIVE-IT

  Techlock (SL)

  [Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	-	-	Brass	Metric (Coarse) Thread	3 ～ 10	-	1D

  Ordinarie pris (exklusive MOMS):

  0.31 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Insert Phosphor Bronze

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Phosphor Bronze	Metric (Coarse) Thread	3 ～ 24	-	1D

  Ordinarie pris (exklusive MOMS):

  1.59 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse Locking

  A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 12	-	1D

  Ordinarie pris (exklusive MOMS):

  1.00 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Metric Coarse Phosphor Bronze

  We recommend using this on anti-magnetic works or locations.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Phosphor Bronze	Metric (Coarse) Thread	3 ～ 6	-	1D

  Ordinarie pris (exklusive MOMS):

  0.64 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  NIPPON SPREW

  Sprue (Unify) (UNF)【1 till 100 stycken】

  Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Fine) Thread	-	1/4-28 ～ #10-32	1D

  Ordinarie pris (exklusive MOMS):

  1.09 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  RECOIL

  Recoil-Free (mm) SUS304

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	8 ～ 24	-	1D

  Ordinarie pris (exklusive MOMS):

  2.02 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TSUGAMI

  E-Certs

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 24	-	1D

  Ordinarie pris (exklusive MOMS):

  0.75 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Recoil Packet (mm)【5 till 10 stycken】

  [Type] Threaded Insert Use[Application] Light Metal [Materials] SUS304 with Notch[Application] Light Metal [Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)[L](D = screw diameter M) 1D 1.5D 2D [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg. [Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread / Metric (Fine) Thread	3 ～ 16	-	1D

  Ordinarie pris (exklusive MOMS):

  5.81 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  JAPAN DRIVE-IT

  Sparrow (Type SP)

  [Type] Press Fit Use[Application] Resin: General [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)[L](D = screw diameter M) 1D 1.5D 2D [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Resin General	-	Brass	Metric (Coarse) Thread	4	-	1D

  Ordinarie pris (exklusive MOMS):

  0.31 €

  Ordinarie avsändningsdatum:

  7 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  SUNCO

  Stainless Steel Tangless Insert

  [Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20[Material] Stainless Steel[Surface Processing] Bare

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 16	-	1D

  Ordinarie pris (exklusive MOMS):

  0.70 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Stock

  MISUMI

  Thread Insert (Box)【100 stycken】

  For own stockpiling or for a large number of uses, buying per carton is advantageous.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.5 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  63.26 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount
  • Stock

  RECOIL

  Recoil-Free (mm) SUS304【1 till 3 stycken】

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 42	-	1D

  Ordinarie pris (exklusive MOMS):

  0.74 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Insert SUS316

  An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4401 Equiv.)	Metric (Coarse) Thread	3 ～ 16	-	1D

  Ordinarie pris (exklusive MOMS):

  0.89 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Stock

  MISUMI

  Thread Insert (Box)【100 stycken】

  For your own stock or for a large number of uses, buying per box is beneficial.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	3 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  46.81 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1 till 15000 stycken】

  General purpose type. Low cost and well balanced.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	1.7 ～ 6	-	1D

  Ordinarie pris (exklusive MOMS):

  0.19 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Lock Recoil (Millimeter) SUS304

  Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	3 ～ 24	-	1D

  Ordinarie pris (exklusive MOMS):

  1.48 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Lock E-Sert (Fine Mesh)【1 till 100 stycken】

  [Material] Stainless Steel[Thread Size M] 8 10 12 14 16 18 20 22 27 33 36 39

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	8 ～ 33	-	1D

  Ordinarie pris (exklusive MOMS):

  0.84 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  HIROSUGI-KEIKI

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Brass	Metric (Coarse) Thread	2.6 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  0.78 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  HIROSUGI-KEIKI

  Brass Bit Insert (Standard, One Sided) / HSB

  [Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2 ～ 5	-	1D

  Ordinarie pris (exklusive MOMS):

  0.39 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Unified Coarse

  Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Coarse) Thread	-	1/4 ～ 10	1D

  Ordinarie pris (exklusive MOMS):

  0.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NIPPON SPREW

  Sprue【1 till 100 stycken】

  Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Phosphor Bronze	Metric (Coarse) Thread	2 ～ 30	-	1D

  Ordinarie pris (exklusive MOMS):

  0.90 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NIPPON SPREW

  Lock Sprue

  This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	10	-	1D

  Ordinarie pris (exklusive MOMS):

  1.76 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  TSUGAMI

  E-Sert Fine

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	10 ～ 16	-	1D

  Ordinarie pris (exklusive MOMS):

  1.17 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Dodge Bit Insert Standard SD (Brass Cadmium-Less)

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	5	-	1D

  Ordinarie pris (exklusive MOMS):

  0.57 €

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Skicka samma dag går att få

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Stainless Steel E-Sert Hemlock-Made

  [Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42[Material] Stainless Steel[Surface Processing] Bare

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	30	-	1D

  Ordinarie pris (exklusive MOMS):

  18.49 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Stainless Steel E-Sert (Unify) (UNC)【1 till 100 stycken】

  [Nominal][Material] Stainless Steel[Surface Processing] Bare

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Coarse) Thread	-	3/8-16 ～ #10-24	1D

  Ordinarie pris (exklusive MOMS):

  0.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  KS SANGYO

  Screw Reinforcement Tangless Insert【10 till 20 stycken】

  Tangless insert screw.[Features]· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.[Applications]· For reinforcement of materials such as aluminum and plastic where female threads have low strength.· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.· Repairs and reforms broken, worn out, and crushed female threads.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 12	-	1D

  Ordinarie pris (exklusive MOMS):

  14.81 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SUNCO

  E-Sert (Other Fine)【1 till 100 stycken】

  [Material] Stainless Steel[Thread Size M] 10 12 20 24 30 33 42 52

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	10 ～ 30	-	1D

  Ordinarie pris (exklusive MOMS):

  1.03 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Insert Nut (Screw-In Type) IRB-W / -CW

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Brass	Metric (Coarse) Thread	2.6 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  1.01 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Aluminum Insert Nut (Screw-In Type) IRL-B / IRL-K

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less[Treatment] Black anodized (BAL)/Kanigen plating

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Aluminum	Metric (Coarse) Thread	2 ～ 8	-	1D

  Ordinarie pris (exklusive MOMS):

  0.76 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  HIROSUGI-KEIKI

  Brass Bit Insert (Standard, Both Faces) / HSB-Z

  [Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2 ～ 5	-	1D

  Ordinarie pris (exklusive MOMS):

  0.27 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera