Insert (3 sida)

• 

  Thread Inserts - Tangless (20)

• 

  Thread Inserts (259)

• 

  Tangless Inserts Installation/Removal Tools (14)

• 

  Threaded Inserts Dedicated Tools (37)

• 

  HIROSUGI-KEIKI

  Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R

  * Only products with slits can be used.Applicable Product Numbers: IRB-SW, IRB-SCW, IRU-SW, IRB-S, IRB-SC, IRU-S

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  20.20 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Unified Coarse

  Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Coarse) Thread	-	1/4 ～ 10	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ACCURATE

  Tangless Insert Repair Kit

  All-in-One Tool and Ball Used For Work Including Pilot Hole Work and Insertion

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	-	-	-	Metric (Coarse) Thread	-	-	1.5D

  Ordinarie pris (exklusive MOMS):

  139.07 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REYHER

  ART 88301 ENSAT-tool for inserts

  ENSAT inserts; Installation tools for thread inserts; Screwed inserts

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  161.44 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REYHER

  ART 88308 ENSAT-Thread inserts

  ENSAT inserts; Screwed inserts

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  2.50 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REYHER

  ART 88330 AMECOIL-Thread inserts

  AMECOIL inserts; AMECOIL-inserts

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  0.96 €～

  Ordinarie avsändningsdatum:

  3 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  REYHER

  DIN 7965 Screwed inserts

  RAMPA couplings; Screwed inserts; Slotted nuts

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel / Brass	-	3 ～ 12	-	-

  Ordinarie pris (exklusive MOMS):

  0.36 €～

  Ordinarie avsändningsdatum:

  2 arbetsdagar

  Konfigurera
• 

  KIPP

  Threaded insert steel self-tapping type B (K1538)

  [Specifications]・Version 1: Self-tapping・Version 2: with cutting bore・Material: Steel・Surface finish body: Galvanised・D1=Internal thread: M8[Features]・Compatible with Bosch profile・Standard thread M8・Easy to install

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Steel	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1.38 €

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount
  • Stock

  MISUMI

  Thread Insert Installation Tool

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  91.10 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  ACCURATE

  Tangless Insert Tool Replacement Hook (for Insertion Tools)

  A replacement hook for tangless insert metric coarse insertion tools. Replace the hook when it becomes damaged or worn.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  129.40 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  TSUGAMI

  E-Sert 2-Set Tap

  This is a tap that was especially designed for E-sert (helisert) bottom holes.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	Steel	Metric (Coarse) Thread	3 ～ 12	-	-

  Ordinarie pris (exklusive MOMS):

  42.36 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NIPPON SPREW

  Sprue【1 till 100 stycken】

  Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Phosphor Bronze	Metric (Coarse) Thread	2 ～ 30	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  0.90 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  NIPPON SPREW

  Lock Sprue【1 till 100 stycken】

  This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	4 ～ 10	-	1D / 1.5D / 2D / 3D

  Ordinarie pris (exklusive MOMS):

  0.93 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  TSUGAMI

  E-Sert Fine

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	10 ～ 16	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  1.17 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  TOKAI METAL INDUSTRY

  Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1 till 2000 stycken】

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Resin General	-	Brass	Metric (Coarse) Thread	2.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  0.47 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING
  • Volume Discount

  RECOIL

  Recoil Packet (UNF)【5 till 10 stycken】

  *Unfortunately, only lengths of 1.5D are available.[Features]• Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape• Insert is made one turn larger than the base material hole, and has a mild taper• Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Fine) Thread	-	1/2-20 ～ #10-32	1.5D

  Ordinarie pris (exklusive MOMS):

  7.84 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  KKV

  Iron, Ensat, with Pin / Long Type 318

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	-	-	Steel	Metric (Coarse) Thread	4 ～ 16	-	-

  Ordinarie pris (exklusive MOMS):

  5.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  JAPAN DRIVE-IT

  B-Lock Model N42

  [Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, with notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)[L](D = screw diameter M) 1.5D 2D

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	-	-	Brass	Metric (Coarse) Thread	3 ～ 6	-	1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  1.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Stainless Steel E-Sert Hemlock-Made【1 till 100 stycken】

  [Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42[Material] Stainless Steel[Surface Processing] Bare

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2.2 ～ 30	-	1D / 1.5D / 2D / 2.5D / 3D

  Ordinarie pris (exklusive MOMS):

  8.85 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Stainless Steel E-Sert (Unify) (UNC)【1 till 100 stycken】

  [Nominal][Material] Stainless Steel[Surface Processing] Bare

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Unified (Coarse) Thread	-	1/2-13 ～ #10-24	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ESCO

  Recoil Insert Thread (Coarse) EA949VD-7M【10 stycken】

  【Product Specifications】・Material-Stainless steel (SUS304)・Dim.…M7-1.0・Length (mm)…10.5・Qty. per unit…10

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  11.06 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ESCO

  Recoil Insert Thread (Coarse) EA949VD-7S【10 stycken】

  【Product Specifications】・Material-Stainless steel (SUS304)・Dim.…M7-1.0・Length (mm)…7・Qty. per unit…10

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  10.80 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  ESCO

  [UNF] Recoil Insert Thread EA949VH-19【5 stycken】

  【Product Specifications】・Material-Stainless steel (SUS304)・Dim.…5/8-18・Length (mm)…24・Qty. per unit…5

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  25.02 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  KS SANGYO

  Screw Reinforcement Tangless Insert【10 till 20 stycken】

  Tangless insert screw.[Features]· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.[Applications]· For reinforcement of materials such as aluminum and plastic where female threads have low strength.· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.· Repairs and reforms broken, worn out, and crushed female threads.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tangless	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	2 ～ 12	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  14.81 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • Volume Discount

  SUNCO

  Sprue Tongue Creasing Tool

  It is a tool that folds the tang after inserting the sprue.Press the tip against the tang and lightly hit the head with a hammer to easily break off at the notch.In addition, the snapped-off tang attaches to the magnet for confirmation on the spot.[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20[Nominal W] #2-56, #4-40, #5-40, #6-32, #8-32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	Metric (Coarse) Thread / Unified (Coarse) Thread	2 ～ 16	1/2 ～ #8-32	-

  Ordinarie pris (exklusive MOMS):

  22.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SUNCO

  Sprue Insertion Tool INP M Thread

  [Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	Metric (Coarse) Thread	2.2 ～ 20	-	-

  Ordinarie pris (exklusive MOMS):

  64.29 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SUNCO

  Sprue Insertion Tool INP Narrow Eye

  [Outer Diameter - Pitch] M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	Metric (Fine) Thread	8 ～ 20	-	-

  Ordinarie pris (exklusive MOMS):

  76.30 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SUNCO

  Insertion Tool Tangless

  [nominal size M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12 [thread type] metric (coarse) thread

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	Metric (Coarse) Thread	2 ～ 12	-	-

  Ordinarie pris (exklusive MOMS):

  158.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  SUNCO

  E-Sert (Other Fine)【1 till 100 stycken】

  [Material] Stainless Steel[Thread Size M] 10 12 20 24 30 33 42 52

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Fine) Thread	10 ～ 33	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  1.03 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Insert Nut (Screw-In Type) IRB-W / -CW

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Brass	Metric (Coarse) Thread	2.6 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  1.01 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Aluminum Insert Nut (Screw-In Type) IRL-B / IRL-K

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less[Treatment] Black anodized (BAL)/Kanigen plating

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Self-Tapping	-	Light Metal	-	Aluminum	Metric (Coarse) Thread	2 ～ 8	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D

  Ordinarie pris (exklusive MOMS):

  0.76 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Dutch Insert (Standard) / HSD

  [Nominal of Thread (M)] 2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2.6 ～ 5	-	1.5D / 2D / 2.5D / 3D / 3.5D

  Ordinarie pris (exklusive MOMS):

  0.73 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Dutch Insert (Flanged) / HFD

  [Nominal of Thread (M)] 2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2.6 ～ 5	-	2D / 2.5D

  Ordinarie pris (exklusive MOMS):

  0.84 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  HIROSUGI-KEIKI

  Brass Bit Insert (Standard, Both Faces) / HSB-Z

  [Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	1.4 ～ 5	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D

  Ordinarie pris (exklusive MOMS):

  0.24 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  • KAMPANJFÖRSÄLJNING

  HIROSUGI-KEIKI

  Brass Ultrasert IV / HUD IV

  [Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	2 ～ 10	-	1D / 1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.29 €～

  Ordinarie pris (exklusive MOMS):

  Specialpris

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  HIROSUGI-KEIKI

  Brass Ultrasert IV (Flanged) / HFU

  [Nominal of Thread (M)] 3/4/5/6/8[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Press Fit	-	Light Metal	-	Brass	Metric (Coarse) Thread	3 ～ 8	-	1.5D / 2D / 2.5D

  Ordinarie pris (exklusive MOMS):

  0.54 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  HIROSUGI-KEIKI

  Insert Nut Threaded Type Insert Jig Not Slotted Dedicated / IR-00

  * Only products without slits can be used.Applicable Product Numbers: IRB-W, IRB-CW, IRB, IRB-C, IRU-W, IRU, IRL-KW, IRL-BW, IRL-K, IRL-B

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  124.53 €～

  Ordinarie avsändningsdatum:

  13 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Coil Thread R

  · Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.· Newly-developed insertion tool reduces mistakes and increases speed of work.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	Light Metal / Cast Iron / Resin General	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Metric (Coarse) Thread	3 ～ 5	-	1.5D / 2D

  Ordinarie pris (exklusive MOMS):

  0.37 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  GANTER

  Thrust springs, Stainless Steel

  Thrust springs, Stainless Steel

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  0.56 €～

  Ordinarie avsändningsdatum:

  Lagervara: 1 arbetsdag

  Vissa artiklar kan skickas samma dag

  Konfigurera
• 

  NORELEM

  Assembly tools for self-tapping threaded inserts (07652)

  · Accessories for self-tapping threaded inserts with cutting slot

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	Steel	-	3 ～ 16	-	-

  Ordinarie pris (exklusive MOMS):

  16.02 €～

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  NORELEM

  Threaded insert, steel, self-tapping, type B (10228-01)

  · Compatible with Bosch profile· Standard thread M8· Easy to install

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Standard	-	-	-	Steel	-	8	-	-

  Ordinarie pris (exklusive MOMS):

  1.71 €

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  NORELEM

  Threaded inserts Ø30 type I (10908)

  · Lightweight version for weight-optimised structures· Different thread sizes available.· For mounting levelling feet, castors or other accessories.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  -	-	-	-	Aluminum	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  5.37 €

  Ordinarie avsändningsdatum:

  4 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  MISUMI

  Thread Insert Tang Breaking Tool

  Compatible thread inserts range from M2 to M18.

  Mer information

  CAD:

  2D

  /3D

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  23.92 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  ACCURATE

  Tangless Insert Tool Replacement Hook (for Extraction Tools)

  A replacement hook for tangless insert metric coarse extraction tools. Replace the hook when it becomes damaged or worn.[Features]· A replacement blade for tools.· The tool is included at the time of initial purchase, and is a part used for maintenance when the blades become worn or are mistakenly not included.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  129.40 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  TSUGAMI

  E-Sert Spiral Tap

  A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.

  Mer information

  Type	Environmentally Friendly	Application	Properties / applications	Material	Screw Type	Screw Dia. M (after insertion)(mm)	Thread Dia. (After inserted), Unified(inch)	Length L (after insertion) (D = Thread Dia. M)
  Tool	-	-	-	Steel	Metric (Coarse) Thread	3 ～ 8	-	-

  Ordinarie pris (exklusive MOMS):

  32.35 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera