Registrera dig
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Type
  • Application
  • Material
  • Screw Type
  • Screw Dia. M (after insertion)(mm)
  • Thread Dia. (After inserted), Unified(inch)
  • Sales Unit
  • Tillverkare
  • CAD
    • 8 poster
    * Information om dagar till leverans, fraktkostnader och priser
    Lista
    Foto
    Jämför specifikationer
  • 1
    • Self-Tapping Inserts / Slotted
      • Volume Discount

      MISUMI

      Self-Tapping Inserts / Slotted

      It is a split groove threaded insert, threaded on both the inner and outer diameters.Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.
      Mer information
      CAD:
      2D
      /3D
      TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
      Self-Tapping-Light Metal-Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread3 ～ 12--
      Ordinarie pris (exklusive MOMS):
      1.24 €～
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Skicka samma dag går att få
      Konfigurera
    • Ensat, Slotted Type 302
      • KAMPANJFÖRSÄLJNING
      • Volume Discount
      • Stock

      KKV

      Ensat, Slotted Type 302

      Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
      Mer information
      TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
      Self-Tapping---Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / BrassMetric (Coarse) Thread2.5 ～ 30--
      Ordinarie pris (exklusive MOMS):
      0.42 €～
      Ordinarie pris (exklusive MOMS):
      Specialpris
      Ordinarie avsändningsdatum:
      Lagervara: 1 arbetsdag
      Vissa artiklar kan skickas samma dag
      Konfigurera
    • Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

        HIROSUGI-KEIKI

        Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

        [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
        Mer information
        TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
        Self-Tapping-Cast Iron-Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.6 ～ 8-1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D
        Ordinarie pris (exklusive MOMS):
        1.49 €～
        Ordinarie avsändningsdatum:
        13 arbetsdagar
        Konfigurera
      • Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

          HIROSUGI-KEIKI

          Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

          [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
          Mer information
          TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
          Self-Tapping-Cast Iron-Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.6 ～ 8-1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D
          Ordinarie pris (exklusive MOMS):
          1.18 €～
          Ordinarie avsändningsdatum:
          13 arbetsdagar
          Konfigurera
        • Ensat Expanded Slot Type, Model 302, Inch Type
          • Volume Discount

          KKV

          Ensat Expanded Slot Type, Model 302, Inch Type

          [Features]· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining. [Materials]SUM22L free-cutting steel (equivalent), hexavalent chromate
          Mer information
          TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
          Self-Tapping---SteelUnified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread-1/2" ～ No. 10-
          Ordinarie pris (exklusive MOMS):
          0.86 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
          • KAMPANJFÖRSÄLJNING

          HIROSUGI-KEIKI

          Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

          [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
          Mer information
          TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
          Self-Tapping-Light Metal-BrassMetric (Coarse) Thread2.6 ～ 8-1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D
          Ordinarie pris (exklusive MOMS):
          0.68 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Stainless Steel E-Sert (Unify) (UNC)
          • Volume Discount

          SUNCO

          Stainless Steel E-Sert (Unify) (UNC)【1 till 100 stycken】

          [Nominal][Material] Stainless Steel[Surface Processing] Bare
          Mer information
          TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
          Standard---Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Unified (Coarse) Thread-1/2-13 ～ #10-241D / 1.5D / 2D
          Ordinarie pris (exklusive MOMS):
          0.89 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW

            HIROSUGI-KEIKI

            Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW

            [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
            Mer information
            TypeEnvironmentally FriendlyApplicationProperties / applicationsMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)
            Self-Tapping-Light Metal-BrassMetric (Coarse) Thread2.6 ～ 8-1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D
            Ordinarie pris (exklusive MOMS):
            1.03 €～
            Ordinarie avsändningsdatum:
            13 arbetsdagar
            Konfigurera
        • 1

          • Nyligen visade produkter

          Kategorier som hör till Insert