Registrera dig
Kategori
Filtreringsvillkor

Rensa alla

  • Lager
  • Shape
  • Mounting Hole Shape
  • Nominal of Thread (R)
    • Length(mm)
    • Material
    • Surface Treatment
    • Plug Type
    • Tillverkare
    • CAD

      • Screw plugs (metric, imperial) (Nominal of Thread (R): 1/4)

        12 poster
        * Information om dagar till leverans, fraktkostnader och priser
        Lista
        Foto
        Jämför specifikationer
      • 1
        • Hex Socket Head Taper Plug, GJ Type
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          GOSHO WORKS

          Hex Socket Head Taper Plug, GJ Type【1 till 500 stycken】

          Taper plug usable in high pressure (high airtightness) conditions developed for reliability.[Features]· The GJ type plug is referred to as a "float type" (JIS type), so when it is screwed into the PT or PS female thread specified in JISB0203, the standard diameter of the taper thread is established near the center of the length (I) so that the large end service is higher than the mounting surface.· Conventionally, a PT plug with a square hole is specified by JIS in place of a hex hole for the GJ type, but recently in order to improve the safety and work efficiency of tightening, hex socket head GJ plugs capable of reliable tightening have come to be used in various quarters.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--11Stainless Steel ～ SteelNot Provided ～ Tempered Collar
          Ordinarie pris (exklusive MOMS):
          1.08 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Plastic Hex Socket Head Taper Plug
          • Volume Discount

          SUNCO

          Plastic Hex Socket Head Taper Plug

          Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.
          Mer information
          CAD:
          2D
          /3D
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--11PlasticNot Provided
          Ordinarie pris (exklusive MOMS):
          10.80 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Plug -SH (Square Head)
          • Volume Discount

          SUNCO

          Plug -SH (Square Head)

          [Material] Steel, stainless steel SUS316L Stainless steel[Surface treatment] Untreated, chromate, bright chromate, black oxide film
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          Square HeadNo Screw Hole-1/4--11Stainless Steel ～ SteelChromate ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.76 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Square Head Taper Plug, SH Type
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          NISSAN SCREW

          Square Head Taper Plug, SH Type

          It is a tapered tap that can be used as a stopcock, etc. for general piping.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          Square HeadNo Screw Hole-1/4--11SteelBarrel, Passivation ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.69 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Skicka samma dag går att få
          Konfigurera
        • Hex Socket Head Taper Plug (Sink)
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          SUNCO

          Hex Socket Head Taper Plug (Sink)【1 till 250 stycken】

          Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--9 ～ 10Stainless Steel ～ SteelChromate ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.47 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Hex Socket Head Taper Plug, Float Type, A Type
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          NISSAN SCREW

          Hex Socket Head Taper Plug, Float Type, A Type

          Depending on the position of the reference diameter, there are two types: the sinking type and the floating type. [Features]They are used for sealing in areas such as hydraulic systems, pneumatic systems, pumps and automobiles.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--11SteelBarrel, Passivation ～ Black Oxide
          Ordinarie pris (exklusive MOMS):
          0.29 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Hex Socket Head Taper Thread Plug with Square Head - SH Type
          • Volume Discount

          SAKAMURA

          Hex Socket Head Taper Thread Plug with Square Head - SH Type

          [Material] Steel, stainless steel[Surface treatment] None, chromate plating, bright chromate plating
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          Square HeadNo Screw Hole-1/4--20Stainless Steel ～ SteelBlack Oxide ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.65 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Hex Socket Head Taper Plug, Sink Type, B Type
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          NISSAN SCREW

          Hex Socket Head Taper Plug, Sink Type, B Type

          The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment. Hardness 32 to 42HRC product.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--9SteelBlack Oxide ～ Chromate
          Ordinarie pris (exklusive MOMS):
          0.48 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Hex Socket Head Taper Plug, Sink Type, NB Type
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          NISSAN SCREW

          Hex Socket Head Taper Plug, Sink Type, NB Type

          The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--9SteelBlack Oxide
          Ordinarie pris (exklusive MOMS):
          0.32 €
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • GOSHO (GM)
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          GOSHO WORKS

          GOSHO (GM)【1 till 500 stycken】

          [Features]· The GM type plug is a level seal type (flush type) developed by Gosho. When the plug is screwed into PT (pipe taper) female threading specified in JISB0203, a reference diameter is established near the large end face so that its large end face is almost flush with the mounting face.· It recently has become the indispensable primary plug for hydraulic and pneumatic equipment.· It has the advantages of a GM type plug and is a level seal type, so it becomes flush with the embedded and installed main body for a pleasing external appearance and also facilitates miniaturization of machinery· Comes with a tightening interference, which enables substantial tightening, allowing it to withstand great internal pressure.· The plug is subject to cold plastic working for high precision, and is heat processed to allow it to be used under high pressure.
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--8.9Stainless Steel ～ SteelBright Chrome Plating ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.60 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Hex Socket Head Taper Thread Plug (Float)
          • KAMPANJFÖRSÄLJNING
          • Volume Discount
          • Stock

          SUNCO

          Hex Socket Head Taper Thread Plug (Float)【1 till 400 stycken】

          [Material] Steel, stainless steel SUS316L Stainless steel[Surface treatment] chromate, trivalent chromate (trivalent white), nickel plating, bright chromate, black oxide film
          Mer information
          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--11Stainless Steel ～ SteelChromate ～ Not Provided
          Ordinarie pris (exklusive MOMS):
          0.48 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Stocking Plug (Sunken) Gosho Industrial
          • Volume Discount

          SUNCO

          Stocking Plug (Sunken) Gosho Industrial

          ShapeMounting Hole ShapeNominal of Thread (M)Nominal of Thread (R)Nominal of Thread (G)Nominal of Thread (NPT/NPTF)Length(mm)MaterialSurface Treatment
          StandardHex Socket-1/4--8.9SteelNot Provided
          Ordinarie pris (exklusive MOMS):
          1.04 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
      • 1

        • Nyligen visade produkter

        Kategorier som hör till Screw plugs (metric, imperial)